that was a prop just for the photo. I thought it would be irrisponsible to associate alcohol with driving
| auszookers.com https://www.auszookers.com/forum/ |
|
| steve's dodgy drink holders https://www.auszookers.com/forum/viewtopic.php?f=14&t=3632 |
Page 1 of 1 |
| Author: | steve [ Wed Dec 24, 2008 7:21 pm ] |
| Post subject: | steve's dodgy drink holders |
I just finished manufacturing and installing some drink holders in my vehicle. I used Geniune Bundy Rum drink coolers, the Ned Kelly type ones that are probably made in China, and secured them with high quality Tek screws, probably made in China also. The design and installation of these drink coolers is perfect for those rough type tracks where your drink needs to be held firmly in place. I can make some more if people are interested and post them out for maybe $100 each. |
|
| Author: | BlueSuzy [ Wed Dec 24, 2008 9:06 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
So you use Genuine Bundy Cooler Holders. But you drink whoosy arse Golden Circle??wtf.pls explain. |
|
| Author: | steve [ Wed Dec 24, 2008 9:10 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
that was a prop just for the photo. I thought it would be irrisponsible to associate alcohol with driving
|
|
| Author: | BlueSuzy [ Wed Dec 24, 2008 9:16 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
Does the "mans energy drink " fit? " "Mother" |
|
| Author: | Scrawny [ Wed Dec 24, 2008 9:25 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
You have way too much time on your hands Steve!! Shouldn't you be packing or something? |
|
| Author: | steve [ Wed Dec 24, 2008 9:33 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
no time to pack... i have some rum cans in the freezer cooling. Just opened one 
|
|
| Author: | lump_a_charcoal [ Wed Dec 24, 2008 9:36 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
Where is your handbrake? |
|
| Author: | BlueSuzy [ Wed Dec 24, 2008 9:43 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
In camo as a extinguisher. 
I dont use my handbrake...Thats what gears are for.. |
|
| Author: | steve [ Wed Dec 24, 2008 9:50 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
i ws waiting for someone to notice that. Because the handbrake cables are located behind the diff, running parallel with the diff, they tend to get mashed up on rocks, so that's what happened to mine, so i gave up on having a handbrake. I just park with it in gear, or if it's on a hill of any kind, i park against a tree just in case. |
|
| Author: | Built4thrashing [ Thu Dec 25, 2008 2:46 am ] |
| Post subject: | Re: steve's dodgy drink holders |
you go parking in yourz???? Didnt thinnk there would be enough room in a sierra for that type of thing |
|
| Author: | steve [ Thu Dec 25, 2008 2:48 am ] |
| Post subject: | Re: steve's dodgy drink holders |
barely enough room in a hilux 
|
|
| Author: | Damo [ Thu Dec 25, 2008 2:56 am ] |
| Post subject: | Re: steve's dodgy drink holders |
steve wrote: barely enough room in a hilux
Which is why you bought a cruiser right Steve? 
|
|
| Author: | steve [ Thu Dec 25, 2008 3:14 am ] |
| Post subject: | Re: steve's dodgy drink holders |
i'm not sure where you're going with that 
|
|
| Author: | just_cruizin [ Thu Dec 25, 2008 3:38 am ] |
| Post subject: | Re: steve's dodgy drink holders |
This would have been a better application for your sika, save a tek screw |
|
| Author: | jimbo_jones [ Thu Dec 25, 2008 4:44 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
nice custom job I'll take 2 |
|
| Author: | TZAR [ Thu Dec 25, 2008 6:17 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
if you want a handbrake steve you should go the hydralic version Use these part numbers for the right size one PBR P5060 = 5/8" PBR P4872 = 3/4" 
Then you can booty fab up a bracket like this to suit, split your rear line and then you have a hand brake 
Don't look at the price as $350 as it should only cost about $35 for amaster cylinder. get Royce to chase down a price for you. you could always mount it on the rear wall too vertically so that you drink holders are more accesable |
|
| Author: | andrewa [ Thu Dec 25, 2008 11:13 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
youré a ideas man steve.
|
|
| Author: | lump_a_charcoal [ Thu Dec 25, 2008 11:43 pm ] |
| Post subject: | Re: steve's dodgy drink holders |
Hydraulic Hbrakes aren't legal for NSW I believe, however rules may have changed... Dunno about QLD. |
|
| Author: | royce [ Fri Dec 26, 2008 12:49 am ] |
| Post subject: | Re: steve's dodgy drink holders |
they arent legal anywhwere but they work good thanks for the numbers Jock, I was about to start chasing down bits for the mini |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|