auszookers.com
http://auszookers.com/forum/

Bits to make NT Drum brakes to disks
http://auszookers.com/forum/viewtopic.php?f=8&t=24541		 Page 1 of 1
Author:  tonyevans [ Fri Aug 05, 2011 6:26 am ]
Post subject:  Bits to make NT Drum brakes to disks
I have Master to extended brake lines I need the rest - Callipers and disks etc.

Tony
Author:  bohuler [ Fri Aug 05, 2011 7:09 am ]
Post subject:  Re: Bits to make NT Drum brakes to disks
I have a set of snake racing bracket things that hold the bearing and the calipers. I will get a pic when i get home (on the net at work, love slacking off at a servo!). $150 posted if your interested.
Author:  bohuler [ Fri Aug 05, 2011 7:13 am ]
Post subject:  Re: Bits to make NT Drum brakes to disks
http://store.snakeracing.com.au/~snaker ... 806cc15326

Thats if you wanted to buy it from them :blink:
Author:  christover1 [ Fri Aug 05, 2011 8:19 am ]
Post subject:  Re: Bits to make NT Drum brakes to disks
I'm assuming he wants to convert front drums to discs, with the knuckles or whatever is needed off disc models.

But I could be wrong
Author:  tonyevans [ Fri Aug 05, 2011 9:37 pm ]
Post subject:  Re: Bits to make NT Drum brakes to disks
christover1 wrote:
I'm assuming he wants to convert front drums to discs, with the knuckles or whatever is needed off disc models.

But I could be wrong


No, as usual chrisover1 you are right on the nail - I have a standard front DRUM brake set-up and wish to make it DISK brakes - I have a booster and master cylinder and brake lines but need the rest.

Tony
Author:  bohuler [ Sat Aug 06, 2011 11:19 pm ]
Post subject:  Re: Bits to make NT Drum brakes to disks
Ahh, i thought you meant a rear brake conversion, my bad :p I think i should go back to school to learn how to read properly :D
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/