auszookers.com
http://auszookers.com/forum/

LJ80 rear drums brake bits
http://auszookers.com/forum/viewtopic.php?f=8&t=16989		 Page 1 of 2
Author:  Kymb0 [ Tue Nov 23, 2010 6:00 am ]
Post subject:  LJ80 rear drums brake bits
Hi again, now Im paying the price for dragging a project out for way too long. The components from my LJ80 rear brake drums are missing.

I thought they where in there but alas they are gone.

At this rate I may have to buy another doner LJ
Author:  christover1 [ Tue Nov 23, 2010 7:11 am ]
Post subject:  Re: LJ80 rear drums brake bits
It is quite possible that 1.0 litre Sierra bits could be the same.
Worth looking into.
Author:  tanshi [ Tue Nov 23, 2010 7:13 am ]
Post subject:  Re: LJ80 rear drums brake bits
you could upgrade to sierra drums with adjusters pretty easy. highway star has done this
Author:  tanshi [ Tue Nov 23, 2010 7:14 am ]
Post subject:  Re: LJ80 rear drums brake bits
oh i also have some bits and pieces too, what bits are you after kimbo?
Author:  Kymb0 [ Tue Nov 23, 2010 7:19 am ]
Post subject:  Re: LJ80 rear drums brake bits
Heh Tanshi, I'll check
Author:  christover1 [ Tue Nov 23, 2010 7:23 am ]
Post subject:  Re: LJ80 rear drums brake bits
Checked my pile of bits, I don't have anything useful sorry.
Author:  Highway-Star [ Tue Nov 23, 2010 8:50 am ]
Post subject:  Re: LJ80 rear drums brake bits
I should have the original rear drums from my LJ81 when I did this:
(the rear diff part half way down, not the swivel bit obviously).

http://www.auszookers.com/index.php?nam ... ic&t=10969



Not sure what state they are in, but could check tomorrow. Alternately you could do what I did and fit 1.3 self adjusters. Or SJ410 rear drums should bolt straight up as a complete unit (though different to the Stockman drums).
Author:  2stroker [ Tue Nov 23, 2010 11:40 am ]
Post subject:  Re: LJ80 rear drums brake bits
Kymbo I will be wrecking one in a week or two and will have lots of bits it is a complete car just have to trailer it home.
Author:  Kymb0 [ Tue Nov 23, 2010 8:07 pm ]
Post subject:  Re: LJ80 rear drums brake bits
What good timing 2stroker
Author:  Kymb0 [ Wed Nov 24, 2010 6:10 am ]
Post subject:  Re: LJ80 rear drums brake bits
Kymb0 wrote:
What good timing 2stroker
Hi again Peops, here's the drum.

I need to get a left and right rear axles from a 1 litre.

I AM DESPERATE. I really want to get this project going again. I can pick up anywhere around Brissy and am hoping to get them this week. I have cash. Pleeeeease if you can help you will be contributing to rebirth of a beautiful lil LJ

Now I will sit in the shadows and wait
Author:  Fatzook [ Wed Nov 24, 2010 6:13 am ]
Post subject:  Re: LJ80 rear drums brake bits
Kymb0 wrote:
Kymb0 wrote:
What good timing 2stroker
Hi again Peops, here's the drum.

I need to get a left and right rear axles from a 1 litre.

I AM DESPERATE. I really want to get this project going again. I can pick up anywhere around Brissy and am hoping to get them this week. I have cash. Pleeeeease if you can help you will be contributing to rebirth of a beautiful lil LJ

Now I will sit in the shadows and wait


You have no idea how many complete 1 litre diffs I have thrown out at sims over the years :roll: Doesn't help you now though :lol:
Author:  Highway-Star [ Wed Nov 24, 2010 6:22 am ]
Post subject:  Re: LJ80 rear drums brake bits
Kymb0 wrote:
Kymb0 wrote:
What good timing 2stroker
Hi again Peops, here's the drum.

I need to get a left and right rear axles from a 1 litre.

I AM DESPERATE. I really want to get this project going again. I can pick up anywhere around Brissy and am hoping to get them this week. I have cash. Pleeeeease if you can help you will be contributing to rebirth of a beautiful lil LJ

Now I will sit in the shadows and wait



As in axle shafts :? I have so many laying around I could start an axle farm!
if you want brake bits off them, I have some assorted bits in poor to average condition.

PM me if its what you want, I'm home evenings this week, but not Saturday due to work.
Author:  2stroker [ Wed Nov 24, 2010 9:04 am ]
Post subject:  Re: LJ80 rear drums brake bits
Whats going on Kymbo, 1 litre rear axles ?????? I could understand 1 litre fronts for CV's and stubs for a disc brake conversion, but rears have me confused.
Author:  christover1 [ Wed Nov 24, 2010 10:53 am ]
Post subject:  Re: LJ80 rear drums brake bits
I'm happy to post some from Victoria, if You have no luck locally.
Got lots of 1.0 litre stuff left over from Frog.

christover
Author:  Kymb0 [ Wed Nov 24, 2010 6:47 pm ]
Post subject:  Re: LJ80 rear drums brake bits
Want to go the 1 litre rear drums for future availability of parts. The shields and stuff on the car arent much chop. Not actually using the axles, just need the entire drums.

One of the things I love best about the LJ is the central Banjo. It appeals to my sense of balance lol
Author:  Kymb0 [ Thu Nov 25, 2010 10:36 am ]
Post subject:  Re: LJ80 rear drums brake bits
Big thanks to Highway-Star, 1litre brakes acquired
Author:  Kymb0 [ Fri Dec 03, 2010 11:31 pm ]
Post subject:  Re: LJ80 rear drums brake bits
Fail again. Would appear my rear axle is off the lj50 variety making it incompatable with the 1 litre drums. Ive been trying to contact 2 stroker but if anyone has a complete LJ80 rear axle I would be very interested.

The suzuki gods are working against me, please help
Author:  3cyl [ Sat Dec 04, 2010 10:48 pm ]
Post subject:  Re: LJ80 rear drums brake bits
You want Stockman LJ80, with the grille like Highway star's, that's where most of the good driveline bits get robbed from.
Author:  Kymb0 [ Sun Dec 05, 2010 1:43 am ]
Post subject:  Re: LJ80 rear drums brake bits
3cyl wrote:
You want Stockman LJ80, with the grille like Highway star's, that's where most of the good driveline bits get robbed from.


Yeah, thats what I need. Any ideas?
Author:  Kymb0 [ Tue Dec 07, 2010 7:51 am ]
Post subject:  Re: LJ80 rear drums brake bits
Still floundering. Heeeelp
Author:  christover1 [ Tue Dec 07, 2010 8:11 am ]
Post subject:  Re: LJ80 rear drums brake bits
I've had success hunting down parts using on line parts locators.
There's lots of them, but I've had luck with these sites.
christover

http://www.1300wrecker.com.au/Online.aspx

http://www.findapart.com.au/suzuki_parts.php

http://www.suzukiwreckers.com.au/

http://www.eautoparts.com.au/partsreqlist.aspx

http://www.gympiewreckers.com.au/partlocator.php

http://www.autoparts.com.au/
Author:  TZAR [ Sun Dec 12, 2010 7:38 am ]
Post subject:  Re: LJ80 rear drums brake bits
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... SS:AU:1123

brand new rear wheel cylinders for $54 a pair :-)
Author:  Kymb0 [ Mon Dec 13, 2010 6:46 pm ]
Post subject:  Re: LJ80 rear drums brake bits
TZAR wrote:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=120659108036&ssPageName=ADME:B:SS:AU:1123

brand new rear wheel cylinders for $54 a pair :-)

Thanks Jock, what do you think about my dilema. Should I just find the LJ50 drum brake components and be done with it. I thing Highway Star said he might be able to dig them up. The front brakes have the disc conversion and there is a brake booster fitted.

There doesnt seem to be any holes in the shield at the back of the drums so I guess all the componants float around inside the drum. What parts are there? An adjuster, retaining springs, the brake cylinder and 2 shoes?
Author:  Highway-Star [ Mon Dec 13, 2010 8:57 pm ]
Post subject:  Re: LJ80 rear drums brake bits
Kymb0 wrote:
TZAR wrote:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=120659108036&ssPageName=ADME:B:SS:AU:1123

brand new rear wheel cylinders for $54 a pair :-)

Thanks Jock, what do you think about my dilema. Should I just find the LJ50 drum brake components and be done with it. I thing Highway Star said he might be able to dig them up. The front brakes have the disc conversion and there is a brake booster fitted.

There doesnt seem to be any holes in the shield at the back of the drums so I guess all the componants float around inside the drum. What parts are there? An adjuster, retaining springs, the brake cylinder and 2 shoes?



Yeah thats all there is in the early brakes. The stockmans were the first model to introduce pined shoes.
Author:  Kymb0 [ Mon Dec 13, 2010 10:02 pm ]
Post subject:  Re: LJ80 rear drums brake bits
Highway-Star wrote:
Kymb0 wrote:
TZAR wrote:
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=120659108036&ssPageName=ADME:B:SS:AU:1123

brand new rear wheel cylinders for $54 a pair :-)

Thanks Jock, what do you think about my dilema. Should I just find the LJ50 drum brake components and be done with it. I thing Highway Star said he might be able to dig them up. The front brakes have the disc conversion and there is a brake booster fitted.

There doesnt seem to be any holes in the shield at the back of the drums so I guess all the componants float around inside the drum. What parts are there? An adjuster, retaining springs, the brake cylinder and 2 shoes?



Yeah thats all there is in the early brakes. The stockmans were the first model to introduce pined shoes.

Any chance of you taking a look for me Aaron for the bits? I can get the wheel cylinders by the look of it.
Author:  2stroker [ Tue Dec 14, 2010 1:08 am ]
Post subject:  Re: LJ80 rear drums brake bits
Sorry kymbo, I havn't forgotten you, my yard is just to wet to tow the trailer in at the moment I will get that wreck home as soon as my yard dries out and then I will have a stockman rear drum to drum for you.
Author:  Kymb0 [ Tue Dec 14, 2010 3:59 am ]
Post subject:  Re: LJ80 rear drums brake bits
2stroker wrote:
Sorry kymbo, I havn't forgotten you, my yard is just to wet to tow the trailer in at the moment I will get that wreck home as soon as my yard dries out and then I will have a stockman rear drum to drum for you.

Woo Hoo
Thanks mate
Author:  Highway-Star [ Tue Dec 14, 2010 6:01 am ]
Post subject:  Re: LJ80 rear drums brake bits
2stroker wrote:
Sorry kymbo, I havn't forgotten you, my yard is just to wet to tow the trailer in at the moment I will get that wreck home as soon as my yard dries out and then I will have a stockman rear drum to drum for you.



Thats the best option! :D
Author:  2stroker [ Tue Dec 14, 2010 11:08 pm ]
Post subject:  Re: LJ80 rear drums brake bits
I bought this one to wreck out so all you LJ people get your wish list ready, complete car with lots of good bits.

Will have another in the new year with an excellent fibre glass front clip and bonnet.
Author:  tanshi [ Tue Dec 14, 2010 11:16 pm ]
Post subject:  Re: LJ80 rear drums brake bits
So it has a stockman Grill?
soft top or hard top?
if its a soft top how much for the tub? condition?
Page 1 of 2 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/