It is currently Fri Jul 24, 2026 4:25 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 11 posts ] 
Author Message

Offline

Joined: Wed Jan 10, 2018 3:00 pm
Posts: 20
Vehicle: lj50

Post Posted: Sun Aug 26, 2018 7:15 am 
Reply with quote Top  
Hi all,
Chasing an oversize piston and ring set for an LJ 50. Can anyone point me in the right direction?
Actually doing a full rebuild so any info on sourcing parts for the little 2 banger would be helpful

Cheers, Boofdog

 Profile  

Offline

Joined: Sun Dec 27, 2015 3:07 am
Posts: 109
Location: Wallington, Victoria
Vehicle: 1993 Suzuki Sierra 1.3 SWB

Post Posted: Wed Aug 29, 2018 7:12 pm 
Reply with quote Top  
Boofdog,

I had an LJ50 in the 70's, I replaced the pistons with the pistons from the 3 cyl 2 stroke van, not sure of the engine designation but you should be able to source that online, I had to have the engine bored to accept the 2 stroke van pistons as they were a fair bit larger and from memory it upped the capacity to 650 - 660 cc, no other modifications were done to the engine the increase in performance was quite noticeable. I will look online and see if I can find any other info for you. regards barbender.

 Profile  

Offline

Joined: Wed Jan 10, 2018 3:00 pm
Posts: 20
Vehicle: lj50

Post Posted: Thu Aug 30, 2018 12:44 pm 
Reply with quote Top  
Cheers Barbender,

Have found a set of standard pistons and rings, but definitely need a re bore, so will have to go oversize. I thought the old 2 stroke van had the same lj50 motor. Someone told me they used to do three oversizes, .5mm, .75mm, 1mm
I did happen to find one 1mm over piston, but really need a full set and rings as well.

 Profile  

Offline

Joined: Wed Aug 26, 2015 10:48 pm
Posts: 245
Vehicle: sc100 se416 mightyboy

Post Posted: Thu Aug 30, 2018 9:54 pm 
Reply with quote Top  
I have plenty of used engine parts for the 2 stroke, but nothing aftermarket like oversized pistons etc.

_________________
Why make your Suzuki like a Vitara, Just get one.

 Profile  

Offline

Joined: Sun Dec 27, 2015 3:07 am
Posts: 109
Location: Wallington, Victoria
Vehicle: 1993 Suzuki Sierra 1.3 SWB

Post Posted: Fri Aug 31, 2018 11:23 am 
Reply with quote Top  
There was a thread started by tanshi, post date Sunday October 24th, 2010 at 7:17 am. similar to what you want, regarding the Suzuki Carry engine, I am looking for an old 4x4 mag that had a lot of info on this when I rebuilt my LJ50, if I can find it I will scan it and email it to you. regards, barbender

 Profile  

Offline

Joined: Wed Jan 10, 2018 3:00 pm
Posts: 20
Vehicle: lj50

Post Posted: Wed Sep 05, 2018 8:00 pm 
Reply with quote Top  
Cheers barbender,
Any info is helpful!! I am talking to a bloke who may be able to sleeve the damaged bore so that the standard size pistons can be used.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Post Posted: Fri Sep 07, 2018 1:12 pm 
Reply with quote Top  
you can buy them new on EBAY

 Profile  

Offline

Joined: Wed Jan 10, 2018 3:00 pm
Posts: 20
Vehicle: lj50

Post Posted: Fri Sep 07, 2018 3:31 pm 
Reply with quote Top  
Yes tanshi, only in standard size. Was just seeing if anyone knew where to get OVERSIZE. All good I'll get there!

 Profile  

Offline

Joined: Sat Aug 13, 2011 11:44 pm
Posts: 63
Location: bairnsdale
Vehicle: 1973 lj50 fully restored

Post Posted: Mon Sep 10, 2018 8:03 pm 
Reply with quote Top  
Full engine rebuild kits for all Suzuki models with several os piston sizes are available from 4x4 parts on e bay good quality and price have used them several times for Suzy parts new owners but still good service.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Post Posted: Thu Sep 13, 2018 10:22 am 
Reply with quote Top  
you can get OS size ones on ebay bud

 Profile  

Offline

Joined: Wed Jan 10, 2018 3:00 pm
Posts: 20
Vehicle: lj50

Post Posted: Thu Sep 27, 2018 10:35 am 
Reply with quote Top  
Cheers Guys,

I have got hold of a set!!

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 306 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours