auszookers.com
http://auszookers.com/forum/

1ltr transfer case
http://auszookers.com/forum/viewtopic.php?f=8&t=11720		 Page 1 of 1
Author:  Verm1n [ Mon May 10, 2010 7:03 am ]
Post subject:  1ltr transfer case
chasing a 1ltr tranny case in bris area
cheers
Author:  Verm1n [ Mon May 10, 2010 7:05 am ]
Post subject:  Re: 1ltr transfer case
with or without switch doesn't matter
Author:  Rusho [ Mon May 10, 2010 7:38 am ]
Post subject:  Re: 1ltr transfer case
I thouht the ones without a switch are worthless?? Toddyboy was selling one a little while back.
Author:  want33s [ Mon May 10, 2010 7:43 am ]
Post subject:  Re: 1ltr transfer case
Rusho81 wrote:
Toddyboy was selling one a little while back.

:wink: :D
Author:  flaxton123 [ Mon May 10, 2010 7:54 am ]
Post subject:  Re: 1ltr transfer case
yeah i think the ones with out the switch have different spines on the shafts so u cant change the flanges and run diferent drive shafts but i could b wrong
Author:  Fatzook [ Mon May 10, 2010 8:04 am ]
Post subject:  Re: 1ltr transfer case
flaxton123 wrote:
yeah i think the ones with out the switch have different spines on the shafts so u cant change the flanges and run diferent drive shafts but i could b wrong


You are corretc. They actually have smaller shafts, and splines, so you cannot do anything with them except bolt them into a 1 litre sierra.
Author:  Bruce [ Mon May 10, 2010 8:17 am ]
Post subject:  Re: 1ltr transfer case
Fatzook wrote:
flaxton123 wrote:
yeah i think the ones with out the switch have different spines on the shafts so u cant change the flanges and run diferent drive shafts but i could b wrong


You are corretc. They actually have smaller shafts, and splines, so you cannot do anything with them except bolt them into a 1 litre sierra.


SO what u are saying Peter is a 1lt without a switch will not fit a 1.3lt with NT flanges?
Author:  steak_knife [ Mon May 10, 2010 8:22 am ]
Post subject:  Re: 1ltr transfer case
Bruce wrote:
Fatzook wrote:
flaxton123 wrote:
yeah i think the ones with out the switch have different spines on the shafts so u cant change the flanges and run diferent drive shafts but i could b wrong


You are corretc. They actually have smaller shafts, and splines, so you cannot do anything with them except bolt them into a 1 litre sierra.


SO what u are saying Peter is a 1lt without a switch will not fit a 1.3lt with NT flanges?


I'll go to the shed & find out.. :P
Author:  steak_knife [ Mon May 10, 2010 8:29 am ]
Post subject:  Re: 1ltr transfer case
steknig wrote:
Bruce wrote:
Fatzook wrote:
flaxton123 wrote:
yeah i think the ones with out the switch have different spines on the shafts so u cant change the flanges and run diferent drive shafts but i could b wrong


You are corretc. They actually have smaller shafts, and splines, so you cannot do anything with them except bolt them into a 1 litre sierra.


SO what u are saying Peter is a 1lt without a switch will not fit a 1.3lt with NT flanges?


I'll go to the shed & find out.. :P


5 min's with a drill & thay would bolt straight on, the 1lt is just a lil bit smaller but by bugger all. :P
Author:  Bruce [ Mon May 10, 2010 8:30 am ]
Post subject:  Re: 1ltr transfer case
steknig wrote:
Bruce wrote:
Fatzook wrote:
flaxton123 wrote:
yeah i think the ones with out the switch have different spines on the shafts so u cant change the flanges and run diferent drive shafts but i could b wrong


You are corretc. They actually have smaller shafts, and splines, so you cannot do anything with them except bolt them into a 1 litre sierra.


SO what u are saying Peter is a 1lt without a switch will not fit a 1.3lt with NT flanges?


I'll go to the shed & find out.. :P


Thanks mate. It's just I got a 1lt T/case here that I got real cheap (It has no 4wd switch) and I was going to put it into my stocka 85 NT 1.3lt 5 speed.
I can't see why it won't work?
Author:  steak_knife [ Mon May 10, 2010 8:33 am ]
Post subject:  Re: 1ltr transfer case
Bruce wrote:

Thanks mate. It's just I got a 1lt T/case here that I got real cheap (It has no 4wd switch) and I was going to put it into my stocka 85 NT 1.3lt 5 speed.



Me to!!! :P
Author:  jonno_racing [ Mon May 10, 2010 10:57 am ]
Post subject:  Re: 1ltr transfer case
Fatzook wrote:
flaxton123 wrote:
yeah i think the ones with out the switch have different spines on the shafts so u cant change the flanges and run diferent drive shafts but i could b wrong


You are corretc. They actually have smaller shafts, and splines, so you cannot do anything with them except bolt them into a 1 litre sierra.


hmm

i am running one atm..

custom flanges that were bought from somewhere at some stage.. wt pattern.
Author:  Verm1n [ Tue May 11, 2010 6:26 am ]
Post subject:  Re: 1ltr transfer case
thanks guys for all the help :) p.m'd a few guys soo fingers crossed :)
if anyone else has/finds/knows anyone who has one post it n it would be muchly appreciated
cheers
Author:  Highway-Star [ Tue May 11, 2010 6:48 am ]
Post subject:  Re: 1ltr transfer case
Verm1n wrote:
thanks guys for all the help :) p.m'd a few guys soo fingers crossed :)
if anyone else has/finds/knows anyone who has one post it n it would be muchly appreciated
cheers



I think I know someone who has one :) (non-4wd light).
Will phone or email you if they do :D
Author:  5ierra [ Wed May 12, 2010 9:45 am ]
Post subject:  Re: 1ltr transfer case
http://cgi.ebay.com.au/Suzuki-Sierra-1L ... 1c126aaa84
Author:  Verm1n [ Wed May 12, 2010 10:10 am ]
Post subject:  Re: 1ltr transfer case
thanks Aaron :) mite be pickin up a 1ltr wit lights tomoz if i get a txt
bahaha.. i was watchin that one on ebay :) thanks 5ierra
Author:  Highway-Star [ Wed May 12, 2010 10:19 am ]
Post subject:  Re: 1ltr transfer case
Verm1n wrote:
thanks Aaron :) mite be pickin up a 1ltr wit lights tomoz if i get a txt
bahaha.. i was watchin that one on ebay :) thanks 5ierra



cool. sent you an email anyway :wink:
Author:  Built4thrashing [ Wed May 12, 2010 10:35 am ]
Post subject:  Re: 1ltr transfer case
i ran a 1ltr case in my WT sierra for about 2 years. and it didnt have the 4x4 switch. all i did was put 1ltr ends on the WT shafts. Its a little bit harder to fit but still fits.

B4T
Author:  Verm1n [ Fri May 14, 2010 10:11 am ]
Post subject:  Re: 1ltr transfer case
thanks all..
didn't end up getting one yet...
STILL AFTER ONE WITH A SWITCH NOW....
as i repaired/fixed my old one :)
... grims alive and better than eva
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/