Hey mate sliders look good, I made a set for my girlfriends coily, mounts were similar, 10mm plate around the chassi, box design with tube outers bent on the jd2
| auszookers.com https://www.auszookers.com/forum/ |
|
| Coily Chassis Mount Sliders https://www.auszookers.com/forum/viewtopic.php?f=14&t=35657 |
Page 1 of 1 |
| Author: | Dec [ Tue Sep 11, 2012 7:37 pm ] |
| Post subject: | Coily Chassis Mount Sliders |
G'day, thought I'd show you my sliders that i made for my coily. I followed a design off Low Range then added my own mountings. My plan was to keep them nice and simple and follow the lines of my flares. |
|
| Author: | nicko [ Tue Sep 11, 2012 8:01 pm ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
Hey mate sliders look good, I made a set for my girlfriends coily, mounts were similar, 10mm plate around the chassi, box design with tube outers bent on the jd2
|
|
| Author: | nicko [ Tue Sep 11, 2012 8:04 pm ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
One thing I would recommend is a gusset from the chassi mount down onto your outriggers like this 
|
|
| Author: | nicko [ Tue Sep 11, 2012 8:12 pm ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
One thing I would recommend is a gusset from the chassi mount down onto your outriggers like this
|
|
| Author: | Dec [ Tue Sep 11, 2012 8:22 pm ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
Nice man they're awesome! Rather good idea I'll have to make time this weekend to add them on. I tell you what i had a hell of a time trying to measure them correctly with the chassis all different. |
|
| Author: | want33s [ Fri Sep 28, 2012 9:03 pm ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
Not bad but why are they so low? |
|
| Author: | got_bar_work [ Sat Sep 29, 2012 7:20 am ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
Get rid of the sill plastic it traps shit and the sills rust out pretty quick And its like welding a tin can to replace them |
|
| Author: | Dec [ Wed Oct 17, 2012 7:11 pm ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
[quote="want33s"]Not bad but why are they so low? Rather late response, my design was to make them to project the car obviously but also my flares which is why i have them rather low, however i've yet to have a chance to test them so if they do restrict me I'll have to think again. |
|
| Author: | Dec [ Wed Oct 17, 2012 7:13 pm ] |
| Post subject: | Re: Coily Chassis Mount Sliders |
got_bar_work wrote: Get rid of the sill plastic it traps shit and the sills rust out pretty quick And its like welding a tin can to replace them I completely agree terrible design there, it's been on the list for some time now I'll be getting onto when i get her back. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|