| auszookers.com http://auszookers.com/forum/ |
|
| rib style crank pully to suit g13a sierra http://auszookers.com/forum/viewtopic.php?f=8&t=36381 |
Page 1 of 1 |
| Author: | pezz [ Sun Oct 14, 2012 8:20 pm ] |
| Post subject: | rib style crank pully to suit g13a sierra |
hi, im after a double row crank pully(multi rib) to fit to my sierra for my alt and power steering upgrade pm me if you can help me out to suit 4 bolt 1.3 crank Cheers |
|
| Author: | pezz [ Thu Oct 18, 2012 11:05 am ] |
| Post subject: | Re: crank pully to suit g13a sierra |
Bump. |
|
| Author: | russman [ Wed Oct 24, 2012 7:59 am ] |
| Post subject: | Re: crank pully to suit g13a sierra |
I reckon I have one, it's off a G13BA. Not to suit v-belt right? G13a is v-belt. G13BA is ribbed |
|
| Author: | Mitchie.1 [ Wed Oct 24, 2012 7:00 pm ] |
| Post subject: | Re: crank pully to suit g13a sierra |
I've got a trail tough one that is v inside multi rib outside. |
|
| Author: | pezz [ Wed Oct 24, 2012 8:23 pm ] |
| Post subject: | Re: crank pully to suit g13a sierra |
yep, im after a four bolt mount, both sections in multi rib.. not v.. if you have one im keen |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|