Here is a comp/ tube tray I am doing.
Pics from last week. Should have some finished ones tomorrow. ( camera is playing up
)
| auszookers.com https://auszookers.com/forum/ |
|
| Tube tray https://auszookers.com/forum/viewtopic.php?f=14&t=30382 |
Page 1 of 4 |
| Author: | Fatzook [ Sat Feb 11, 2012 9:50 pm ] |
| Post subject: | Tube tray |
Here is a comp/ tube tray I am doing. Pics from last week. Should have some finished ones tomorrow. ( camera is playing up )
|
|
| Author: | Polar_Bear [ Sat Feb 11, 2012 10:48 pm ] |
| Post subject: | Re: Tube tray |
doesnt look like there is much 'tray' there at all 
|
|
| Author: | DarkHorse [ Sun Feb 12, 2012 1:17 am ] |
| Post subject: | Re: Tube tray |
Not much 'workshop' either, but the shit that keeps getting churned outta there is always purrty. |
|
| Author: | atari4x4 [ Sun Feb 12, 2012 8:39 am ] |
| Post subject: | Re: Tube tray |
nice monkey bars |
|
| Author: | Fatzook [ Sun Feb 12, 2012 9:33 am ] |
| Post subject: | Re: Tube tray |
Polar_Bear wrote: doesnt look like there is much 'tray' there at all Not much wheelbase either... |
|
| Author: | matt.scorgie [ Mon Feb 13, 2012 3:51 pm ] |
| Post subject: | Re: Tube tray |
Yeah mate this is my car, Obsiviously it hasent got much wheel base. I just got the car not long ago, spending a bit of money on it this is only the start. I have 10k to spend just going to take A bit of time. My plans are Getting a set of km2's or something decent, wheel spacers, bead lockers ,front air locker ,new front bar ,a bit of exo cage, and have alreddy bought a internal roll cage. Getting (fatzook) to also put custom sliders on it, And getting ruf installed so this is only The beginning stages of it. Sorry its not much just yet but it all takes time guys lol.. |
|
| Author: | matt.scorgie [ Mon Feb 13, 2012 3:56 pm ] |
| Post subject: | Re: Tube tray |
oh and y has everyone got a monkey as there dp lol |
|
| Author: | matt.scorgie [ Mon Feb 13, 2012 4:01 pm ] |
| Post subject: | Re: Tube tray |
Well steve sorry, iI think that's ya name bad with names (fatzook) I think it looks great. Nice work and I think all this fellas work is very neat nice and A highly recommended guy to go to. This guy put's the extra effort into his work not like some people I have went to in the past. He is very honest and give's updates every few days on his progress, even sends pics if you need Any way steve good job mate keep up the good work cause I will deffently be comming back after i pick her up.. |
|
| Author: | atari4x4 [ Mon Feb 13, 2012 4:08 pm ] |
| Post subject: | Re: Tube tray |
Fatzook + TSOR = Pete The reason behind the primate display pics is unknown. 
|
|
| Author: | matt.scorgie [ Mon Feb 13, 2012 4:11 pm ] |
| Post subject: | Re: Tube tray |
well i kinda get the promate 1 for fat zook he is like 6ft5 or somethink and built lol like a ape lol |
|
| Author: | just_cruizin [ Mon Feb 13, 2012 4:24 pm ] |
| Post subject: | Re: Tube tray |
And remarks like that may be reflected in his invoice for your tray. You're meant to say he's a great bloke not that resembles a gorilla no matter how close to the truth that is. One poor weedy "Aussie" cap wearing shit is thinking that way now anyways |
|
| Author: | Fatzook [ Mon Feb 13, 2012 5:08 pm ] |
| Post subject: | Re: Tube tray |
This thread is halarious 
|
|
| Author: | matt.scorgie [ Mon Feb 13, 2012 5:50 pm ] |
| Post subject: | Re: Tube tray |
naa just ment he is a big built fella not a gorilla lol but ok gorillas are build like brick shit houses that all i ment |
|
| Author: | Zook_Fan [ Mon Feb 13, 2012 5:55 pm ] |
| Post subject: | Re: Tube tray |
Anyway... Where are the finished pics?? |
|
| Author: | Fatzook [ Mon Feb 13, 2012 5:58 pm ] |
| Post subject: | Re: Tube tray |
Zook_Fan wrote: Anyway... Where are the finished pics?? Won't be finished till wednesday now. Gotta work a dog cage into it somewhere and chop chop the ally deck plates. Some of the bendy bits around the tray perimeter were doing my head in! 
|
|
| Author: | matt.scorgie [ Mon Feb 13, 2012 6:00 pm ] |
| Post subject: | Re: Tube tray |
yeah sorry pete i thrort it was steve |
|
| Author: | Fatzook [ Mon Feb 13, 2012 6:08 pm ] |
| Post subject: | Re: Tube tray |
matt.scorgie wrote: yeah sorry pete i thrort it was steve I've been called worse. In this thread no less 
|
|
| Author: | Rusho [ Mon Feb 13, 2012 7:05 pm ] |
| Post subject: | Re: Tube tray |
Steve...the 6ft 5' gorilla 
|
|
| Author: | jimbo_jones [ Mon Feb 13, 2012 8:22 pm ] |
| Post subject: | Re: Tube tray |
nice work ape man
|
|
| Author: | monley [ Mon Feb 13, 2012 8:44 pm ] |
| Post subject: | Re: Tube tray |
Tray looks good Fatape...
|
|
| Author: | atari4x4 [ Mon Feb 13, 2012 8:45 pm ] |
| Post subject: | Re: Tube tray |
fabbed by apezook 
|
|
| Author: | BlueSuzy [ Mon Feb 13, 2012 10:40 pm ] |
| Post subject: | Re: Tube tray |
Nice 
|
|
| Author: | matt.scorgie [ Tue Feb 14, 2012 10:21 am ] |
| Post subject: | Re: Tube tray |
yeah pete wheres the updates lol |
|
| Author: | GRPABT1 [ Tue Feb 14, 2012 12:17 pm ] |
| Post subject: | Re: Tube tray |
Shouldn't there be plates where the tube is welded to the chassis? |
|
| Author: | Fatzook [ Tue Feb 14, 2012 12:37 pm ] |
| Post subject: | Re: Tube tray |
GRPABT1 wrote: Shouldn't there be plates where the tube is welded to the chassis? Yeah I always tack to the frame, build the tray/ cage etc, then after everything is braced and welded, just un pick the tacks and weld some mounts on in the correct position. This tray is removable, so it won't be welded to the frame. |
|
| Author: | Mattmorgo [ Sat Feb 18, 2012 5:33 pm ] |
| Post subject: | Re: Tube tray |
Finished yet?? |
|
| Author: | Fatzook [ Sat Feb 18, 2012 10:15 pm ] |
| Post subject: | Re: Tube tray |
Mattmorgo wrote: Finished yet?? Yeah. Finishing touches. Although Matt has extended the to-do list, so there is another few days work to do now. Front and rear chassis extensions, RUF, long travel rear, Wheelbase extension :armsup: transfer gears, custom winch bar, and maybe CRMO front end. |
|
| Author: | 31zook [ Sun Feb 19, 2012 3:46 am ] |
| Post subject: | Re: Tube tray |
 Can't wait to see some updates. |
|
| Author: | Daves4wd [ Sun Feb 19, 2012 4:09 pm ] |
| Post subject: | Re: Tube tray |
Looks the goods can't wait to see it finished why can't you live in melb?? I need stuff done to mine hahah |
|
| Author: | Fatzook [ Sun Feb 19, 2012 6:03 pm ] |
| Post subject: | Re: Tube tray |
Daves4wd wrote: Looks the goods can't wait to see it finished why can't you live in melb?? I need stuff done to mine hahah Road trip?
|
|
| Page 1 of 4 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|