auszookers.com
http://auszookers.com/forum/

ifs Hilux steering box, custom rear full floater etc
http://auszookers.com/forum/viewtopic.php?f=7&t=47821		 Page 1 of 2
Author:  tanshi [ Wed Sep 17, 2014 4:29 pm ]
Post subject:  ifs Hilux steering box, custom rear full floater etc
WT/vitara full floating rear diff housing, Trussed, shaved, CJ7 hubs and spindles for bigger axle shafts $150

4.6 12 bolt rear vitara third member, + Grand vitara third member housing $150

4.6 12 bolt rear vitara third member, + Grand vitara third member housing $150

H3 hummer airlocker side gears. 28 spline fit vitara airlocker rd209 $150

twin stick offroad chromo steering arms to fit LJ to WT diffs. $300

New 30.5mm axle shafts for above. 27 spline outer, 28 spline inner. ~3mm bigger than sierra rear axles $500

Left hand drive, IFS hilux steering box handed to fit where standard box does $400ono

4.6 12 bolt rear vitara third member pending

vitara 12 bolt rd209 airlocker new in box, will take h3 hummer side gears pending
WT/vitara front diff housing, trussed, shaved. sierra outer knuckles, hubs etc $150 SOLD
Chromo WT cvs, short and longside shafts replaced with hytuf shafts $400 pending
Vitara lwb disk brakes. calipers and vented disks $200 SOLD
KPD4x4 alloy beadlock wheels x 5 still in bubble wrap, $1200 SOLD
4x brand new custom made cj7 front length springs 100mm longer than EFS rears with sierra sized bush ends $100 per spring 2 x sold 2 x pending

Image
Image
Image
Image
Author:  Zook_Fan [ Wed Sep 17, 2014 7:55 pm ]
Post subject:  Re: Looking at my options. Possible part out.
I'll take the steering arms
Author:  tanshi [ Thu Sep 18, 2014 7:49 am ]
Post subject:  Re: Looking at my options. Possible part out.
hmm, thought there would be more interest.
Author:  Zook_Fan [ Thu Sep 18, 2014 8:13 am ]
Post subject:  Re: Looking at my options. Possible part out.
Look around the site at the moment, there's a crazy amount of Jimny crap going on and nobody playing with Sierra's and LJ's. Most of the stuff you've got is high performance gear that takes a while to sell regardless. I'd like the Vit locker, AW4 and the 4.1 transfer if you'd separate the doubler but the freight would kill the price for most of those things.
Author:  remydog05 [ Thu Sep 18, 2014 8:25 pm ]
Post subject:  Re: Looking at my options. Possible part out.
Ah well no one wants the gear so you will just have to finish it!!!
Author:  suz_rolly [ Thu Sep 18, 2014 8:34 pm ]
Post subject:  Re: Looking at my options. Possible part out.
id be interested in body and chassis do you still have the original front guards to go with it ?
Author:  tanshi [ Fri Sep 19, 2014 7:59 am ]
Post subject:  Re: Looking at my options. Possible part out.
I have an original set of guards yes.
Author:  suz_rolly [ Sun Sep 21, 2014 11:02 pm ]
Post subject:  Re: Looking at my options. Possible part out.
tanshi wrote:
I have an original set of guards yes.


Ok sounds good to me tell me when the part out gets closer so i can sort things out my end !!!
Author:  VitNick [ Tue Sep 23, 2014 7:39 pm ]
Post subject:  Re: Looking at my options. Possible part out.
If It's possible to get the aw4 and transfer setup to Sydney I would be keen (forklift pallet?).
Author:  burls [ Tue Sep 23, 2014 8:17 pm ]
Post subject:  Re: Looking at my options. Possible part out.
WT front chromos??
Author:  atari4x4 [ Tue Sep 23, 2014 8:46 pm ]
Post subject:  Re: Looking at my options. Possible part out.
sell the LJ stuff & acquire carry van ute cab, build the first carry van TT.

diff out the front, 13b 6 port/C4 auto/lux case, front mounted, linked on cruiser diffs, rad & fuel cell in the back... essentially a cab, some tube & a drive train.

© atari4x4 2014
Author:  tanshi [ Wed Sep 24, 2014 8:08 am ]
Post subject:  Re: Looking at my options. Possible part out.
burls wrote:
WT front chromos??


yeah there are chromos there but would rather sell with the custom vitara housings complete if I can.
Author:  tanshi [ Wed Nov 05, 2014 9:51 am ]
Post subject:  Re: Parting out some stuff from my build
Decision made. selling some stuff. keeping some stuff. first post updated
Author:  Teracis [ Wed Nov 05, 2014 3:21 pm ]
Post subject:  Re: Parting out some stuff from my build
Hey tanshi, any chance you'd take less than the $1200 you're asking for those beadlocks?
Author:  tanshi [ Wed Nov 05, 2014 3:57 pm ]
Post subject:  Re: Parting out some stuff from my build
its a set of 5, they have been in my wardrobe for 3 years. $350 each was new price.
your welcome to offer but if I am loosing to much on them I wont be selling

price up any other alloy beadlock and tell me they aren't worth what im asking
Author:  Teracis [ Wed Nov 05, 2014 6:59 pm ]
Post subject:  Re: Parting out some stuff from my build
Hey man all good I didn't realise it was 5 and then checked the original price. I was aiming around $1000 but given the circumstances that's likely a bit lowball.

I will check how far I can stretch the funds.
Author:  tanshi [ Wed Nov 05, 2014 7:39 pm ]
Post subject:  Re: Parting out some stuff from my build
No probs. Let me know.
Author:  DarkHorse [ Thu Nov 06, 2014 7:13 am ]
Post subject:  Re: Parting out some stuff from my build
PM sent re: locker...
Author:  tanshi [ Thu Nov 06, 2014 8:28 am ]
Post subject:  Re: Parting out some stuff from my build
replied
Author:  Teracis [ Fri Nov 07, 2014 6:53 pm ]
Post subject:  Re: Parting out some stuff from my build
Hey man I checked the funds and it turns out I'm far poorer than I thought, good luck with the sale those rims should go soon surely.
Author:  tanshi [ Wed Nov 19, 2014 8:21 am ]
Post subject:  Re: Parting out some stuff from my build
decided to part the diffs.
Author:  burls [ Wed Nov 19, 2014 8:27 am ]
Post subject:  Re: Parting out some stuff from my build
Chromos??
Author:  tanshi [ Wed Nov 19, 2014 9:04 am ]
Post subject:  Re: Parting out some stuff from my build
as above, yep. Chromo WT cvs, short and longside shafts replaced with hytuf shafts $400
Author:  Zook_Fan [ Wed Nov 19, 2014 9:10 am ]
Post subject:  Re: Parting out some stuff from my build
What width are the diffs set for? How long are the shafts?

Specs on the front WT diff? Is it for a Vit centre or WT?
Author:  tanshi [ Wed Nov 19, 2014 9:14 am ]
Post subject:  Re: Parting out some stuff from my build
Diffs are WT width on NT width spring lands.

are you talking about the front shafts or the rear shafts?
Author:  Zook_Fan [ Wed Nov 19, 2014 9:16 am ]
Post subject:  Re: Parting out some stuff from my build
Rear shafts.
Author:  tanshi [ Wed Nov 19, 2014 9:35 am ]
Post subject:  Re: Parting out some stuff from my build
they haven been made yet, so don't have exact measurements for them.

if you need some I can get them made though
Author:  buzbox [ Wed Nov 19, 2014 10:09 am ]
Post subject:  Re: Parting out some stuff from my build
I'm keen on the steering arms if Zook_Fan doesn't grab them.
Author:  tanshi [ Wed Nov 19, 2014 10:36 am ]
Post subject:  Re: Parting out some stuff from my build
zook_fan needs wt to wt arms. not lj to wt
Author:  Zook_Fan [ Wed Nov 19, 2014 10:44 am ]
Post subject:  Re: Parting out some stuff from my build
Yep I'm not getting the steering arms.

Pm'd tanshi
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/