| Author |
Message |
maloo11
Joined: Tue Jul 27, 2010 6:17 am Posts: 232 Location: NSW
|
 Posted: Wed Sep 01, 2010 11:26 am |
|
|
Until 2 days ago my lights worked fine. Now i have no low beam, high beam and parkers work. Any suggestions? Thanks. ( its a 91 Sierra)
_________________ 91Sierra; 2in lift; 2inBL; 6.5s; 31muds;
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Wed Sep 01, 2010 11:32 am |
|
|
Blown fuse??
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
maloo11
Joined: Tue Jul 27, 2010 6:17 am Posts: 232 Location: NSW
|
 Posted: Wed Sep 01, 2010 11:34 am |
|
|
Nope, checked that.
_________________ 91Sierra; 2in lift; 2inBL; 6.5s; 31muds;
|
|
|
|
 |
89_tintop

az supporter
Joined: Fri Aug 07, 2009 11:30 pm Posts: 3159 Location: gold coast
|
 Posted: Wed Sep 01, 2010 11:35 am |
|
|
Globes??
Had one go and people didnt notice till the 2nd one has gone..
|
|
|
|
 |
Buddies72

az supporter
Joined: Wed Aug 25, 2010 9:14 am Posts: 240 Location: Brisbane
Vehicle: 96 LWB Vit
|
 Posted: Wed Sep 01, 2010 11:38 am |
|
|
Last time that happened to me it was in the switch.
Buddies.
_________________ Buddies
I can't leave well enough alone....
|
|
|
|
 |
maloo11
Joined: Tue Jul 27, 2010 6:17 am Posts: 232 Location: NSW
|
 Posted: Wed Sep 01, 2010 11:40 am |
|
|
Not globes either. Im thinking its the switch or something up in there not connecting properly......? Will have to pull it all out in next few days i think
_________________ 91Sierra; 2in lift; 2inBL; 6.5s; 31muds;
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Wed Sep 01, 2010 11:45 am |
|
|
|
 |
ajsr

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 3712 Location: melb
|
 Posted: Wed Sep 01, 2010 11:47 am |
|
|
earths down near the headlight both sides screwed down tight?
|
|
|
|
 |
Lockie666

az supporter
Joined: Sat Apr 17, 2010 11:30 pm Posts: 1874 Location: Perth
|
 Posted: Wed Sep 01, 2010 12:36 pm |
|
|
Whip out the multimeter mate, I'd be checking all the cables and see if your getting any voltage running though the cable.
_________________ helloo
|
|
|
|
 |
whincup

az supporter
Joined: Sat Apr 17, 2010 11:30 pm Posts: 1588 Location: Gracemere, QLD
Vehicle: '94 suzuki maruti
|
 Posted: Wed Sep 01, 2010 2:03 pm |
|
Lockie666 wrote: Whip out the multimeter mate, I'd be checking all the cables and see if your getting any voltage running though the cable.
x2. best place to start IMO. instead of working out what isnt working, work out what is.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Wed Sep 01, 2010 8:18 pm |
|
|
cmon guys you should all know this one by now
let me guess the high beam dash light lights up on low beam and its all gone strange?
4th fuse in from the left in the top row is blown, it will test ok in there though you need to pull it out and look at it
if its not that one its close to it, cant remember its exact location
|
|
|
|
 |
foonji
Joined: Sun Nov 01, 2009 10:30 pm Posts: 1286
Vehicle: Suzuki
|
 Posted: Thu Sep 02, 2010 12:58 am |
|
|
What Royce said.
If its continually blowing then check your alternator wire is connected and good.
It was continually blowing for me and I found that my problem was that my alternator became disconnected from the loom and when I braked when the lights were on it would blow that fuse..
|
|
|
|
 |
maloo11
Joined: Tue Jul 27, 2010 6:17 am Posts: 232 Location: NSW
|
 Posted: Sat Sep 04, 2010 11:11 pm |
|
|
Its not the fuses. Pulling the switch out today. Wheres the best place for replacement parts?
_________________ 91Sierra; 2in lift; 2inBL; 6.5s; 31muds;
|
|
|
|
 |
Rusho

Tubby Elfsdong
Joined: Sun Aug 02, 2009 11:30 pm Posts: 6501 Location: Northside, Brisbane
Vehicle: Coily Sierra
|
 Posted: Sat Sep 04, 2010 11:15 pm |
|
|
Switch// Send want33's a PM
_________________ Shep is a closet jimny lover!!!!
|
|
|
|
 |
maloo11
Joined: Tue Jul 27, 2010 6:17 am Posts: 232 Location: NSW
|
 Posted: Sun Sep 05, 2010 2:58 am |
|
|
im gettin power to all 3 wires in the light? This cant be right. Even when the light switch is off, im getting power. Has to be switch rite?
_________________ 91Sierra; 2in lift; 2inBL; 6.5s; 31muds;
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Sep 05, 2010 3:01 am |
|
|
they are negative switched, power there all the time and it witches the high or low beam filamnet
unplug both lights and try again, youll have power on one vertical pin only
did you pull the fuse out and test it by itself or not?
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Sun Sep 05, 2010 3:02 am |
|
|
yours must be possessed by jebus.... suzuki's are negatively switched.
_________________ You're just hating because you don't understand
|
|
|
|
 |
maloo11
Joined: Tue Jul 27, 2010 6:17 am Posts: 232 Location: NSW
|
 Posted: Sun Sep 05, 2010 5:05 am |
|
|
ok. i unplugged both lights, have power to one virtical pin as you said. So why is low beam not working? Switch? Hi beam and parkers work fine.
_________________ 91Sierra; 2in lift; 2inBL; 6.5s; 31muds;
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Sep 05, 2010 5:06 am |
|
|
now with both plugs unplugged see if you have earth on the 2 horizontal pins ONLY
|
|
|
|
 |
maloo11
Joined: Tue Jul 27, 2010 6:17 am Posts: 232 Location: NSW
|
 Posted: Sun Sep 05, 2010 7:03 am |
|
|
thanks heaps for your help. Turned out to be a bad earth bad earth.
_________________ 91Sierra; 2in lift; 2inBL; 6.5s; 31muds;
|
|
|
|
 |
GRPABT1
Joined: Mon Nov 19, 2007 10:30 pm Posts: 731 Location: Townsville
Vehicle: 88 SWB WT Sierra soft top ute
|
 Posted: Wed Jan 25, 2012 6:37 pm |
|
|
I had no low beam this morning, not the fuses, guess I gotta check the earths.
|
|
|
|
 |
|