| auszookers.com http://auszookers.com/forum/ |
|
| Tow Bar to suit SV420 http://auszookers.com/forum/viewtopic.php?f=8&t=36982 |
Page 1 of 1 |
| Author: | rwicks10 [ Thu Nov 08, 2012 8:45 pm ] |
| Post subject: | Tow Bar to suit SV420 |
Hi there, I am chasing a tow bar to suit an SV420 Vitara if anyone has one that they are happy to sell. Many thanks, rwicks10. |
|
| Author: | atari4x4 [ Thu Nov 08, 2012 8:52 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
i have one that came off my SV620, it's not a receiver hitch type but should bolt straight up as i removed the one from my SV420 & bolted it straight up to the SV620. will dig it out & grab a few pics over the weekend.  not sure what it's worth & i'm guessing freight will be a bit to get it down to south west new zealand |
|
| Author: | Fatzook [ Thu Nov 08, 2012 8:52 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
I've got one that will be available in 2 weeks. Its in good shape. Tounge and ball, NOT hayman reece receiver type. |
|
| Author: | rwicks10 [ Thu Nov 08, 2012 9:07 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
Hi there, many thanks for the responses. I am thinking the freight on ATARI's bar would be a little cheaper, due to the shorter distance. Although if you are both able to pm with your prices that would be grand. Once again I appreciate the prompt responses. Cheers, rwicks10. |
|
| Author: | Fatzook [ Thu Nov 08, 2012 10:26 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
got a postcode we can work with? |
|
| Author: | atari4x4 [ Thu Nov 08, 2012 10:27 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
i was just going to post it to jonno_racing's place... seeing they're all related down there. 
|
|
| Author: | Fatzook [ Thu Nov 08, 2012 10:30 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
LOL. Buy Gus' bar. Its not being used ATM, whereas I will need mine for the next few weeks. |
|
| Author: | atari4x4 [ Sun Nov 11, 2012 12:51 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
i just went to offer up the SV620 towbar to my SV420 & the thing hits the tank before i even get close to lining up the mounting points.     looking at the two of them side by side the location of the tank on the SWB is a fair bit closer to the end of the chassis compared to the LWB. i must have got lucky with my swapping my custom towbar over. so a swb towbar would fit on a lwb but not the other way around buy pete's bar
|
|
| Author: | rwicks10 [ Tue Nov 13, 2012 12:55 pm ] |
| Post subject: | Re: Tow Bar to suit SV420 |
Hi there Atari, many thanks for your response. I appreciate the time you spent putting the post together. I will be sure to PM Fatzook. Many thanks, rwicks10. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|