auszookers.com
http://auszookers.com/forum/

parting zook - unfinished project
http://auszookers.com/forum/viewtopic.php?f=7&t=51056
Page 1 of 2

Author:  danw [ Tue Sep 22, 2015 2:57 am ]
Post subject:  parting zook - unfinished project

Hey guys
So unfortunately I have to part my project swb zook.. :(
Everything in caboolture qld
[ ] 1pair tsor 2"shackles $50
[ ] 1pair hmade 2"shackles not pretty but do the job $30
[ ] 1 pairs of iron man rear springs 2" $60
[ ] 4x 1.5inch lror wheel spacers $120
[ ] 5 Silverstone extreme 33x11.5 on 15inch black sunnys -23 offset and new only used for fitting $1400
[ ] Fuel tank no dents $120
[ ] front drive shaft nt $50
[ ] rear drive shaft nt $50
[ ] 1" drive shaft spacer nt $50
[ ] windscreen surround. Fold down. Miniimal rust. Good glass. $250
[ ]30s x4 pn sunnys 30x9.5x15 $200
Pics to come
More parts I may have forgot.
Msg on here or text my phone no calls as I work nightahift and will most probablyb e asleep... 0400273514
https://www.dropbox.com/sh/2hdyu6lfkaesj97/AACLFmK_CGDZFHeRx-XiGmBsa?dl=0

Author:  skitzlux [ Tue Sep 22, 2015 11:17 am ]
Post subject:  Re: parting zook - unfinished project

Messaged about the transfer case

Author:  Nzkarta23 [ Wed Sep 23, 2015 2:27 pm ]
Post subject:  Re: parting zook - unfinished project

Is rear diff complete

Author:  danw [ Wed Sep 23, 2015 6:09 pm ]
Post subject:  Re: parting zook - unfinished project

Yes rear diff is complete minus rbrake hose.

Author:  pezz [ Wed Sep 23, 2015 7:55 pm ]
Post subject:  Re: parting zook - unfinished project

Got any drive shaft spacers?

Author:  kenzook [ Thu Sep 24, 2015 11:58 am ]
Post subject:  Re: parting zook - unfinished project

any pics yet? roll cage, bikini top.

Author:  danw [ Thu Sep 24, 2015 2:40 pm ]
Post subject:  Re: parting zook - unfinished project

This weekend kenzook

Author:  danw [ Thu Sep 24, 2015 2:40 pm ]
Post subject:  Re: parting zook - unfinished project

Ok sent pezz

Author:  Hybrid [ Fri Sep 25, 2015 10:35 am ]
Post subject:  Re: parting zook - unfinished project

Hi Dan,

Dibs on the following! :D

Front Diff Hub to Hub
Rear Diff With Lockright
One pair of 2"Springs
Seat Rails

I'd should be able to head up on Sunday.

Cheers,

John

Author:  Myles [ Tue Sep 29, 2015 12:56 am ]
Post subject:  Re: parting zook - unfinished project

I'll take the bikini top if it's in good condition with no holes or rips!

Author:  Chester [ Tue Sep 29, 2015 9:21 am ]
Post subject:  Re: parting zook - unfinished project

Does the engine come with the ECU and loom?

Author:  danw [ Tue Sep 29, 2015 1:31 pm ]
Post subject:  Re: parting zook - unfinished project

Chester wrote:
Does the engine come with the ECU and loom?


Yess it does.

Author:  danw [ Tue Sep 29, 2015 1:43 pm ]
Post subject:  Re: parting zook - unfinished project

Myles wrote:
I'll take the bikini top if it's in good condition with no holes or rips!


It's yours mate
Let me know when you want to come pick itup

Author:  MarutiGypsy [ Tue Sep 29, 2015 4:15 pm ]
Post subject:  Re: parting zook - unfinished project

Pm sent

Author:  danw [ Thu Oct 01, 2015 5:33 pm ]
Post subject:  Re: parting zook - unfinished project

Pictures in link...

Author:  danw [ Tue Oct 06, 2015 6:05 am ]
Post subject:  Re: parting zook - unfinished project

Updated with sold items marked sold.

Author:  danw [ Fri Oct 09, 2015 6:00 pm ]
Post subject:  Re: parting zook - unfinished project

Bump.
Need to move the last of the parts asap
Throw me an offer on what you need worst i can say is no!

Author:  danw [ Fri Oct 23, 2015 1:35 pm ]
Post subject:  Re: parting zook - unfinished project

Bump bump

Author:  dougies_tx5turbo [ Fri Oct 23, 2015 5:31 pm ]
Post subject:  Re: parting zook - unfinished project

Txt sent about the seats and motor pick up

Author:  Pico42 [ Sat Oct 24, 2015 5:52 am ]
Post subject:  Re: parting zook - unfinished project

What width are the rims with the Silverstones on them?

Author:  danw [ Sat Oct 24, 2015 6:27 am ]
Post subject:  Re: parting zook - unfinished project

15x8 from memory budd

Author:  danw [ Sat Oct 24, 2015 8:24 am ]
Post subject:  Re: parting zook - unfinished project

Also have some 30s x4 pn sunnys
30x9.5x15
$250

Author:  mighty_vites [ Tue Nov 24, 2015 6:37 pm ]
Post subject:  Re: parting zook - unfinished project

SOLD on the TSOR shackles mate.

Author:  danw [ Wed Nov 25, 2015 9:55 am ]
Post subject:  Re: parting zook - unfinished project

mighty_vites wrote:
SOLD on the TSOR shackles mate.

Yup still available

Author:  mighty_vites [ Thu Nov 26, 2015 12:29 pm ]
Post subject:  Re: parting zook - unfinished project

Check your PMS danw

Author:  danw [ Fri Jan 15, 2016 10:28 am ]
Post subject:  Re: parting zook - unfinished project

BUMP!
Updated first post.
Need to get rid of last parts to clean up garage. .
Make me an offer worst i can say is no.

Author:  Zooksta515 [ Tue Feb 02, 2016 10:53 pm ]
Post subject:  Re: parting zook - unfinished project

Need combination switch sj80 04/96 +

Author:  Zooksta515 [ Tue Feb 02, 2016 10:54 pm ]
Post subject:  Re: parting zook - unfinished project

Need combination switch sj80 04/96 +

Author:  danw [ Tue Feb 02, 2016 11:25 pm ]
Post subject:  Re: parting zook - unfinished project

Cant help sorry zooksta515

Author:  Bulldog 61 [ Fri Feb 05, 2016 6:14 pm ]
Post subject:  Re: parting zook - unfinished project

danw wrote:
Also have some 30s x4 pn sunnys
30x9.5x15
$250

Got any pics? what offset rims?

Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/