Sand blasted rim, with the back ring in place. Weld prep for 8mm fillet weld.
Done. By hand
| auszookers.com https://auszookers.com/forum/ |
|
| Beadlocks https://auszookers.com/forum/viewtopic.php?f=14&t=34277 |
Page 1 of 2 |
| Author: | Fatzook [ Wed Jul 18, 2012 3:43 pm ] |
| Post subject: | Beadlocks |
Sand blasted rim, with the back ring in place. Weld prep for 8mm fillet weld. Done. By hand
|
|
| Author: | got_bar_work [ Wed Jul 18, 2012 4:56 pm ] |
| Post subject: | Re: Beadlocks |
I wish i could weld even half as good as you That looks so good How do u keep such a stedy hand I shake all over the placelike im drunk |
|
| Author: | Fatzook [ Wed Jul 18, 2012 5:03 pm ] |
| Post subject: | Re: Beadlocks |
Practice. A set of 5 15" wheels has 6 linear metres of weld. I did 2 sets today, amongst other jobs. My hands and arms are quite sore now. 
|
|
| Author: | ball [ Wed Jul 18, 2012 5:05 pm ] |
| Post subject: | Re: Beadlocks |
Fatzook wrote: Practice. A set of 5 15" wheels has 6 linear metres of weld. I did 2 sets today, amongst other jobs. My hands and arms are quite sore now. need a rotator then |
|
| Author: | Fatzook [ Wed Jul 18, 2012 5:10 pm ] |
| Post subject: | Re: Beadlocks |
ball wrote: Fatzook wrote: Practice. A set of 5 15" wheels has 6 linear metres of weld. I did 2 sets today, amongst other jobs. My hands and arms are quite sore now. need a rotator then I know. I seem to be doing more of these, so I may invest in one soon. |
|
| Author: | Rusho [ Wed Jul 18, 2012 5:40 pm ] |
| Post subject: | Re: Beadlocks |
Not bad I guess 
|
|
| Author: | atari4x4 [ Wed Jul 18, 2012 5:42 pm ] |
| Post subject: | Re: Beadlocks |
looks photochoped 
|
|
| Author: | zooky08 [ Wed Jul 18, 2012 5:54 pm ] |
| Post subject: | Re: Beadlocks |
Good prep work makes life so much easier. Looking good Pete. |
|
| Author: | appsie [ Wed Jul 18, 2012 6:27 pm ] |
| Post subject: | Re: Beadlocks |
not bad for a beginner |
|
| Author: | DarkHorse [ Wed Jul 18, 2012 6:31 pm ] |
| Post subject: | Re: Beadlocks |
You make me sick. |
|
| Author: | just_cruizin [ Wed Jul 18, 2012 6:38 pm ] |
| Post subject: | Re: Beadlocks |
Butcher a nt diff and weld the tube to your bench with an axle in it |
|
| Author: | bigrig91 [ Wed Jul 18, 2012 6:47 pm ] |
| Post subject: | Re: Beadlocks |
Seen these in the flesh today, looked shit as so must be photochopped... hahah just kidding. Pure perfection as always. Homo. |
|
| Author: | Fatzook [ Wed Jul 18, 2012 6:53 pm ] |
| Post subject: | Re: Beadlocks |
just_cruizin wrote: Butcher a nt diff and weld the tube to your bench with an axle in it yeah I have a lazy suzan in the pipeline for my new jigging bench. i just need to sort out the elec motor and adjustable speed controller. |
|
| Author: | douglasgiersch [ Wed Jul 18, 2012 8:17 pm ] |
| Post subject: | Re: Beadlocks |
If you could pick up an old heavyish duty sewing machine/table Pete (the old belt driven type) you could easily flip the motor striaght up with the nt housing sticking up out of the table with probly the short side axle sticking out under the table and with correct size pully for the motor/axle could get the required speed, also with the old table style ones you would get a large foot adjustable throttle. And wouldnt have to do any cabeling  Mums got a few clogging up my shed area would kick em your way abit if you werent so far away haha. Just an idea probly have one already thought out with dimple die legs and lots of fancy fabrication bits on it but worth a try.Doug |
|
| Author: | Fatzook [ Wed Jul 18, 2012 8:20 pm ] |
| Post subject: | Re: Beadlocks |
DarkHorse wrote: You make me sick. hahahaha. That WAS the desired outcome
|
|
| Author: | monley [ Wed Jul 18, 2012 8:48 pm ] |
| Post subject: | Re: Beadlocks |
That's some terrible welding Pete ...i thought you were good   Top Stuff mate! 
|
|
| Author: | DarkHorse [ Wed Jul 18, 2012 11:19 pm ] |
| Post subject: | Re: Beadlocks |
Fatzook wrote: DarkHorse wrote: You make me sick. hahahaha. That WAS the desired outcome Damn you and your freakish abilities. When are you making me some 16s?
|
|
| Author: | Fatzook [ Wed Jul 18, 2012 11:43 pm ] |
| Post subject: | Re: Beadlocks |
DarkHorse wrote: Fatzook wrote: DarkHorse wrote: You make me sick. hahahaha. That WAS the desired outcome Damn you and your freakish abilities. When are you making me some 16s? 16's are for jimny drivers. You want 17's I'm thinking about flipping my 16" sunnies to a decent neg offset (-25 maybe? ) and chucking some beadlocks on them. They will clear 2L brakes. |
|
| Author: | tanshi [ Thu Jul 19, 2012 7:56 am ] |
| Post subject: | Re: Beadlocks |
How much Pete? The old man needs some rock rings welded to his 15 by 8s |
|
| Author: | Fatzook [ Thu Jul 19, 2012 1:10 pm ] |
| Post subject: | Re: Beadlocks |
tanshi wrote: How much Pete? The old man needs some rock rings welded to his 15 by 8s Like these?  
|
|
| Author: | tanshi [ Thu Jul 19, 2012 1:18 pm ] |
| Post subject: | Re: Beadlocks |
Exactly. But without the pink 
|
|
| Author: | Fatzook [ Thu Jul 19, 2012 1:40 pm ] |
| Post subject: | Re: Beadlocks |
I'm assured that its purple.
|
|
| Author: | just_cruizin [ Thu Jul 19, 2012 6:07 pm ] |
| Post subject: | Re: Beadlocks |
Looks more lavender |
|
| Author: | Rusho [ Thu Jul 19, 2012 6:13 pm ] |
| Post subject: | Re: Beadlocks |
just_cruizin wrote: Looks more lavender Matches his nail polish 
|
|
| Author: | Scrawny [ Thu Jul 19, 2012 6:33 pm ] |
| Post subject: | Re: Beadlocks |
Rusho wrote: just_cruizin wrote: Looks more lavender Matches his nail polish Yours? Or his? I'd say it's closer to the colour you wear |
|
| Author: | Bruce [ Thu Jul 19, 2012 6:36 pm ] |
| Post subject: | Re: Beadlocks |
Least I have the Balls to paint it that colour. Come wheel with me Rusho ya girl. ooohhhhhh that's right ya drive a coily. I'd need to stay on flat tracks. |
|
| Author: | Rusho [ Thu Jul 19, 2012 6:43 pm ] |
| Post subject: | Re: Beadlocks |
Bruce wrote: Least I have the Balls to paint it that colour. Come wheel with me Rusho ya girl. ooohhhhhh that's right ya drive a coily. I'd need to stay on flat tracks. When I have done as much work as you have I'll come for a drive. Hell, I'll even paint my rims pink. That way you'll get your ass handed to you by a coily with pink rims  
|
|
| Author: | just_cruizin [ Thu Jul 19, 2012 6:58 pm ] |
| Post subject: | Re: Beadlocks |
Bruce only have RUF, spring and bodylift. No custom link setup with reinforced diffs. Casper is actually the same as 90% of sierras on here, except it just works. And has 2 guys who know it. |
|
| Author: | ball [ Thu Jul 19, 2012 6:59 pm ] |
| Post subject: | Re: Beadlocks |
just_cruizin wrote: Looks more lavender Looks like Australian standard P12 purple to me
|
|
| Author: | Bruce [ Thu Jul 19, 2012 7:04 pm ] |
| Post subject: | Re: Beadlocks |
ball wrote: just_cruizin wrote: Looks more lavender Looks like Australian standard P12 purple to me No don't think it was P12. It was Plain Violet rattle can. V13 I think Ball. |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|