| auszookers.com http://auszookers.com/forum/ |
|
| Front seats and a set of 15" steel wheels for SJ410/SJ413 http://auszookers.com/forum/viewtopic.php?f=8&t=56309 |
Page 1 of 1 |
| Author: | Warb [ Tue Feb 18, 2020 4:51 am ] |
| Post subject: | Front seats and a set of 15" steel wheels for SJ410/SJ413 |
I'm looking for a full set of 8 spoke steel wheels, factory size (15x5.5 +10mm offset, I believe) for an SJ410/SJ413. Bare wheels are fine, or with 215/75 muddies (SJ410 won't turn anything bigger!) Also looking for a pair of front seats in reasonable condition, or non-original seats that will fit. Mid-West NSW, will travel to Sydney. Newcastle etc. |
|
| Author: | 303zuke [ Tue Feb 18, 2020 5:28 pm ] |
| Post subject: | Re: Front seats and a set of 15" steel wheels for SJ410/SJ41 |
Worth the drive?: viewtopic.php?f=7&t=56303 |
|
| Author: | Warb [ Tue Feb 18, 2020 7:43 pm ] |
| Post subject: | Re: Front seats and a set of 15" steel wheels for SJ410/SJ41 |
303zuke wrote: I noticed them and briefly considered it, but it's an 1800km round trip...... |
|
| Author: | suzukitas [ Sun Feb 23, 2020 10:44 pm ] |
| Post subject: | Re: Front seats and a set of 15" steel wheels for SJ410/SJ41 |
I have heaps, and if your happy to clean/paint some, I can do pretty cheap. just get in contact with me 0437097475 Cheers Brad |
|
| Author: | Warb [ Tue Feb 25, 2020 6:30 am ] |
| Post subject: | Re: Front seats and a set of 15" steel wheels for SJ410/SJ41 |
suzukitas wrote: I have heaps, and if your happy to clean/paint some, I can do pretty cheap. just get in contact with me 0437097475 Cheers Brad Where are you located? If you've got 15x5.5 original white spokes then I'm interested - I acquired a set of "round holes" over the weekend, but I'd prefer the 8 spokes! Let me know (roughly) where you are. I'll try to give you a call but I'm a bit busy for the next couple of days - no mobile service in a tractor cab here! |
|
| Author: | suzukitas [ Tue Feb 25, 2020 11:06 pm ] |
| Post subject: | Re: Front seats and a set of 15" steel wheels for SJ410/SJ41 |
I would need to freight them to you, but thats no problem as I do it regularly, and yes factory steel 8 spoke rims. just call when you get a chance to discuss. Cheers Brad |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|