| auszookers.com http://auszookers.com/forum/ |
|
| WT : Insulated cold room panels http://auszookers.com/forum/viewtopic.php?f=8&t=10206 |
Page 1 of 1 |
| Author: | Rusho [ Fri Mar 05, 2010 1:09 am ] |
| Post subject: | WT : Insulated cold room panels |
Hi All, As above I need to get my hands on some insulated cold room panels or something very similar.. I need them to build a specific sized esky to transport a 10 litre keg of beer  Yes mobile beer....If someone has some, or knows were I can get some at a reasonable cost please let me know.
Cheers |
|
| Author: | bigrig91 [ Fri Mar 05, 2010 1:18 am ] |
| Post subject: | Re: WT : Insulated cold room panels |
will keep my eyes open. how big do the panels have to be? |
|
| Author: | Rusho [ Fri Mar 05, 2010 1:28 am ] |
| Post subject: | Re: WT : Insulated cold room panels |
Cheers mate. 4 pieces @ 700x400 and 2 @ 400x400 could possibly go a tiny bit smaller |
|
| Author: | Crunched [ Sun Mar 07, 2010 1:34 am ] |
| Post subject: | Re: WT : Insulated cold room panels |
Not sure if it'll fit your 10L keg, but I use one of those Gatorade round eskies to transport my little 9L corny keg around. Fits the keg, a small co2 bottle, fittings and ice. I found my in kmart for $80, but I think you can get similar ones for cheaper. Otherwise, just a standard esky will do the job won't it? What sort of keg is it? Are you homebrewing? |
|
| Author: | Rusho [ Sun Mar 07, 2010 1:42 am ] |
| Post subject: | Re: WT : Insulated cold room panels |
Thanks for that....yeh home brew. I will look into it. I'm using the 19 litre kegs. I was going to chop one up but have decided against it now. Bit of a waste. |
|
| Author: | Crunched [ Sun Mar 07, 2010 1:45 am ] |
| Post subject: | Re: WT : Insulated cold room panels |
Ah, in that case - the small wheelie bins at bunnings are perfect for the 19L jobbies. But I'd recommed splashing out on one of the 9L ones: http://craftbrewer.com.au/shop/details.asp?PID=1081 They're a bit exy, but well worth it for BBQs and Parties. Not much chop for a 4wd trip though, as they only hold about a case worth of beer. Do you do kits or all-grain? |
|
| Author: | 09zooky [ Tue Mar 09, 2010 1:52 pm ] |
| Post subject: | Re: WT : Insulated cold room panels |
hey found some on another site http://www.qldaf.com/forum/viewtopic.php?f=9&t=24046 |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|