| auszookers.com http://auszookers.com/forum/ |
|
| 26 spline Vitara diff http://auszookers.com/forum/viewtopic.php?f=8&t=17158 |
Page 1 of 1 |
| Author: | coneykid [ Tue Nov 30, 2010 6:38 am ] |
| Post subject: | 26 spline Vitara diff |
I wanna put 5.12 diffs in my Sierra. I have a 91 model front. 22 spline. Thanks to dezook. I just need a 26 spline. any one able to help |
|
| Author: | usher44 [ Tue Nov 30, 2010 7:33 pm ] |
| Post subject: | Re: 26 spline Vitara diff |
what are the 512 26 splines out of? there is a vitara out at high way wreckers with both diffs. |
|
| Author: | coneykid [ Wed Dec 01, 2010 2:36 am ] |
| Post subject: | Re: 26 spline Vitara diff |
They want 450 each. They fags |
|
| Author: | tanshi [ Wed Dec 01, 2010 2:44 am ] |
| Post subject: | Re: 26 spline Vitara diff |
so your putting alloy diffs in a sierra? |
|
| Author: | coneykid [ Wed Dec 01, 2010 3:45 am ] |
| Post subject: | Re: 26 spline Vitara diff |
No. I'll use my houseing. |
|
| Author: | tanshi [ Wed Dec 01, 2010 3:52 am ] |
| Post subject: | Re: 26 spline Vitara diff |
you can use the sierra rear 26 spline carrier then not sure why you would need a vitara one |
|
| Author: | coneykid [ Wed Dec 01, 2010 4:13 am ] |
| Post subject: | Re: 26 spline Vitara diff |
tanshi wrote: you can use the sierra rear 26 spline carrier then
not sure why you would need a vitara one what do you mean tanshi?? Wouldnt i need the main drive gear and outside gear from the vitara to get 5.12 reduction??? |
|
| Author: | coneykid [ Wed Dec 01, 2010 4:16 am ] |
| Post subject: | Re: 26 spline Vitara diff |
the vitara rear centre wont you can get the front 26 spline diff from a vitara from about 92 on and put that in the rear of a sierra but tis an alloy housing so wont lst very long I am not sure if you can take the 22 spline front diff from an 88-92 vitara and fit that to the front of a sierra, but once again its alloy so not strong at all you can swap the gears themself in to a sierra centre though That was posted in another thread i read. Then want33 told me i can use my old spline carrier if i find a 22 spline vitara. |
|
| Author: | tanshi [ Wed Dec 01, 2010 5:06 am ] |
| Post subject: | Re: 26 spline Vitara diff |
what im saying is that you can use the sierra housing and centres both front and rear and just use the gears from the vitara diffs. that way you only need to get 5.12 gears and not have to chase down a vitara 26 spline centre. |
|
| Author: | coneykid [ Wed Dec 01, 2010 5:16 am ] |
| Post subject: | Re: 26 spline Vitara diff |
Yeah, sorry. Sweet. Any one have any Vitara crown wall and pinion |
|
| Author: | tanshi [ Wed Dec 01, 2010 5:18 am ] |
| Post subject: | Re: 26 spline Vitara diff |
i can possibly get a 5.12 ring and pinion for ya. how much you looking at spending? |
|
| Author: | coneykid [ Wed Dec 01, 2010 7:14 am ] |
| Post subject: | Re: 26 spline Vitara diff |
How much.?? |
|
| Author: | coneykid [ Mon Dec 06, 2010 5:10 am ] |
| Post subject: | Re: 26 spline Vitara diff |
Bump.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|