the laser trailer....
| auszookers.com https://www.auszookers.com/forum/ |
|
| ZEUSvsHADES my camper trailer https://www.auszookers.com/forum/viewtopic.php?f=14&t=21355 |
Page 1 of 2 |
| Author: | ZEUSvsHADES [ Tue Apr 26, 2011 8:37 am ] |
| Post subject: | ZEUSvsHADES my camper trailer |
the laser trailer....
|
|
| Author: | alexvitara [ Tue Apr 26, 2011 8:50 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
| Author: | atari4x4 [ Tue Apr 26, 2011 8:53 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
|
| Author: | stockman [ Tue Apr 26, 2011 8:59 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
| Author: | boostedbrick [ Tue Apr 26, 2011 9:01 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
Some people shouldnt be let near a grinder. |
|
| Author: | Fatzook [ Tue Apr 26, 2011 9:01 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
|
| Author: | Joe [ Tue Apr 26, 2011 9:04 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
| Author: | monley [ Tue Apr 26, 2011 9:06 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
| Author: | ZEUSvsHADES [ Tue Apr 26, 2011 9:22 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
boostedbrick wrote: Some people shouldnt be let near a grinder.
whats that supposed to mean? im a qualified boilermaker, earnt two welding certificates before i even finished my trade, and i won apprentice of the year 3 times. so what gives YOU the right to say a comment like that? |
|
| Author: | stockman [ Tue Apr 26, 2011 9:29 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
He said grinder not welder. |
|
| Author: | boostedbrick [ Tue Apr 26, 2011 9:29 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
Didnt say anything about your qualifacations dude.. Let me reword that post then... Hi sir, nice trailer. Not my cup of tea. |
|
| Author: | ZEUSvsHADES [ Tue Apr 26, 2011 9:33 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
fair enough, but i obviously used a grinder to cut the front off, and so i took it as a personal attack. im sure you can understand how/why i would have felt that way |
|
| Author: | abclarke [ Tue Apr 26, 2011 9:34 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
ZEUSvsHADES wrote: boostedbrick wrote: Some people shouldnt be let near a grinder. whats that supposed to mean? im a qualified boilermaker, earnt two welding certificates before i even finished my trade, and i won apprentice of the year 3 times. so what gives YOU the right to say a comment like that? Haha everyone must be a little hung over and snappy after the long long weekend
And really, boilermaker is just an over qualified welder   
|
|
| Author: | Fatzook [ Tue Apr 26, 2011 9:35 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
boostedbrick wrote: Didnt say anything about your qualifacations dude.. Let me reword that post then...
Hi sir, nice trailer. Not my cup of tea.
|
|
| Author: | Damo [ Thu Apr 28, 2011 11:14 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
It may not be everyone's cup of tea but it's the best use of a Laser i've ever seen! Bravo Sir!
|
|
| Author: | rick1970 [ Thu Apr 28, 2011 7:52 pm ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
Seen something similar years ago, but was none on an Escort panelvan. Looked a bit weird but served the purpose i guess. |
|
| Author: | IN2DEP [ Fri Apr 29, 2011 2:10 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
Got pics of the inside ? |
|
| Author: | 31zook [ Fri Apr 29, 2011 5:26 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
abclarke wrote: And really, boilermaker is just an over qualified welder
fitters are just a bunch of hand flopping girls, bring it on, i can lift way heavy stuff!!!!!!!!  
|
|
| Author: | Chop [ Fri Apr 29, 2011 7:28 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
| Author: | daisy [ Fri Apr 29, 2011 8:26 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
Each to their own... (4x4 laser)
but as said above... best use for a laser as a camper trailer so far. I have one myself but a newer model - KN and they go and go and go... bloody reliable shitboxes... |
|
| Author: | Pubic [ Fri Apr 29, 2011 10:40 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
31zook wrote: abclarke wrote: And really, boilermaker is just an over qualified welder fitters are just a bunch of hand flopping girls, bring it on, i can lift way heavy stuff!!!!!!!! sheety's are where its at biatches, not rough enough to work to 30mm tolerances and not too nancy to worry about getting your hands dirty 
|
|
| Author: | Pubic [ Fri Apr 29, 2011 10:41 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
oh by the way, where are some pics of the inside mate. nice use of the laser. |
|
| Author: | ZEUSvsHADES [ Fri Apr 29, 2011 11:26 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
will get some eventually, its parked at a mates atm |
|
| Author: | abclarke [ Fri Apr 29, 2011 12:00 pm ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
Pubic wrote: 31zook wrote: abclarke wrote: And really, boilermaker is just an over qualified welder fitters are just a bunch of hand flopping girls, bring it on, i can lift way heavy stuff!!!!!!!! sheety's are where its at biatches, not rough enough to work to 30mm tolerances and not too nancy to worry about getting your hands dirty Haha sheetys and boilys would be having a good day if they got tolerances inside of 30mm 
You chop shop boys would thing a grinding mic is just a calibrated g clamp
|
|
| Author: | monley [ Fri Apr 29, 2011 12:07 pm ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
abclarke wrote: Pubic wrote: 31zook wrote: abclarke wrote: And really, boilermaker is just an over qualified welder fitters are just a bunch of hand flopping girls, bring it on, i can lift way heavy stuff!!!!!!!! sheety's are where its at biatches, not rough enough to work to 30mm tolerances and not too nancy to worry about getting your hands dirty Haha sheetys and boilys would be having a good day if they got tolerances inside of 30mm You chop shop boys would thing a grinding mic is just a calibrated g clamp 30mm tolerance
|
|
| Author: | Nagz [ Fri Apr 29, 2011 10:53 pm ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
Chop wrote: 8O
hahahahah that gave me an my mate an idea........... 4WD S14 lol |
|
| Author: | ZEUSvsHADES [ Sun May 08, 2011 8:33 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
|
|
| Author: | zukenutter [ Tue May 10, 2011 9:47 pm ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
at least the laser body offers more space than my old Sierra trailer. Plus 5 door access. Looks like a fair bit of weight would be on the ball, what's it like to tow? |
|
| Author: | PJ.zook [ Wed May 11, 2011 6:53 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
It is certainly an unusual idea, I like. BTW dont take anything personal on this forum, you will really know when its personal and not just a lighthearted joke/jab. |
|
| Author: | ZEUSvsHADES [ Wed May 11, 2011 10:29 am ] |
| Post subject: | Re: ZEUSvsHADES my camper trailer |
well i tow it with a 95 lancer, until my sierra is on the road and it tows fine. its a bit heavy on the ball, im only 65kg and i can lift, it at the hitch so it cant be that heavy, in comparison to my old 15ft caravan that i couldnt budge. thanks pj.zook, im always in defence mode cos i generally think outside the box and people often hurl negative comments. i cant really help but think its personal |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|