auszookers.com
https://auszookers.com/forum/

Sierra Soft Top inside interior pannels COMPLETE
https://auszookers.com/forum/viewtopic.php?f=14&t=13560		 Page 1 of 1
Author:  shane1992 [ Thu Jul 15, 2010 3:54 am ]
Post subject:  Sierra Soft Top inside interior pannels COMPLETE
Wanted to make the Sierra abit mor nice looking in the back :)
So I made some interior panels up from scratch :)


One of the Templates to start with
Image

Tail gate, and drivers side and passenger side panels cut out.
Image

Drivers side and passenger side rear quarters carpeted, Turned out smick as :)
Image

Rear Tail gate carpet with mounts for speakers, also turned out smickkkk as :)
Image
Will post more picks up when its all fitted in :)


Also, Im happy to share the templates with anyone, as they are the hardest bits to get right, then its easy as :)
Author:  eldo [ Thu Jul 15, 2010 4:15 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
only problem is if its mdf it wont like getting wet, otherwise nice work
Author:  Fatzook [ Thu Jul 15, 2010 6:17 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
eldo wrote:
only problem is if its mdf it wont like getting wet, otherwise nice work


You can get marine MDF if you got plenty $$$ :D
Author:  brent [ Thu Jul 15, 2010 6:37 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
That's neat! I'm off to bunnings.
Author:  zukmeista [ Thu Jul 15, 2010 6:40 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Nice job!!!
Author:  shane1992 [ Thu Jul 15, 2010 7:21 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
For those 3 pannels, cost me just under $40 for the mdf, carpet, glue and tacks

:D
Author:  Chopz [ Thu Jul 15, 2010 9:18 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
or if ya work on a site like myself, i would just grab some form board.
waterproof, and free!

but looks great mate none the less! :wink: :P
Author:  Fatzook [ Thu Jul 15, 2010 11:35 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Chopz wrote:
or if ya work on a site like myself, i would just grab some form board.
waterproof, and free!

but looks great mate none the less! :wink: :P


And heavy :cry: And thick :cry: But FREE Armsup Armsup Armsup
Author:  Bucket [ Thu Jul 15, 2010 12:31 pm ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Looks tidy as!
Need more pics of them installed though :p
Author:  Chopz [ Thu Jul 15, 2010 1:10 pm ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Fatzook wrote:
Chopz wrote:
or if ya work on a site like myself, i would just grab some form board.
waterproof, and free!

but looks great mate none the less! :wink: :P


And heavy :cry: And thick :cry: But FREE Armsup Armsup Armsup



yeah 1 out of 3 aint bad :wink: :D :D :D
Author:  sbbunno [ Thu Jul 15, 2010 2:08 pm ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Danm why didnt i think of that :D
good job i like the speaker's 8)
Author:  BlueSuzy [ Fri Jul 16, 2010 1:56 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Nice work. They will act as a small sound deadner also.
Author:  Lokidog [ Fri Jul 16, 2010 8:13 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Author:  dawsey [ Fri Jul 16, 2010 8:39 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
looks pretty flash im doin mine at the moment..used marine vinyl on marine ply..Im also knocking up a drop on cage for my dogs so it needs to be pretty water resistant..same shape as the fibreglass roof
Author:  shane1992 [ Mon Jul 19, 2010 2:29 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels :)
Image
Image
Image
Image
Author:  boostedbrick [ Thu Jul 22, 2010 11:08 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels COMPLETE
Abit of ply does the job, clear varnish to seal it. Easy enough to rub back and redo if it gets marked. I noticed alot of people make cut outs for the bars in the side panels.. I just put a 12mm hole thru the panel and screwed it into that, seems tobe a bit neater. although that carpet looks pretty trick, good work bud!

Image
Image
Author:  shane1992 [ Fri Jul 23, 2010 12:40 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels COMPLETE
Cheers mate!
Yeah the ply looks nice too, I had that in mind too hey. And good thinking about screwing the bar work over the top of it, looks neater and would of been ALOT easier and less fidling around with getting the carpet folded around it haha.

Shane
Author:  UBZ [ Fri Jul 23, 2010 1:34 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels COMPLETE
the only problem with ply is that when you stick the truck on its side and stove the door in, the ply will splinter inward ......
Author:  sierrajim [ Mon Jul 26, 2010 2:07 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels COMPLETE
If you're just going to tech screw it on why not use coreflute?

Image
Author:  atari4x4 [ Mon Jul 26, 2010 2:21 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels COMPLETE
coreflute is the future, waterproof, lightweight & there is plenty of it floating around at the moment with the elections on....
Author:  driftr [ Mon Jul 26, 2010 2:38 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels COMPLETE
corflute supposedly makes great slides for sand dunes :)
Author:  shane1992 [ Mon Jul 26, 2010 4:04 am ]
Post subject:  Re: Sierra Soft Top inside interior pannels COMPLETE
I didn't want to use coreflute ...
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/