| auszookers.com http://auszookers.com/forum/ |
|
| swap a good rear air locker for a front air locker http://auszookers.com/forum/viewtopic.php?f=8&t=11344 |
Page 1 of 1 |
| Author: | oozuk [ Thu Apr 22, 2010 10:49 am ] |
| Post subject: | swap a good rear air locker for a front air locker |
i want to swap my front ARB air locker for a rear ARB air locker my locker has 4.6 gears fitted but i can change that whatever is required My air locker has had all new bearings and seals and done very little kms i need to upgrade to a rear air locker so i can fit my cr-mo front axles and c.v.'s |
|
| Author: | hutch [ Fri Apr 23, 2010 11:50 pm ] |
| Post subject: | Re: swap a good rear air locker for a front air locker |
oozuk wrote: i want to swap my front ARB air locker for a rear ARB air locker
my locker has 4.6 gears fitted but i can change that whatever is required My air locker has had all new bearings and seals and done very little kms i need to upgrade to a rear air locker so i can fit my cr-mo front axles and c.v.'s Talk to ARB, pretty sure the front locker can be used. U just need the 26 spline gears from ARB to turn your 22 spline one into a rear one. |
|
| Author: | zuki [ Fri Apr 23, 2010 11:56 pm ] |
| Post subject: | Re: swap a good rear air locker for a front air locker |
hutch wrote: oozuk wrote: i want to swap my front ARB air locker for a rear ARB air locker my locker has 4.6 gears fitted but i can change that whatever is required My air locker has had all new bearings and seals and done very little kms i need to upgrade to a rear air locker so i can fit my cr-mo front axles and c.v.'s Talk to ARB, pretty sure the front locker can be used. U just need the 26 spline gears from ARB to turn your 22 spline one into a rear one. Hutch, I think he knows that, the problem is there is a considerable wait (like a couple of mths maybe 3) That is why I am guessing! Cheers David |
|
| Author: | oozuk [ Sun Apr 25, 2010 3:36 am ] |
| Post subject: | Re: swap a good rear air locker for a front air locker |
Yeah I'm aware of that. There is a wait ATM and a considerable cost also. You can't buy just the side gears, you have to buy the whole plantery gear set at a cost of $320. So I was putting this question out there as an altenative in the meantime |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|