| auszookers.com http://auszookers.com/forum/ |
|
| Wanted 15X7 jimny rims NT or SA http://auszookers.com/forum/viewtopic.php?f=8&t=43056 |
Page 1 of 1 |
| Author: | shep [ Sat Sep 21, 2013 6:37 am ] |
| Post subject: | Wanted 15X7 jimny rims NT or SA |
I need at least 2 15x7 jimny rims. A set of alloys would be nice however anything to replace the 2 sunnies I have bent would be good. I will be in SA next week and don't mind traveling to pick them up. Failing finding secondhand jobbies can anyone recommend a shop that will have the rims? The shops up here seem to only be able to get -11 offset rims which don't clear the knuckle. |
|
| Author: | atari4x4 [ Sat Sep 21, 2013 11:15 am ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
Do you know the offset of the 15x7's that do fit the Jimny's? |
|
| Author: | christover1 [ Sat Sep 21, 2013 5:27 pm ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
Pretty sure the 5.5" stockers are a 5P EDIT. This topic suggests a few choices. but it is getting old. http://www.vic.suzuki4wd.com/forum/view ... ?f=9&t=129 |
|
| Author: | shep [ Sat Sep 21, 2013 8:53 pm ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
I think mine are -13. Will double check tomorrow |
|
| Author: | 31zook [ Sat Sep 21, 2013 9:05 pm ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
15x7s need to be -8 or greater as they hit the steering arm... |
|
| Author: | christover1 [ Sat Sep 21, 2013 10:24 pm ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
My Dynamics were -13 |
|
| Author: | gregwatkins75 [ Sun Sep 22, 2013 4:54 pm ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
there is a set of sunny sat local u pullit ...... they are 15x something......the guy is holding them till tommorrow for me/ you.. 50 bucks total. they are on a dihatsu rocky with 31 inch bfg ats on so I guess they are around 7 wide... do di hasty have same stud patern? |
|
| Author: | Matthew [ Sun Sep 22, 2013 5:04 pm ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
Mega bargain! Rocky is the same pcd. |
|
| Author: | shep [ Tue Sep 24, 2013 7:27 pm ] |
| Post subject: | Re: Wanted 15X7 jimny rims NT or SA |
Thanks for ya efforts Greg, I don't know what offset they would be on the rocky. I think I will try and find a set of shiny alloys before going to second hand rims. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|