[boostedbrick]

Anyone have any tips for getting a stuck speedo output out? This thing is well stuck, I bent my vice grips trying to spin it out...

[skyman]

I know it is obvious, but is the set Bolt loosened?

[boostedbrick]

Yep its been removed... I have the case apart to change bearings, just cant get the last gears out.

[want33s]

Vise grips locked onto it and a screwdriver through through the jaws to twist it. Once it can wiggle it should pop out.

Rarely they call for a bit more effort to remove them..EG slide hammer.

[Daves4wd]

I pulled mine out just then with needle nose pliers but it wasent Stuck try some crc and let it soak in then try again

[boostedbrick]

Did want33s trick and got it out in the end, had been soaking in WD40 overnight... There was a fair amount of sand in there.. Definitely tighter than other cases I pulled apart.