| auszookers.com http://auszookers.com/forum/ |
|
| [VIC] Stripping Twin Locked 1.6l EFI Holden Drover http://auszookers.com/forum/viewtopic.php?f=7&t=53095 |
Page 1 of 1 |
| Author: | Chris.L [ Wed Aug 24, 2016 8:58 am ] |
| Post subject: | [VIC] Stripping Twin Locked 1.6l EFI Holden Drover |
Hi Guys, I'm stripping my 1984 Holden Drover, at this stage everything is for sale other than shell once the Diffs + Engine sell. All parts are located Melbourne S/E suburbs, postage can be negotiated for items. Engine/Driveline package - $2000 2000 Suzuki Baleno G16B coilpack motor. Rear Wheel drive converted motor Modified Sump to suit Sierra Conversion Mounting kit to suit 1.3 sierra Aftermarket Highflow extractors to suit Sierra w/ 2" Exhaust to rear diff Aftermarket radiator with hoses Clutch fan Wiring loom/ECU modified to suit Sierra 1.3 Gear box 500km old Exeedy Heavy duty clutch Input to transfer case shaft all parts/hoses to suit 1.3 conversion into sierra This is a motor package that was in a 1.3 Sierra running and driving, will just need a new fueltank or fuel set-up to suit. Can include fuel set-up (surgetank + pumps + Tank + lines) for an additional $150. Diffs - $1,400 1.3lt Narrow track Sierra Diffs w/ Brakes, hubs and draglink. F - Near new ARB Airlocker w/ Compressor, switches and loom to run locker R - Spartan Auto Locker Airlocker + Compressor was fitted 500km ago and is in near new condition (1 drive old) This will include everything to fit to a car + Wire up compressor and drive. Holden Drover Front Clip w/ no rust $350 This includes - Drivers Guard (has a dint on front corner) Passanger Guard Headlights + Headlight Assembly Grill Bonnet Airtek Snorkel Overall the condition is good, does have some dints and scratches, however no rust or un-repairable damage. 1.3lt Transfer case - $250 Standard with no reduction gears, Case is un-damaged and all gears work. Wheels/Tyres - $600 15x7-12 Dynamic Steel Rims x4 30" Goodridge Mud Tyres w/ 70% tread 1.3lt NT chassis w/ RUF Mod + 2" lift to suit - $300 1984 SJ50 NT chassis w/ RUF Chassis extension mod 4x 2" lift rear leafs 2x 500km old long travel shocks (rear) 2x long travel shocks (front) 4x Extended shackles Bullbar + Winch - $300 M9000 Warn Winch with Controlbox (no controller) Modified Winchbar (no mounts to suit sierra) EFI Fuel set-up + Sierra Fuel tank $250 Standard Sierra Fuel tank (no rust) Surgetank EFI fuel pump Lift pump Fuel filter Lines to suit tank + pumps Bucket Seats w/ Rails to suit Sierra + Harness- $150 Aftermarket bucket seats (unknown model) in good condition Rails welded to seats to suit sierra Harness for driver Drop Shackles - $150 Good condition, unknown brand Lots more will be for sale once the car is 100% confirmed as stripping, doors, dash ect. Contact Rian: 0409427391 Photos can be sent on reqeust Thanks for reading |
|
| Author: | steve125 [ Wed Aug 24, 2016 12:59 pm ] |
| Post subject: | Re: [VIC] Stripping Twin Locked 1.6l EFI Holden Drover |
Chris.L wrote: Bullbar + Winch - $300 M9000 Warn Winch with Controlbox (no controller) Modified Winchbar (no mounts to suit sierra) What sort of bar is it? Is the winch cable rope or wire? |
|
| Author: | Joshyboy26 [ Sun Sep 04, 2016 1:26 pm ] |
| Post subject: | Re: [VIC] Stripping Twin Locked 1.6l EFI Holden Drover |
How much for juat the bonnet |
|
| Author: | suzukikid [ Tue Sep 06, 2016 3:38 pm ] |
| Post subject: | Re: [VIC] Stripping Twin Locked 1.6l EFI Holden Drover |
You have a message mate |
|
| Author: | Luke280794 [ Thu Mar 09, 2017 9:39 pm ] |
| Post subject: | Re: [VIC] Stripping Twin Locked 1.6l EFI Holden Drover |
Are drop shackles and bullbar still for sale |
|
| Author: | Chris.L [ Fri Mar 10, 2017 7:29 am ] |
| Post subject: | Re: [VIC] Stripping Twin Locked 1.6l EFI Holden Drover |
Luke280794 wrote: Are drop shackles and bullbar still for sale All gone now sorry! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|