IMG_0782 by Jonathan Smith, on Flickr
IMG_0784 by Jonathan Smith, on Flickr
IMG_0790 by Jonathan Smith, on Flickr
| auszookers.com http://auszookers.com/forum/ |
|
| vic swb rear bar for 2" lift http://auszookers.com/forum/viewtopic.php?f=7&t=53853 |
Page 1 of 1 |
| Author: | jonfromhamilton [ Sat Feb 04, 2017 8:40 pm ] |
| Post subject: | vic swb rear bar for 2" lift |
Rear bar to suit SWB with 2" body lift. Madenfrom 2.5mm steel. Has large hitch reciever and runs stock lights. Comes with 2 cut down 2" lift blocks to suit. Has grip tape and will come with lockable hitch pin although the chrome is a bit flakey on it. Just had a bit of fresh paint. The sides line up with the wheel arches as i ran garden edging flares which also bolted to the rear bar. You may have to cut the stock metal flares an inch or 2 to suit. The bolts that u have with your body lift blocks should work but i cant really remember if i had to get new ones for this. https://flic.kr/p/RKYX3u https://flic.kr/p/RCLhFa https://flic.kr/p/RCLoPH https://flic.kr/p/RCLngH Located carrum downs. I may be able to deliver in SE suburbs. $250 0426287866 |
|
| Author: | jonfromhamilton [ Sun Feb 05, 2017 1:33 am ] |
| Post subject: | Re: vic swb rear bar for 2" lift |
| IMG_0782 by Jonathan Smith, on FlickrIMG_0784 by Jonathan Smith, on FlickrIMG_0790 by Jonathan Smith, on Flickr
|
|
| Author: | jonfromhamilton [ Sun Feb 05, 2017 1:33 am ] |
| Post subject: | Re: vic swb rear bar for 2" lift |
sorry about the size of those pics |
|
| Author: | jonfromhamilton [ Sat Feb 11, 2017 12:14 pm ] |
| Post subject: | Re: vic swb rear bar for 2" lift |
SOLD |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|