[strop]

hey everyone just about at the end of my conversion of a g16b into my sierra. However I didn't get the wiring to the cluster so from the diagram I had I couldn't quite work it out.

So could someone let me know what colors you come up with for the engine light, vss, tacho, I think that's all I'm after??

[11_evl]

when i did mine it was all the same as the sierra colours..ie the temp oil press charge light. vss had to be added

[strop]

Yes that's right but I'm really after vss colour and engine light

[strop]

Bump

[Fatzook]

VSS and check eng are usually Violet with yellow trace.

[strop]

Do you know the tacho one also??

[royce]

tacho is plain brown

[strop]

Thought as much just double checking so I don't do any damage cheers guys

[reeceh]

so ive got a plain brown wire in my loom where abouts do you hook it up to the tacho

[strop]

im still pretty unclear as the what the vss is and the the check engine light??

[strop]

whait i have found the vss and found how the check engine light is wired in, im mainly after a throttle position sensor number.... mine is rubbed off, if you have all the following can you post a picture of your code please, its really hard to order something new when you have no code all i keep getting in return is that there is a few to choose from

its a 96/97 model engine, mitsubishi computer, three pin MAF meter, 4 pin TPS, 7 pin (i think from memory) distributor this has coil all in one. please help me someone....

[strop]

Bump, anyone

[steak_knife]

strop wrote:

whait i have found the vss and found how the check engine light is wired in, im mainly after a throttle position sensor number.... mine is rubbed off, if you have all the following can you post a picture of your code please, its really hard to order something new when you have no code all i keep getting in return is that there is a few to choose from

its a 96/97 model engine, mitsubishi computer, three pin MAF meter, 4 pin TPS, 7 pin (i think from memory) distributor this has coil all in one. please help me someone....

because there is.......

I could give you the number of mine & it may not work with your ecu,

[steak_knife]

If you can get the VIN off the car the eng came out of, a Suzuki dealer "should" be able to help.

[strop]

Well its in my sierra, and I do realise that, so that's why I put all my info up so that someone with the same computer etc, please.

[strop]

It runs but not driveable at the moment

[atari4x4]

post some decent clear pics of the TPS & someone might be able to pick which one it is.

[reeceh]

Bit of a bump where abouts do u tap the brown tacho wire into from the g16b loom??

[reeceh]

Anyone be able to point me in the right direction? I'm confused as to hook it into the cluster loom or behind the actual instrument!

[strop]

The brown wire from the sierra loom isn't used and runs off the old motor to the instrument cluster and this gives you your tacho, but there is a brown wire in the vitara loom that does the same thing you simply have to cut the old wire to the cluster and join the vitara one.

[reeceh]

Thankyou that's the answer I was looking for