auszookers.com :: View topic - lookin 4 some 1 that will do spring ova for my sierra

If you cant afford to buy a full keyboard you may not be able to afford to do a spring over :lol:

lookin 4 some 1 that will do spring ova for my sierra

Joe is the only person I'd consider to do a SPOA

Gwagensteve wrote:

Joe is the only person I'd consider to do a SPOA

Geee when did you guys kiss and make up?

lookin 4 some 1 that will do spring ova for my sierra

I never said a SPOA was a good idea, but getting Joe to do one will at least mean it's a bad idea well built.

Steve.

Only Diff is u almost need to rip your car apart as much as Alien did to do it

TryHard wrote:

Only Diff is u almost need to rip your car apart as much as Alien did to do it properly

Red89 wrote:

If you cant afford to buy a full keyboard you may not be able to afford to do a spring over :lol:

If you look in the Business directory part of this forum you will find BenT's thread, You can purchase spring perch's from him.
I'm sure there are numerous threads on how to do it, off the top of my head, Jimbojones LWB thread show's how he's done it. He's even included pretty pictures. You may see what's involved and at least you will have an idea on what's involved.

buzbox wrote:

Red89 wrote:

If you cant afford to buy a full keyboard you may not be able to afford to do a spring over :lol:

I looked but couldn't see any

Gwagensteve wrote:

TryHard wrote:

Only Diff is u almost need to rip your car apart as much as Alien did to do it properly

the difference with mine was it being engineered, so it had to be done like this... even a factory crossmember needed rewelding cos the factory weld was shoddy - something that wouldnt have been noticed otherwise.

Author:	THEBRUCE [ Tue May 31, 2011 7:48 am ]
Post subject:	lookin 4 some 1 that will do spring ova for my sierra
lookin 4 some 1 that will do spring ova for my sierra PM me

Author:	Red89 [ Tue May 31, 2011 8:10 am ]
Post subject:	Re: spring ova
If you cant afford to buy a full keyboard you may not be able to afford to do a spring over PM JoeBlow, if you are going to pay someone to do it he would be the first place to start.

Author:	buzbox [ Tue May 31, 2011 8:18 am ]
Post subject:	Re: spring ova
Red89 wrote: If you cant afford to buy a full keyboard you may not be able to afford to do a spring over If you look in the Business directory part of this forum you will find BenT's thread, You can purchase spring perch's from him. I'm sure there are numerous threads on how to do it, off the top of my head, Jimbojones LWB thread show's how he's done it. He's even included pretty pictures. You may see what's involved and at least you will have an idea on what's involved.

Author:	ajsr [ Tue May 31, 2011 8:19 am ]
Post subject:	Re: spring ova
THEBRUCE wrote: lookin 4 some 1 that will do spring ova for my sierra X2 on mr jblow if you must do a spoa

Author:	Gwagensteve [ Tue May 31, 2011 8:33 am ]
Post subject:	Re: spring ova
Joe is the only person I'd consider to do a SPOA, but it's expensive, and you really want to know what you are setting out to achieve. Personally, I don't think there's much point - IMHO it's too expensive for the performance it delivers for our terrain. Steve.

auszookers.com http://auszookers.com/forum/

lookin 4 some 1 that will do spring ova for my sierra http://auszookers.com/forum/viewtopic.php?f=8&t=22414	Page 1 of 1

Author:	JrZook [ Tue May 31, 2011 8:38 am ]
Post subject:	Re: spring ova
Gwagensteve wrote: Joe is the only person I'd consider to do a SPOA Geee when did you guys kiss and make up?

Author:	shakes [ Tue May 31, 2011 8:42 am ]
Post subject:	Re: spring ova
Gwagensteve wrote: Joe is the only person I'd consider to do a SPOA buy toiletducks sierra.. be a cheaper way to go

Author:	oozuk [ Tue May 31, 2011 8:58 am ]
Post subject:	Re: spring ova
JrZook wrote: Gwagensteve wrote: Joe is the only person I'd consider to do a SPOA Geee when did you guys kiss and make up?

Author:	jmd-247 [ Tue May 31, 2011 9:02 am ]
Post subject:	Re: spring ova
THEBRUCE wrote: lookin 4 some 1 that will do spring ova for my sierra hey mate, I have/ am installing a spoa set up on my sierra atm (things are never finished ) i asked a few questios on here and realised i had done no where near the amount of reading and research i should have done to justify this lift. As said before, what do you use it for? and is it something you really want to do, because it isnt exactly easily reversed! As long as you have read all the information and realise it all, Low range offroad have a SPOA kit that gives almost everything you need, and add a steering kit to this (tie rods etc) and you wont need a great deal else for the lift, considering everything else on your car is sound.. I guess if you can find a mate or someone with a welder and some idea about how things work you might get someone to do it for a ok price, or the beer economy! just have a look around and read all the info.. good luck!! josh.

Author:	Gwagensteve [ Tue May 31, 2011 9:08 am ]
Post subject:	Re: spring ova
I never said a SPOA was a good idea, but getting Joe to do one will at least mean it's a bad idea well built. Steve.

Author:	joeblow [ Tue May 31, 2011 9:13 am ]
Post subject:	Re: spring ova
Gwagensteve wrote: I never said a SPOA was a good idea, but getting Joe to do one will at least mean it's a bad idea well built. Steve. i'm getting old........... i'll even pay that one. and no......don't pay me to do an expensive SPOA. pay me even more and i will do an awesome coil conversion which funnily enough......is easier to engineer these days.

Author:	alien [ Tue May 31, 2011 9:47 am ]
Post subject:	Re: spring ova
THEBRUCE - if you want an idea of how much work goes into a SPOA conversion check this out: http://www.auszookers.com/index.php?nam ... ic&t=22354

Author:	TryHard [ Tue May 31, 2011 9:53 am ]
Post subject:	Re: spring ova
Only Diff is u dont need to rip your car apart as much as Alien did to do it

Author:	Gwagensteve [ Tue May 31, 2011 10:02 am ]
Post subject:	Re: spring ova
TryHard wrote: Only Diff is u almost need to rip your car apart as much as Alien did to do it

Author:	alien [ Tue May 31, 2011 1:41 pm ]
Post subject:	Re: spring ova
lol i just wanted to do something a little different and have it made legal... something to make the then DPI cringe because it broke all their rules while still saying inside of them... as much as they argued their case, by the letter of the law (and thanks to my engineer for arguing the point) it was road legal and had to be certified =) they've changed the law since then.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/

Author:	alien [ Tue May 31, 2011 10:06 am ]
Post subject:	Re: spring ova
Gwagensteve wrote: TryHard wrote: Only Diff is u almost need to rip your car apart as much as Alien did to do it properly the difference with mine was it being engineered, so it had to be done like this... even a factory crossmember needed rewelding cos the factory weld was shoddy - something that wouldnt have been noticed otherwise.

Author:	stockman [ Tue May 31, 2011 11:34 am ]
Post subject:	Re: spring ova
buzbox wrote: Red89 wrote: If you cant afford to buy a full keyboard you may not be able to afford to do a spring over If you look in the Business directory part of this forum you will find BenT's thread, You can purchase spring perch's from him. I'm sure there are numerous threads on how to do it, off the top of my head, Jimbojones LWB thread show's how he's done it. He's even included pretty pictures. You may see what's involved and at least you will have an idea on what's involved. I looked but couldn't see any

Author:	Fatzook [ Tue May 31, 2011 11:45 am ]
Post subject:	Re: spring ova
stockman wrote: buzbox wrote: Red89 wrote: If you cant afford to buy a full keyboard you may not be able to afford to do a spring over If you look in the Business directory part of this forum you will find BenT's thread, You can purchase spring perch's from him. I'm sure there are numerous threads on how to do it, off the top of my head, Jimbojones LWB thread show's how he's done it. He's even included pretty pictures. You may see what's involved and at least you will have an idea on what's involved. I looked but couldn't see any Yeah me too. But some bloke called Fatzook sells them though

Author:	TryHard [ Tue May 31, 2011 11:55 am ]
Post subject:	Re: spring ova
I Must Stress this even i think about doing SPOA but when u look more into it theres very little benefit from doing it to do it right your looking at 1 k in parts and thats from the usa and thats doing it on the cheap theres alot then need to be taken into Account when doing this do reaseach more and some more and u will find out ur better going coils or something else .. also if this zook is for the road keep it leaf sprung and just flaten the backs make it more flexy ..

Author:	TryHard [ Tue May 31, 2011 12:01 pm ]
Post subject:	Re: spring ova
alien wrote: Gwagensteve wrote: TryHard wrote: Only Diff is u almost need to rip your car apart as much as Alien did to do it properly the difference with mine was it being engineered, so it had to be done like this... even a factory crossmember needed rewelding cos the factory weld was shoddy - something that wouldnt have been noticed otherwise. you just wanted a Excess to rip your zook apart

Author:	SSSIERA [ Tue May 31, 2011 2:44 pm ]
Post subject:	Re: spring ova
your build makes it look easy alien. havent even got one calculation in there hahaha.

Author:	SierraDan [ Tue May 31, 2011 9:27 pm ]
Post subject:	Re: spring ova
Stay low. Cut the guards to bits!

Author:	barneyszookin [ Wed Jun 01, 2011 9:45 am ]
Post subject:	Re: lookin 4 some 1 that will do spring ova for my sierra
I have a complete setup that's under a Sierra that I'm wrecking... If you were interested in it? Pm your number and I can send you some pics if you want.