| auszookers.com http://auszookers.com/forum/ |
|
| brake hoses http://auszookers.com/forum/viewtopic.php?f=8&t=12441 |
Page 1 of 1 |
| Author: | ando_zook94 [ Fri Jun 04, 2010 3:19 am ] |
| Post subject: | brake hoses |
lifted my sierra sj70 and now the hoses will be to short for 4wdin. soo need longer |
|
| Author: | BUZOOKA [ Fri Jun 04, 2010 3:58 am ] |
| Post subject: | Re: brake hoses |
i think its off the early modle swifts they r 4 inces longer standard sierras well thats wat ive heard someone else may be able to shed more light on it |
|
| Author: | Scrawny [ Fri Jun 04, 2010 5:57 am ] |
| Post subject: | Re: brake hoses |
There is a a place out Bayside that makes them, I've heard they are the only ones that will make brake hoses. |
|
| Author: | steak_knife [ Fri Jun 04, 2010 6:21 am ] |
| Post subject: | Re: brake hoses |
ScrawnC wrote: There is a a place out Bayside that makes them, I've heard they are the only ones that will make brake hoses.
Bhss make em to, including s/steel braided. |
|
| Author: | Built4thrashing [ Fri Jun 04, 2010 8:40 am ] |
| Post subject: | Re: brake hoses |
dont buy second hand ones. your saftey and others depend on them working properly so just buy new ones or get them made to suit. Wreckers are not even suposed to sell them.. Its against the law. B4T |
|
| Author: | Choppy [ Fri Jun 04, 2010 8:53 am ] |
| Post subject: | Re: brake hoses |
ive been told enzed can make them up whilst you wait. |
|
| Author: | steak_knife [ Fri Jun 04, 2010 8:55 am ] |
| Post subject: | Re: brake hoses |
Choppy wrote: ive been told enzed can make them up whilst you wait.
I asked the other day & got a NO! & he's an ole mate to. |
|
| Author: | mrw82 [ Fri Jun 04, 2010 9:08 am ] |
| Post subject: | Re: brake hoses |
enzed can do speedflow hoses but they are not DOT approved and cannot be used on any road registered vehicle. caboolture exhaust and mechanical on beerburrum rd caboolture makes them. so does the aussie brakes service place on gympie rd lawnton. |
|
| Author: | Scrawny [ Fri Jun 04, 2010 9:31 am ] |
| Post subject: | Re: brake hoses |
mrw82 wrote: caboolture exhaust and mechanical on beerburrum rd caboolture makes them. so does the aussie brakes service place on gympie rd lawnton.
Good to know, I need some made up that way |
|
| Author: | royce [ Fri Jun 04, 2010 9:41 am ] |
| Post subject: | Re: brake hoses |
the mobile bloke in Brissy will make em too, I assume checkpoint will as well |
|
| Author: | zuki [ Fri Jun 04, 2010 11:12 am ] |
| Post subject: | Re: brake hoses |
ando_zook94 wrote: lifted my sierra sj70 and now the hoses will be to short for 4wdin. soo need longer
I think you have PM |
|
| Author: | want33s [ Fri Jun 04, 2010 9:29 pm ] |
| Post subject: | Re: brake hoses |
steknig wrote: Choppy wrote: ive been told enzed can make them up whilst you wait. I asked the other day & got a NO! & he's an ole mate to. I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!! Your 'mate' doesn't like you. |
|
| Author: | steak_knife [ Fri Jun 04, 2010 9:30 pm ] |
| Post subject: | Re: brake hoses |
want33s wrote: steknig wrote: Choppy wrote: ive been told enzed can make them up whilst you wait. I asked the other day & got a NO! & he's an ole mate to. I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!! Your 'mate' doesn't like you. Yer I get alot of that..  
|
|
| Author: | usher44 [ Fri Jun 04, 2010 10:21 pm ] |
| Post subject: | Re: brake hoses |
want33s wrote: steknig wrote: Choppy wrote: ive been told enzed can make them up whilst you wait. I asked the other day & got a NO! & he's an ole mate to. I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!! Your 'mate' doesn't like you. yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way. |
|
| Author: | Jccck [ Sat Jun 05, 2010 1:10 am ] |
| Post subject: | Re: brake hoses |
90 to 93 Honda Accord Same connections, 6" longer |
|
| Author: | BlueSuzy [ Sat Jun 05, 2010 8:06 am ] |
| Post subject: | Re: brake hoses |
usher44 wrote: want33s wrote: steknig wrote: Choppy wrote: ive been told enzed can make them up whilst you wait. I asked the other day & got a NO! & he's an ole mate to. I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!! Your 'mate' doesn't like you. yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way. No. Some Enzeds will not do it because of 10k + extra insurance per year. |
|
| Author: | steak_knife [ Sat Jun 05, 2010 8:35 am ] |
| Post subject: | Re: brake hoses |
BlueSuzy wrote: usher44 wrote: want33s wrote: steknig wrote: Choppy wrote: ive been told enzed can make them up whilst you wait. I asked the other day & got a NO! & he's an ole mate to. I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!! Your 'mate' doesn't like you. yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way. No. Some Enzeds will not do it because of 10k + extra insurance per year.  See!!!
|
|
| Author: | royce [ Sat Jun 05, 2010 8:38 am ] |
| Post subject: | Re: brake hoses |
BlueSuzy wrote: usher44 wrote: want33s wrote: steknig wrote: Choppy wrote: ive been told enzed can make them up whilst you wait. I asked the other day & got a NO! & he's an ole mate to. I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!! Your 'mate' doesn't like you. yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way. No. Some Enzeds will not do it because of 10k + extra insurance per year. youd reckon a hose blowing on some large machinery has the possibility to cause a much larger liability bill than a bake hose going on a car that has an immediate failsafe and warning system built in |
|
| Author: | BlueSuzy [ Sat Jun 05, 2010 10:49 am ] |
| Post subject: | Re: brake hoses |
royce wrote: BlueSuzy wrote: usher44 wrote: want33s wrote: steknig wrote: Choppy wrote: ive been told enzed can make them up whilst you wait. I asked the other day & got a NO! & he's an ole mate to. I've had a few made by Enzed at Nambour... Legal Aust standards approved ones !!! Your 'mate' doesn't like you. yeah all mine have been made by enzed on the spot, you must be rubbing him the wrong way. No. Some Enzeds will not do it because of 10k + extra insurance per year. youd reckon a hose blowing on some large machinery has the possibility to cause a much larger liability bill than a bake hose going on a car that has an immediate failsafe and warning system built in Sometimes. My hyd hoses just seperate layers or leak over time, and fittings leak. From what i have seen. Onroad must be a higher Liability. |
|
| Author: | 2stroker [ Sat Jun 05, 2010 12:07 pm ] |
| Post subject: | Re: brake hoses |
I have replaced brake lines that I thought looked dodgy, and I had an old Nissan that had a brake line weep causing the pedal to sink when you held the brake on. But has anyone actually had a brake line completely rupture when they put their foot hard on the brakes. |
|
| Author: | Zook_Fan [ Sat Jun 05, 2010 12:14 pm ] |
| Post subject: | Re: brake hoses |
I have but it was a faulty metal line. it was rubbing through because of contact with the steering shaft, i hit the brakes hard and it ruptured |
|
| Author: | BlueSuzy [ Sat Jun 05, 2010 12:44 pm ] |
| Post subject: | Re: brake hoses |
Biggest brake failure i had was a pad jumped out.. 
But your better to buy new, They are cheap. Any brake place should be able to do them, and some hydraulic hose places. |
|
| Author: | eldo [ Sat Jun 05, 2010 8:41 pm ] |
| Post subject: | Re: brake hoses |
Stekky if you rub me the right way I will be your friend!!! |
|
| Author: | steak_knife [ Sat Jun 05, 2010 9:47 pm ] |
| Post subject: | Re: brake hoses |
eldo wrote: Stekky if you rub me the right way I will be your friend!!!
Is this more facebook talk??  
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|