i have a good alloy housing that you could grab cheap & get darky to post just the diff centre, good luck finding one local. you'll pay twice as much as what it would cost to post the whole thing from sydney.
pics of carnage NOW!
| auszookers.com http://auszookers.com/forum/ |
|
| Front diff for short wheel base sv420 wanted. http://auszookers.com/forum/viewtopic.php?f=8&t=37995 |
Page 1 of 2 |
| Author: | 98ZOOK [ Sun Dec 30, 2012 12:31 pm ] |
| Post subject: | Front diff for short wheel base sv420 wanted. |
Just demolished my front diff at Loveday. Need a steel one to suit an sv420 but I know they are hard to come by due to demand... Any help please point me in the right direction, based in adelaide. Cheers |
|
| Author: | DarkHorse [ Sun Dec 30, 2012 3:53 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
I've got a stock ally one you can have cheap (although postage won't be) to get you through until you find one... |
|
| Author: | 98ZOOK [ Sun Dec 30, 2012 6:44 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
DarkHorse wrote: I've got a stock ally one you can have cheap (although postage won't be) to get you through until you find one... Thank you, I may be interested... Freight would be excessive from NSW. Ill PM you if I don't fine any other options, cheers |
|
| Author: | atari4x4 [ Sun Dec 30, 2012 7:28 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
i sent 2 diff centres from SA to VIC for $40... was a dollar a kg which wasn't too bad IMO. |
|
| Author: | 98ZOOK [ Mon Dec 31, 2012 2:18 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
atari4x4 wrote: i sent 2 diff centres from SA to VIC for $40... was a dollar a kg which wasn't too bad IMO. Just Had a good look at my diff, freight would be substantial as i need not just the centre but the entire unit. Alloy vitara diffs really are terrible, mine is cracked/shattered everywhere! |
|
| Author: | atari4x4 [ Mon Dec 31, 2012 2:28 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
i have a good alloy housing that you could grab cheap & get darky to post just the diff centre, good luck finding one local. you'll pay twice as much as what it would cost to post the whole thing from sydney. pics of carnage NOW!
|
|
| Author: | 98ZOOK [ Mon Dec 31, 2012 3:21 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
atari4x4 wrote: i have a good alloy housing that you could grab cheap & get darky to post just the diff centre, good luck finding one local. you'll pay twice as much as what it would cost to post the whole thing from sydney. .pics of carnage NOW! Sounds like a plan Atari, Here are some pics.... |
|
| Author: | atari4x4 [ Mon Dec 31, 2012 3:29 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
where & how did you do that  looks like it's just the pinion carrier/3rd member, has it cracked the housing part (looks a bit like a banjo) the housing is just sitting there, shoot us a message if you need it |
|
| Author: | 98ZOOK [ Mon Dec 31, 2012 3:50 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
atari4x4 wrote: where & how did you do that looks like it's just the pinion carrier/3rd member, has it cracked the housing part (looks a bit like a banjo) the housing is just sitting there, shoot us a message if you need it The actual diff case/housing is ok from the looks of it. So I guess the so called "pinion carrier/3rd member" is the damaged part. (im no mechanic) Fairly sure the diff centre is cactus given the lack of drive and sounds that bad boy was making. It happened at loveday 4x4 park on a sand obstacle, so no direct impact to casing. Occurred after both front wheels left the ground, upon their return and subsequent gain of traction that a loud bang was heard, loss of drive, bits of alloy shooting every where and me swearing repeatedly. |
|
| Author: | DarkHorse [ Mon Dec 31, 2012 11:43 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
| Yup, that'll do it! Rip it out and check out your ring & pinion gears, but I'd be surprised if they haven't been munched. I can get a weight and freight quote tomorrow, and get it picked up Wednesday. Let me know what you want and where to send it.
|
|
| Author: | 98ZOOK [ Tue Jan 01, 2013 10:04 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Thanks, Ill pull it out soon and let you both know what I need. Would need to be freighted to Adelaide SA. Thank you both for your help, I will PM you soon. 
|
|
| Author: | 98ZOOK [ Sun May 05, 2013 5:48 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Still looking for front diff centre and alloy housing to suit sv420. Cant find anything in Adelaide wreckers... or they are all just slack and never get back to me. Cheers |
|
| Author: | Chop [ Sun May 05, 2013 7:20 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Get a steel housing or you'll be struggling again to get another alloy one when that one goes bang! |
|
| Author: | 98ZOOK [ Mon May 06, 2013 6:53 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Chop wrote: Get a steel housing or you'll be struggling again to get another alloy one when that one goes bang! Id prefer a steel housing and 5"12 centres but ill take anything ... Has been off the road for a while now because I cant find anything 
|
|
| Author: | christover1 [ Tue May 07, 2013 10:29 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
My steel diff and axle housing was from Qld, it was only $80 for delivery to Melbourne. That was complete with diff and axle still in it. Don't be put off by freighting/postage etc. Try online parts finders, that worked for me. Have seen GV's for wrecking on face book, too. |
|
| Author: | christover1 [ Tue May 07, 2013 10:33 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Sierra front steel 3rd can be made to fit, not simple, but worth considering, as supplies are better. Or strapping down the alloy diff, to help stop explosions |
|
| Author: | 98ZOOK [ Tue May 07, 2013 8:15 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
christover1 wrote: My steel diff and axle housing was from Qld, it was only $80 for delivery to Melbourne. That was complete with diff and axle still in it. Don't be put off by freighting/postage etc. Try online parts finders, that worked for me. Have seen GV's for wrecking on face book, too. Cheers ill case out interstate parts and freight |
|
| Author: | 98ZOOK [ Tue May 07, 2013 8:36 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
If I do look for the best option, a grand vitara steel diff what is the most suited one for a auto sv420 short wheel base? thanks |
|
| Author: | christover1 [ Tue May 07, 2013 8:56 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Mine was from a Manual V6 GV 1998. Pretty sure you need a manual one, though I have heard later model autos had them. The range of models with steel diff is in the Good Tech Bullet proof front diff thread somewhere |
|
| Author: | 98ZOOK [ Wed May 08, 2013 6:41 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Thanks Again Christover1, interstate wrecker called me at 7:45 am with a standard front diff centre and alloy housing for about $300. At least with the stock Ill have some 4x4 ability 
|
|
| Author: | 98ZOOK [ Tue Jun 11, 2013 6:34 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Would a 2.0L V6 auto 1997 vitara front diff fit my 1997 auto 2L 4cly ? I have 39 teeth on the crown wheel and 9 on the pinion.?? |
|
| Author: | atari4x4 [ Tue Jun 11, 2013 6:41 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
the V6 auto would be 4.8:1 |
|
| Author: | 98ZOOK [ Tue Jun 11, 2013 8:42 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
atari4x4 wrote: the V6 auto would be 4.8:1 Thanks wreckers tried to tell me it was the same ratio
|
|
| Author: | 98ZOOK [ Wed Jun 12, 2013 10:59 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
ok now im confused.... I require the front differential to fit a 1997 Suzuki Vitara Sv420 automatic 2L Short Wheel Base 4cl. I need the entire front diff and pinion up to where it attaches to the front drive shaft becuase it all messed up bad upon inspection. I have counted the teeth on the crown wheel; 39 and 9 on the pinion part. Im still not sure what ratio it is and apparently the wreckers cant tell me either, theirs is a 39 and 8 which i guess is 4.8.1. Just need to know if it will fit my car?? sorry for asking so many obvious questions but its doing my head in ha ha |
|
| Author: | 98ZOOK [ Wed Jun 12, 2013 11:09 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Ahhhhh so I would have a 4.3 ratio maybe? 39 / 9 = 4.3 |
|
| Author: | atari4x4 [ Wed Jun 12, 2013 11:13 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
tripple check your tooth count as it doesn't quite seem right to me, was under the impression that the manual SV's were 4.6's & the auto's were 4.8's. to work out the ratio divide 39 by 9 eg: 39/9 = 4.333:1 mark the pinion tooth you're starting with using a scribe or degrease it & use a texta, maybe with the damage you've missed a tooth when counting? |
|
| Author: | christover1 [ Wed Jun 12, 2013 11:27 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
Is it possible a previous owner did a ratio change? |
|
| Author: | atari4x4 [ Wed Jun 12, 2013 11:32 am ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
chris, i've said it before... not too many people bother doing the swap & why would you want to go from a 4.8 to a 4.3, would make it sluggish as hell??? plus, i'm certain it was a pristine one owner unmodified example before he picked it up. |
|
| Author: | 98ZOOK [ Wed Jun 12, 2013 12:55 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
atari4x4 wrote: chris, i've said it before... not too many people bother doing the swap & why would you want to go from a 4.8 to a 4.3, would make it sluggish as hell??? plus, i'm certain it was a pristine one owner unmodified example before he picked it up. Yes I doubt the ratio has been changed by previous owner. I will have to count again, the teeth are fair damaged so maybe but I did get two other people to check it... Thanks guys |
|
| Author: | 98ZOOK [ Wed Jun 12, 2013 12:58 pm ] |
| Post subject: | Re: Front diff for short wheel base sv420 wanted. |
so really I should have 39 on the crown and 8 on the pinion ; 39/8 = 4.8. The pinion is very munched so hopefully im just an idiot, ill check it tonight again. |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|