You could of got another 9 month's out of it, still had 3 piston's.. 
| auszookers.com http://auszookers.com/forum/ |
|
| Piston and rings for G13BA http://auszookers.com/forum/viewtopic.php?f=8&t=16663 |
Page 1 of 1 |
| Author: | junek [ Wed Nov 10, 2010 8:53 pm ] |
| Post subject: | Piston and rings for G13BA |
Hi Seems I can only buy a set of pistons...But I only need one. So I am looking for a single piston to fit the G13BA 1298cc engine. Rings to go with it too (number 3 piston if that makes any difference.) Maybe you have a good condition 2nd hand one or a left over one from a set? I am in Sydney, but will pay postage if you are not. Thanks Jamie |
|
| Author: | FullyZooked [ Wed Nov 10, 2010 9:58 pm ] |
| Post subject: | Re: Piston and rings for G13BA |
If you are replacing one piston I would replace them all with new rings and a hone. She'll be like new. Why only one? |
|
| Author: | Kermy87 [ Wed Nov 10, 2010 10:04 pm ] |
| Post subject: | Re: Piston and rings for G13BA |
Tight arse,,,,,, nah just kiddin |
|
| Author: | JrZook [ Wed Nov 10, 2010 10:50 pm ] |
| Post subject: | Re: Piston and rings for G13BA |
FullyZooked wrote: If you are replacing one piston I would replace them all with new rings and a hone. She'll be like new.
Why only one? Yea mate seriously while its apart get a set of std pistons and rings if the bore is still ok and has no lip. Do a quick hone, smash them in and she'll be sweet! |
|
| Author: | Kermy87 [ Wed Nov 10, 2010 10:53 pm ] |
| Post subject: | Re: Piston and rings for G13BA |
Him pretty sure he's only Gunna just get his truck goin nd sell it |
|
| Author: | FullyZooked [ Thu Nov 11, 2010 12:09 am ] |
| Post subject: | Re: Piston and rings for G13BA |
Kermy87 wrote: Him pretty sure he's only Gunna just get his truck goin nd sell it
Fark, I baggz not buying it! LMAO |
|
| Author: | junek [ Thu Nov 11, 2010 1:59 am ] |
| Post subject: | Re: Piston and rings for G13BA |
Haha. Ok, I had no idea it was standard practice to replace all 4 at once. I fugured a 2nd hand one would not be a problem. Wrong obviously! I will get a full set and rings in there. Not honing it but...its just a suzuki!! haha thanks and yes...i am a tight arse. Why would u noit want to buy it...It ran for a month with only 3 and a half pistons! Obviously bulletproof. |
|
| Author: | steak_knife [ Thu Nov 11, 2010 5:25 am ] |
| Post subject: | Re: Piston and rings for G13BA |
| You could of got another 9 month's out of it, still had 3 piston's..
|
|
| Author: | thetassieboys [ Sun Nov 14, 2010 8:42 pm ] |
| Post subject: | Re: Piston and rings for G13BA |
did no. 3 piston shatter?? coz i have a 97 sierra and i drove 2000 k's with a shatterd piston (no.3) without even knowing they are bullet proof.. i did get a set of 4 brand new pistons and ran the boreing machine thru it and not its good as gold |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|