auszookers.com
http://auszookers.com/forum/

M12 x 1.5 wheel nuts
http://auszookers.com/forum/viewtopic.php?f=8&t=17187
Page 1 of 1

Author:  Bruce [ Wed Dec 01, 2010 7:06 am ]
Post subject:  M12 x 1.5 wheel nuts

Ok just throwing it out there before I go to wreckers and pay money.
Yep I'm chasing free nuts. :mrgreen:
I'm chasing 16 of them. For our old Lancer.
I have taken off the mag wheels and have got stock wheels on it again.
Yes I know I can get them from Repco or wreckers ETC. But that cost $$$
Will be selling the old Lancer so really don't want to spend anymore than I have too.
And before anyone asks, no zooks won't fit they are 1.25.
So if you can help please let me know.

Author:  bohuler [ Wed Dec 01, 2010 7:34 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Go to a pick a part wreckers and wear a coat with big deeeeep pockets, then you get your nuts for free :D

Author:  Bruce [ Wed Dec 01, 2010 7:40 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Don't worry, thought of that but would not sleep at night :wink:

Author:  303zuke [ Wed Dec 01, 2010 7:45 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

If your trying to save money, try a few wreckers and only ask for 4 at a time, on the bludge. Often they will charge for a full set, but just a couple: "Meh, take 'em"

M12x1.5 are also on Mazdas and Toyotas, but beware of hex sizes. Some are 19mm, others are 21mm, and having a mixed set of sizes on the car will be a PITA.

Author:  Bruce [ Wed Dec 01, 2010 7:48 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Thanks 303. Don't really care if they are 19mm or 21 or both. Just want to take the mag nuts off the lancer with stock rims and put normal nuts on them so I can sell the car. :-) Cause the mag wheels are worth more than the old lancer is now worth.
Yep I'm being a tight arse for a change. :-)

Author:  Fatzook [ Wed Dec 01, 2010 8:08 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Bruce I sold a box of 120 of that size wheel nut, brand new chromies for $10 on ebay 2 months ago :P :roll:

Author:  Bruce [ Wed Dec 01, 2010 8:14 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

And I bet you got none laying around :-(

Author:  Fatzook [ Wed Dec 01, 2010 8:17 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Bruce wrote:
And I bet you got none laying around :-(


Negative :?

I'll have a look in the morning though. If I find any I'll text you. :wink:

Author:  Bruce [ Wed Dec 01, 2010 8:20 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Thanks mate.

Author:  steak_knife [ Wed Dec 01, 2010 9:18 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Can I look nut's to?? :P

For nut's?? :P

To?? :P

:P

Author:  royce [ Wed Dec 01, 2010 10:03 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

passenger side of old mazda vans have what you need

or early 626's :wink:

Author:  boost=money [ Wed Dec 01, 2010 10:10 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

just order some from any tire shop we sell them for $1.20 each

Author:  steak_knife [ Wed Dec 01, 2010 10:12 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

royce wrote:
passenger side of old mazda vans have what you need

or early 626's :wink:


:? left hand thread?? :lol:

Author:  Bruce [ Wed Dec 01, 2010 9:54 pm ]
Post subject:  Re: M12 x 1.5 wheel nuts

Ok Looks like I have some. (not got yet but the guy seems trustworthy :-) )

Thanks mate.

Author:  Scrawny [ Thu Dec 02, 2010 4:51 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Bruce wrote:
Ok Looks like I have some. (not got yet but the guy seems trustworthy :-) )

Thanks mate.


Can't be me then :roll: :lol:

Author:  steak_knife [ Thu Dec 02, 2010 5:47 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

ScrawnC wrote:
Bruce wrote:
Ok Looks like I have some. (not got yet but the guy seems trustworthy :-) )

Thanks mate.


Can't be me then :roll: :lol:


:roll:

Author:  Bruce [ Thu Dec 02, 2010 6:10 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Yes Stekky he seems ok this guy. Spoke to him today and he was going to ship them too me via Snail mail.
I'll let you know if I get them. :-)
But payback will be a bitch if they ever want stuff from me again if they don't arrive. :-)
bwhahahahaahha

Author:  steak_knife [ Thu Dec 02, 2010 6:13 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Snail trail mail still work's, it's not like they could be faxed to you... :roll:

Author:  Bruce [ Thu Dec 02, 2010 6:16 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

Why not? Get with the times old fella.

Author:  steak_knife [ Thu Dec 02, 2010 6:17 am ]
Post subject:  Re: M12 x 1.5 wheel nuts

8O

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/