auszookers.com :: View topic - WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ410?)

auszookers.com http://auszookers.com/forum/

WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ410?) http://auszookers.com/forum/viewtopic.php?f=8&t=54863	Page 1 of 1

Author:	Briesey [ Thu Dec 07, 2017 7:59 am ]
Post subject:	WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ410?)
Wanting to buy 2 sets of either 4.11 or 4.55 diff gears for a project sierra. Gears will be going into 93 WT diffs, so all that is needed is the gears. Might be a long shot but located Victoria. Cheers!

Author:	Gwagensteve [ Thu Dec 07, 2017 9:17 am ]
Post subject:	Re: WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ4
It’s going to be a VERY long shot because lj80/sj410 gears don’t fit in WT Sierra diffs. You’ll need WT Maruti ratios, (4.1) or early Jimny rear (4.1) There’s no 4.55 for the 1.3 WT diffs, you’ll have to use either 4.57 aftermarket gears or 4.6 vitara carby auto front gears

Author:	Briesey [ Thu Dec 07, 2017 1:02 pm ]
Post subject:	Re: WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ4
As always, I appreciate the knowledge, was under the impression that crown wheel PCD and pinion ID was the same. Honestly looking for anything between 4 and 4.5 that can be used with WT diffs...

Author:	tanshi [ Thu Dec 07, 2017 3:42 pm ]
Post subject:	Re: WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ4
4.3 from grand vitara front diffs also

Author:	suzukitas [ Sun Dec 10, 2017 8:57 pm ]
Post subject:	Re: WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ4
Tanshi has it, 4.3 from a GV front, easily sourced for spares. I have got a pair if you want, happy to freight.

Author:	flymaster [ Mon Feb 19, 2018 7:43 pm ]
Post subject:	Re: WTB: 2 x 4.11 or 4.55 crownwheel and pinion (LJ80 or SJ4
Have two complete Wt Maruti 4.1 diffs in NSW. Text 0457911623 if interested or more info needed.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/