auszookers.com :: View topic - front end drive train parts

I used an Ebay CV a while ago.... It fitted and worked ok... I never broke it before I sold the 22 spline axles..
Trouble with replacing just the cv is getting the old one off the axle without wrecking the spline on the end as the circlip doesn't want to come off and eats the last 5-10mm of axle.
If you have already broken a cv I guess you have nothing to lose by trying to remove it BEFORE you buy a new CV. That way if you do strip the axle you'll buy a 2nd hand axle with cv on it already and won't have a new cv sitting there that you can't use.

Author:	Choppy [ Thu Feb 11, 2010 5:05 pm ]
Post subject:	front end drive train parts
CV's new or secondhand in good nick, having alot of trouble finding any and dont want to pay for genuine ones, free wheeling hubs or perhaps a complete new front diff in good nick, for a 1990 WT sierra cheers choppy

Author:	want33s [ Thu Feb 11, 2010 6:08 pm ]
Post subject:	Re: front end drive train parts
I've got locking hubs but no WT CV's.

Author:	Choppy [ Thu Feb 11, 2010 6:37 pm ]
Post subject:	Re: front end drive train parts
thanks fro ur help jas will get back to u on the hubs, any one with CV's axels etc?? thanks choppy

Author:	MacDaddy [ Thu Feb 11, 2010 8:21 pm ]
Post subject:	Re: front end drive train parts
Heres a listing of CV's on ebay for Suzuki, they have ones for Sierra, will they fit ? - http://shop.ebay.com.au/?_from=R40&_trk ... =Suzuki+CV

Author:	Choppy [ Thu Feb 11, 2010 9:40 pm ]
Post subject:	Re: front end drive train parts
MacBear wrote: Heres a listing of CV's on ebay for Suzuki, they have ones for Sierra, will they fit ? - http://shop.ebay.com.au/?_from=R40&_trk ... =Suzuki+CV thanks MacBear, im not too sure has any one used these before??

auszookers.com http://auszookers.com/forum/

front end drive train parts http://auszookers.com/forum/viewtopic.php?f=8&t=9802	Page 1 of 1

Author:	want33s [ Thu Feb 11, 2010 11:45 pm ]
Post subject:	Re: front end drive train parts
I used an Ebay CV a while ago.... It fitted and worked ok... I never broke it before I sold the 22 spline axles.. Trouble with replacing just the cv is getting the old one off the axle without wrecking the spline on the end as the circlip doesn't want to come off and eats the last 5-10mm of axle. If you have already broken a cv I guess you have nothing to lose by trying to remove it BEFORE you buy a new CV. That way if you do strip the axle you'll buy a 2nd hand axle with cv on it already and won't have a new cv sitting there that you can't use.

Author:	Choppy [ Thu Feb 11, 2010 11:51 pm ]
Post subject:	Re: front end drive train parts
want33s wrote: I used an Ebay CV a while ago.... It fitted and worked ok... I never broke it before I sold the 22 spline axles.. Trouble with replacing just the cv is getting the old one off the axle without wrecking the spline on the end as the circlip doesn't want to come off and eats the last 5-10mm of axle. If you have already broken a cv I guess you have nothing to lose by trying to remove it BEFORE you buy a new CV. That way if you do strip the axle you'll buy a 2nd hand axle with cv on it already and won't have a new cv sitting there that you can't use. that makes absolute complete sense thanks for the heads up jas.

Author:	Choppy [ Fri Feb 12, 2010 12:58 am ]
Post subject:	Re: front end drive train parts
hey guys thanks to everyone for their offers on the parts i was looking for. got it all sorted and should have the car rolling again monday.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/