auszookers.com
http://auszookers.com/forum/

98-05 grand vitara jimny bits 2" lifted rear springs
http://auszookers.com/forum/viewtopic.php?f=7&t=49802		 Page 1 of 1
Author:  2000 gv [ Fri Apr 10, 2015 7:24 pm ]
Post subject:  98-05 grand vitara jimny bits 2" lifted rear springs
98-05 grand vitara jimny bits 2" lifted rear springs

These coils are pretty much brand new. I only replaced them because I needed uprated ones to take the weight of my draws. Would cost over $250 new

$100 Ono located in perth but will post at buyer cost


[img][IMG]http://i1380.photobucket.com/albums/ah182/Johno1811/image.jpg1_zps1hmrpd83.jpg[/img][/img]

Image
Author:  zook_ute [ Thu Apr 16, 2015 12:19 pm ]
Post subject:  Re: 98-05 grand vitara jimny bits 2" lifted rear springs
Can anyone tell me if these springs would suit my 1995 se416 swb, my car is currently fitted with a calmini 3" kit and i would like to lower the rear to hopefully eliminate some tail shaft and noise and vibrations. I cant seem to get rid of it no matter were i have the heim joint wound to.

Any help would be great
Author:  2000 gv [ Thu Apr 16, 2015 8:19 pm ]
Post subject:  Re: 98-05 grand vitara jimny bits 2" lifted rear springs
They have been sold :/ but from what I've seem on other forums they do fit but they lift the vitaras by an extra 1.5" so you would get 3.5" lift out of them. They would also be a rough ride because there made to take the weight of a gv.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/