[christover1]

monkey wrote:

I got a reply already

Any one know this mob?

Company: Caloundra Wreckers
Address: Cnr Lynne & Deefa St
City: CALOUNDRA
State: Queensland
Postcode: 4551
Phone: 07 5491 1668
Fax: 07 5491 1035

Pretty sure they are same company as Marybourough wreckers, where I got my GV steel front diff from.
I had no problems with them.

[monley]

christover1 wrote:

monkey wrote:

I got a reply already

Any one know this mob?

Company: Caloundra Wreckers
Address: Cnr Lynne & Deefa St
City: CALOUNDRA
State: Queensland
Postcode: 4551
Phone: 07 5491 1668
Fax: 07 5491 1035

Pretty sure they are same company as Marybourough wreckers, where I got my GV steel front diff from.
I had no problems with them.

That's good to hear!

[SSSIERA]

monkey wrote:

They wanted $880 for just a bare housing

who did u speek to? that dont sound right at all.
sorry monkey ill see if i can get it a bit cheeper for ya, i thought they were prety reasonable price wise but id have told them were to stick that idear.


ive been getting 100% discount there! so when he told me he would look after ya i thought he would lol.

realy sorry mate

[Fatzook]

SSSIERA wrote:

monkey wrote:

They wanted $880 for just a bare housing

who did u speek to? that dont sound right at all.
sorry monkey ill see if i can get it a bit cheeper for ya, i thought they were prety reasonable price wise but id have told them were to stick that idear.


ive been getting 100% discount there! so when he told me he would look after ya i thought he would lol.

realy sorry mate

100% discount is free numbnuts.

[christover1]

With most wreckers,
price is subject to change,
dependant on customers attitude

[monley]

SSSIERA wrote:

monkey wrote:

They wanted $880 for just a bare housing

who did u speek to? that dont sound right at all.
sorry monkey ill see if i can get it a bit cheeper for ya, i thought they were prety reasonable price wise but id have told them were to stick that idear.


ive been getting 100% discount there! so when he told me he would look after ya i thought he would lol.

realy sorry mate

Not sure who i spoke to, can you get me %100 discount?

[christover1]

Bit hard to slip a whole diff into a pocket

[atari4x4]

thats when mc hammer pants would come in handy.

[christover1]

atari4x4 wrote:

thats when mc hammer pants would come in handy.

Nah, mine would be too full with my man bits

[monley]

Ok i have had about 4 reply's so far in less than 24 hours !

The price vary's soooooooooooo much

Quote:

WE SELL ONLY AS A COMPLETE UNIT $495
PLEASE CALL OFFICE TO ORDER 0755717011

Quote:

In stock $770 + $150 delivery
Complete minus diff centre

Quote:

are frt diff housing $440.00

Quote:

2009 SUZUKI JIMNY
BARE FRONT DIFF HOUSING
$330

The $330 one is looking good so far! I rang the other mob today for a price, but when he rang back, i was at work and could not answer the phone

[alien]

complete unit for $495 is better! then you just bolt it in, fill with oil and you're away! then in the meantime get the other one straigtened and gussetted and when you have the $$ get a locker put into that diff and again do a hot swap.

then you're left with a spare front end too.

[monley]

alien wrote:

complete unit for $495 is better! then you just bolt it in, fill with oil and you're away! then in the meantime get the other one straigtened and gussetted and when you have the $$ get a locker put into that diff and again do a hot swap.

then you're left with a spare front end too.

If i was to buy the whole diff, it would get that one braced and locker out in at the same time, i really need to check to see if my axles/splines are damaged, from the bend before, i go ahead and buy any thing

[christover1]

delivery costs may be higher on heavier complete units, too

[monley]

Yeh that is true! What state has the phone number starting with '02'?

[christover1]

monkey wrote:

Yeh that is true! What state has the phone number starting with '02'?

nsw

[monley]

christover1 wrote:

monkey wrote:

Yeh that is true! What state has the phone number starting with '02'?

nsw

Ok thanks! Freight might be a bit exy...

[Lockie666]

monkey wrote:

Ok i have had about 4 reply's so far in less than 24 hours !

The price vary's soooooooooooo much

Quote:

WE SELL ONLY AS A COMPLETE UNIT $495
PLEASE CALL OFFICE TO ORDER 0755717011

Quote:

In stock $770 + $150 delivery
Complete minus diff centre

Quote:

are frt diff housing $440.00

Quote:

2009 SUZUKI JIMNY
BARE FRONT DIFF HOUSING
$330

The $330 one is looking good so far! I rang the other mob today for a price, but when he rang back, i was at work and could not answer the phone

There is a bit of work putting all the old stuff into another housing you know. If it is bare might not have a pinion, even with one changing the center over requires knowledge and the right tools.

[monley]

Lockie666 wrote:

monkey wrote:

Ok i have had about 4 reply's so far in less than 24 hours !

The price vary's soooooooooooo much

Quote:

WE SELL ONLY AS A COMPLETE UNIT $495
PLEASE CALL OFFICE TO ORDER 0755717011

Quote:

In stock $770 + $150 delivery
Complete minus diff centre

Quote:

are frt diff housing $440.00

Quote:

2009 SUZUKI JIMNY
BARE FRONT DIFF HOUSING
$330

The $330 one is looking good so far! I rang the other mob today for a price, but when he rang back, i was at work and could not answer the phone

There is a bit of work putting all the old stuff into another housing you know. If it is bare might not have a pinion, even with one changing the center over requires knowledge and the right tools.

Want to do a cash job one week end then?

[Lockie666]

monkey wrote:

Lockie666 wrote:

monkey wrote:

Ok i have had about 4 reply's so far in less than 24 hours !

The price vary's soooooooooooo much

Quote:

WE SELL ONLY AS A COMPLETE UNIT $495
PLEASE CALL OFFICE TO ORDER 0755717011

Quote:

In stock $770 + $150 delivery
Complete minus diff centre

Quote:

are frt diff housing $440.00

Quote:

2009 SUZUKI JIMNY
BARE FRONT DIFF HOUSING
$330

The $330 one is looking good so far! I rang the other mob today for a price, but when he rang back, i was at work and could not answer the phone

There is a bit of work putting all the old stuff into another housing you know. If it is bare might not have a pinion, even with one changing the center over requires knowledge and the right tools.

Want to do a cash job one week end then?

Keep me informed, depends how much of a good bloke you are

[monley]

Lockie666 wrote:

monkey wrote:

Lockie666 wrote:

monkey wrote:

Ok i have had about 4 reply's so far in less than 24 hours !

The price vary's soooooooooooo much

Quote:

WE SELL ONLY AS A COMPLETE UNIT $495
PLEASE CALL OFFICE TO ORDER 0755717011

Quote:

In stock $770 + $150 delivery
Complete minus diff centre

Quote:

are frt diff housing $440.00

Quote:

2009 SUZUKI JIMNY
BARE FRONT DIFF HOUSING
$330

The $330 one is looking good so far! I rang the other mob today for a price, but when he rang back, i was at work and could not answer the phone

There is a bit of work putting all the old stuff into another housing you know. If it is bare might not have a pinion, even with one changing the center over requires knowledge and the right tools.

Want to do a cash job one week end then?

Keep me informed, depends how much of a good bloke you are

[christover1]

My GV steel vitara front diff came from Maryborough QLD,
to Melbourne for $80.
It was complete, of course not a full size like a Jim, but still heavy.

[atari4x4]

christover1 wrote:

My GV steel vitara front diff came from Maryborough QLD,
to Melbourne for $80.
It was complete, of course not a full size like a Jim, but still heavy.

= 30kgs

[christover1]

atari4x4 wrote:

christover1 wrote:

My GV steel vitara front diff came from Maryborough QLD,
to Melbourne for $80.
It was complete, of course not a full size like a Jim, but still heavy.

= 30kgs

Had nearly 5kg of bubble wrap and tape added too )

[bakerboy]

alien wrote:

complete unit for $495 is better! then you just bolt it in, fill with oil and you're away! then in the meantime get the other one straigtened and gussetted and when you have the $$ get a locker put into that diff and again do a hot swap.

then you're left with a spare front end too.

x2

Get it running so you can build up a tough front end in your spare time

[MrRocky]

bakerboy wrote:

alien wrote:

complete unit for $495 is better! then you just bolt it in, fill with oil and you're away! then in the meantime get the other one straigtened and gussetted and when you have the $$ get a locker put into that diff and again do a hot swap.

then you're left with a spare front end too.

x2

Get it running so you can build up a tough front end in your spare time

x3

[monley]

MrRocky wrote:

bakerboy wrote:

alien wrote:

complete unit for $495 is better! then you just bolt it in, fill with oil and you're away! then in the meantime get the other one straigtened and gussetted and when you have the $$ get a locker put into that diff and again do a hot swap.

then you're left with a spare front end too.

x2

Get it running so you can build up a tough front end in your spare time

x3

If i really wanted a strong front diff, i would up a w/t diff, but that is bit out of my depth ATM....

[smiffkid]

lux diffs are the shit

[MrRocky]

lux diffs are shit on zooks

[SSSIERA]

Fatzook wrote:

SSSIERA wrote:

monkey wrote:

They wanted $880 for just a bare housing

who did u speek to? that dont sound right at all.
sorry monkey ill see if i can get it a bit cheeper for ya, i thought they were prety reasonable price wise but id have told them were to stick that idear.


ive been getting 100% discount there! so when he told me he would look after ya i thought he would lol.

realy sorry mate

100% discount is free numbnuts.

I KNOW .

[bakerboy]

So where's his cheap diff housing? Lol