auszookers.com
http://auszookers.com/forum/

Marut canopy, tray, 4 speed gearbox, 1.0 transfer - VI
http://auszookers.com/forum/viewtopic.php?f=7&t=49946
Page 1 of 1

Author:  Kindersuprise [ Mon Apr 27, 2015 8:36 pm ]
Post subject:  Marut canopy, tray, 4 speed gearbox, 1.0 transfer - VI

Will get some photos up shortly. Off a 94 stockman. Other parts available just ask. Diffs, chassis, and bikini top accounted for.

Transfer $100

Gearbox $100

Tray $100

Motor (apparently runs but Is smokey) $50

Located mt martha vic.

Will swap certain parts for a rust free, straight rear end and bumper to allow my to complete my bobbed rear end conversion on my lwb. This would require me coming over and cutting the back end off the body from back of rear wheel arches. Would swap maruti rear window piece and firewall to suit for reduction gears.

Author:  rwt65 [ Tue Apr 28, 2015 6:53 am ]
Post subject:  Re: 1.0 motor, stockman tray, 4 speed gearbox, 1.0 transfer

Pics of the tray and sides?

Author:  beef13 [ Tue Apr 28, 2015 6:01 pm ]
Post subject:  Re: 1.0 motor, stockman tray, 4 speed gearbox, 1.0 transfer

Second that request for the tray and sides please!! I'd drive to Vic for that.

Author:  Kindersuprise [ Tue Apr 28, 2015 6:26 pm ]
Post subject:  Re: 1.0 motor, stockman tray, 4 speed gearbox, 1.0 transfer

Sorry should have pointed out tat there are no sides for it

Author:  Kindersuprise [ Tue Apr 28, 2015 6:27 pm ]
Post subject:  Re: 1.0 motor, stockman tray, 4 speed gearbox, 1.0 transfer

Will have photos up in next hour.

Author:  Kindersuprise [ Tue Apr 28, 2015 6:34 pm ]
Post subject:  Re: 1.0 motor, stockman tray, 4 speed gearbox, 1.0 transfer

Here is a link. Can't work out how to get photos up on here. Bloke I bought it off took the sides off and I didn't even notice cause I was in such a hurry. They are about 6 hours too far away to go back for. https://m.facebook.com/photo.php?fbid=7 ... &source=43

Author:  Kindersuprise [ Fri May 01, 2015 5:30 pm ]
Post subject:  Re: 1.0 motor, stockman tray, 4 speed gearbox, 1.0 transfer

Canopy now for sale with firewall. Would swap for reduction gears.

Author:  Kindersuprise [ Mon May 04, 2015 8:37 pm ]
Post subject:  Re: Marut canopy, tray, 4 speed gearbox, 1.0 transfer - VI

Chassis available. $150 or swap for 3.7 diff set.

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/