auszookers.com • View topic - Where can I get new diff plugs?

Board index » Talking About Stuff » Suzuki Talk

Where can I get new diff plugs?

Page 1 of 1

[ 15 posts ]

Print view

Previous topic | Next topic

Author

Message

kd883

Joined: Wed Feb 29, 2012 6:26 pm
Posts: 62
Vehicle: 1994 WT Sierra

Posted: Mon Nov 19, 2012 8:38 am

Hi guys,

I'd like to replace the oil in the diff's but the plugs look pretty shagged. I'm expecting they will probably be unusable by the time I get them out. Does anyone know where I can get some new ones?

Cheers,

KD.

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Mon Nov 19, 2012 9:15 am

kd883 wrote:

Does anyone know where I can get some new ones?

Suzuki Shops...
Dealerships...

What model - here is one for a WT Sierra...
http://www.suzistore.com.au/shopexd.asp?id=16

mrw82

az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Posted: Mon Nov 19, 2012 9:28 am

Enzed / pirtek etc. Thread is 1/2"BSPT

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Nov 19, 2012 9:43 am

mrw82 wrote:

Enzed / pirtek etc. Thread is 1/2"BSPT

Never realised they were tapered thread...

EDIT: Well I'm sure the fill plug is BSPP. They use a nylon washer for seal.

_________________
2013 GV
1998 SV420 ute

mrw82

az supporter

Joined: Tue Jul 03, 2007 11:30 pm
Posts: 1350
Location: stuck in a hole. not off road, just deception bay.
Vehicle: snotbox, 84 LWB sierra 1 litre

Posted: Mon Nov 19, 2012 10:29 am

1 litre and narrow track are tapered, never looked at a wide track to notice, just assumed it would be the same. A tapered plug will work anyway, bit of thread tape and nip it up.

fritter

az supporter

Joined: Sun Sep 19, 2010 9:30 am
Posts: 1163
Location: Wahroonga NSW
Vehicle: 89 Vit. The Desert Rat...

Posted: Mon Nov 19, 2012 10:32 am

mrw82 wrote:

Enzed / pirtek etc. Thread is 1/2"BSPT

Bunnings... About $1.70 each.

_________________
Katherine 2013!

Jackson

Joined: Mon Apr 04, 2011 5:56 am
Posts: 559
Location: Newcastle
Vehicle: Yellow Ute

Posted: Mon Nov 19, 2012 11:35 am

mrw82 wrote:

1 litre and narrow track are tapered, never looked at a wide track to notice, just assumed it would be the same. A tapered plug will work anyway, bit of thread tape and nip it up.

WT drain is the same as 1ltr but fillers are different, I tried to use 1ltr ones in my WT diffs so I would have hex key instead of square, but the filler one is different.

joel

Joined: Wed Jan 27, 2010 10:30 pm
Posts: 2191
Location: Dirranbandi
Vehicle: Sj70 tintop

Posted: Mon Nov 19, 2012 11:36 am

wreckers should have them.

kd883

Joined: Wed Feb 29, 2012 6:26 pm
Posts: 62
Vehicle: 1994 WT Sierra

Posted: Mon Nov 19, 2012 1:49 pm

Quote:

Bunnings... About $1.70 each.

Fritter, could you please tell me where in Bunnings and what they would be called?

KD.

kd883

Joined: Wed Feb 29, 2012 6:26 pm
Posts: 62
Vehicle: 1994 WT Sierra

Posted: Mon Nov 19, 2012 1:50 pm

Also, any tips on getting them out? Squares are gone.

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Mon Nov 19, 2012 2:03 pm

kd883 wrote:

Also, any tips on getting them out? Squares are gone.

Have you tried a proper 10mm square tool - not a 3/8" drive?

Failing that - welder...

GeckoXL7

az supporter

Joined: Tue Sep 25, 2012 8:12 pm
Posts: 1173
Location: VIC
Vehicle: 2002 Suzuki XL7

Posted: Mon Nov 19, 2012 2:20 pm

I used a Electric impact wrench from Supercheap cost $46, couple of cracks they came out.

A normal socket driver kept slipping, mines been chewed up bad too, as reubs said can get the tool, the Impact wrench fitted perfect.

fritter

az supporter

Joined: Sun Sep 19, 2010 9:30 am
Posts: 1163
Location: Wahroonga NSW
Vehicle: 89 Vit. The Desert Rat...

Posted: Mon Nov 19, 2012 4:14 pm

kd883 wrote:

Quote:

Bunnings... About $1.70 each.

Fritter, could you please tell me where in Bunnings and what they would be called?

KD.

In the plumbing section. Just ask for a 1/2 inch bsp. The one's I got have a thin 21mm head on them, so no more messing with the 10mm drive.

_________________
Katherine 2013!

KEENSY85

Joined: Wed May 09, 2012 12:46 am
Posts: 1742
Location: north brisbane
Vehicle: 1985 lwb sierra UTE

Posted: Mon Nov 19, 2012 5:57 pm

Hamer and small centre punch or chisel carefully tap it around

303zuke

az supporter

Joined: Wed Aug 19, 2009 11:30 pm
Posts: 2447
Vehicle: LJ50V, SJ70

Posted: Mon Nov 19, 2012 10:01 pm

Reubs wrote:

kd883 wrote:

Does anyone know where I can get some new ones?

Suzuki Shops...
Dealerships...

What model - here is one for a WT Sierra...
http://www.suzistore.com.au/shopexd.asp?id=16

Low Range Offroad also sell the Genuine ones, worth getting them to throw in a couple when you next place an order with them:

http://www.lowrangeoffroad.com/index.ph ... plugs.html

Page 1 of 1

[ 15 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 46 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum