| auszookers.com http://auszookers.com/forum/ |
|
| LJ50 parts http://auszookers.com/forum/viewtopic.php?f=8&t=21383 |
Page 1 of 1 |
| Author: | tonyevans [ Wed Apr 27, 2011 3:55 am ] |
| Post subject: | LJ50 parts |
Any parts for a LJ50 tintop would be of interest especially 3cyl 2 stroke motor parts such as a Carbie and an exhaust manifold or even compleate motor dead or alive - Tony |
|
| Author: | tonyevans [ Sat Apr 30, 2011 4:56 am ] |
| Post subject: | Re: LJ50 parts |
Bump |
|
| Author: | 3cyl [ Wed May 04, 2011 10:13 am ] |
| Post subject: | Re: LJ50 parts |
These are the rear doors I have, none are perfect. The orange one is from a 77 LJ50 and has 2 small dents but original paint, missing glass though. White one is straight but some welds on inside. Yellow one is straightest but some surface rust on inside (that's just mud on it from the flood). |
|
| Author: | Verm1n [ Wed May 04, 2011 10:18 am ] |
| Post subject: | Re: LJ50 parts |
You parting out the 50 body 3cyl?? |
|
| Author: | 3cyl [ Wed May 04, 2011 10:23 am ] |
| Post subject: | Re: LJ50 parts |
Nah that's me wheelshed. Tony was lookin for a rear door is all, rather keep the white one intact, probably never use it though. Definitely never use 3 rear HT doors. |
|
| Author: | 303zuke [ Wed May 04, 2011 10:27 am ] |
| Post subject: | Re: LJ50 parts |
In This thread I mentioned the 2 types of door handles for the rear door. The white door was LJ50 only, while the orange and yellow ones were both 50 and 80. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|