auszookers.com http://auszookers.com/forum/
VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats. http://auszookers.com/forum/viewtopic.php?f=8&t=43528	Page 1 of 1

---

Author:	remydog05 [ Tue Oct 22, 2013 10:31 am ]
Post subject:	VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
As above I need a few bits, let me know via pm if you have any. I need the knuckles to make a rolling chassis complete. The R&P would be very handy. The seats I will need for a roady so standard would be easy. Cheers!

---

Author:	Built4thrashing [ Tue Oct 22, 2013 3:13 pm ]
Post subject:	Re: VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
Mate im pretty sure I have a 4.6 rear diff here. (12 bolt) Ill check and get back to you.

---

Author:	remydog05 [ Wed Oct 23, 2013 9:04 am ]
Post subject:	Re: VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
Cheers mate I have a hunch mine is 10bolt??

---

Author:	tanshi [ Wed Oct 23, 2013 9:11 am ]
Post subject:	Re: VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
its a 10 bolt unless its an sv420

---

Author:	remydog05 [ Wed Oct 23, 2013 9:18 am ]
Post subject:	Re: VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
Thanks tanshi, yes got your Pm will reply now

---

Author:	Built4thrashing [ Wed Oct 23, 2013 5:57 pm ]
Post subject:	Re: VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
Ive got a 4.625 rear diff that's from a Vit / X90. its the larger style centre. $75 and its yours.

---

Author:	remydog05 [ Thu Oct 24, 2013 1:05 pm ]
Post subject:	Re: VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
So that should be 10bolt yeah?

---

Author:	Built4thrashing [ Sat Oct 26, 2013 6:50 pm ]
Post subject:	Re: VIC nt or wt Knuckles/4.6vit rear r&p/ 1L seats.
Its definitely a 12 bolt....Has 12 bolts holding the crown wheel to the centre...... Vit/X90 and GV rears are larger than sierra ones.. Its here if you want it.

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/