I have a WT 1991 centre for sale.. done around 1000k since a rebuild. PM me with an offer if your keen
| auszookers.com http://auszookers.com/forum/ |
|
| wanted rear diff for sierra! http://auszookers.com/forum/viewtopic.php?f=8&t=10654 |
Page 1 of 1 |
| Author: | zookfun [ Thu Mar 25, 2010 4:42 pm ] |
| Post subject: | wanted rear diff for sierra! |
Just after a rear diff for my sierra/drover... Let me know what you have! CHEERS |
|
| Author: | zookfun [ Mon Mar 29, 2010 8:00 pm ] |
| Post subject: | Re: wanted rear diff for sierra! |
does anyone have one spare?? |
|
| Author: | Ben_Sierra [ Mon Mar 29, 2010 9:04 pm ] |
| Post subject: | Re: wanted rear diff for sierra! |
WT or NT?? PM want33s he may have one... He's in QLD though not sure who in SA would have one... |
|
| Author: | jonno_racing [ Mon Mar 29, 2010 9:22 pm ] |
| Post subject: | Re: wanted rear diff for sierra! |
i can grab one off mike for you? |
|
| Author: | BlueSuzy [ Tue Mar 30, 2010 3:17 am ] |
| Post subject: | Re: wanted rear diff for sierra! |
Grab a cheaper front diff same ratio. Measure backlash. Put the rear 4pin carrier in it, With the existing front matching gearset crownwheel. Adjust to correct backlash. Viola! A better rear diff. If you get a front one out of a stocker, They are not used much! If at all! I did mine last friday..Rears were $275 or another place wanted $385... I got a front from the 1st place for $185. |
|
| Author: | zookernator [ Tue Mar 30, 2010 9:17 pm ] |
| Post subject: | Re: wanted rear diff for sierra! |
I have a WT 1991 centre for sale.. done around 1000k since a rebuild. PM me with an offer if your keen
|
|
| Author: | zookfun [ Tue Mar 30, 2010 9:43 pm ] |
| Post subject: | Re: wanted rear diff for sierra! |
its a drover so Im pretty sure in NT unfortunately! (drovers are NT arent they?) Yeah if you can check with mike that would be great! Thanks bluesuzy- if I still cant get one I might look into doing a front diff... |
|
| Author: | BlueSuzy [ Wed Mar 31, 2010 3:33 am ] |
| Post subject: | Re: wanted rear diff for sierra! |
What ratio are they? 3.9 is norm for NT. 3.7 is norm for WT. |
|
| Author: | want33s [ Wed Mar 31, 2010 12:26 pm ] |
| Post subject: | Re: wanted rear diff for sierra! |
Drovers are NT 3.9:1 and are 4 pinion front AND rear. Only difference between front/rear diff is front = 22spline & rear = 26 spline. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|