Coils, shocks, control arms, bushes, brackets, hubs, drums and brakes all in a kit ready to go for $1700
http://www.huntsmanproducts.com.au/inde ... ion-1.html
| auszookers.com https://www.auszookers.com/forum/ |
|
| new design off road trailer https://www.auszookers.com/forum/viewtopic.php?f=14&t=41050 |
Page 1 of 1 |
| Author: | harry loane [ Wed May 22, 2013 9:59 pm ] |
| Post subject: | new design off road trailer |
hey guys i just thought i would share this with you. me and a friend have been working on this off road trailer for a little while it a new idea using a independent suspension system. we are currently designing a camper set up to fit the trailer |
|
| Author: | Fatzook [ Wed May 22, 2013 10:44 pm ] |
| Post subject: | Re: new design off road trailer |
What stops the axle from swinging sideways? Independant suspension on a trailer is not new, but they always have 2 points of contact with the chassis. Same as any A-arm or wishbone found on any other type of independant suspension. EDIT: It COULD work if you used a large enough member for the single swing arm..... like 200x50 with a 200mm 'hinge' at the chassis, but that will be quite weighty. |
|
| Author: | Gwagensteve [ Thu May 23, 2013 8:03 am ] |
| Post subject: | Re: new design off road trailer |
X2 Have a look at the suspension design used by track for their campers. Very elegant, and has some quite advanced wheel path design to prevent trailer sway. They moved away from a simple swing arm many years ago. Steve. |
|
| Author: | want33s [ Thu May 23, 2013 9:00 am ] |
| Post subject: | Re: new design off road trailer |
Coils, shocks, control arms, bushes, brackets, hubs, drums and brakes all in a kit ready to go for $1700 http://www.huntsmanproducts.com.au/inde ... ion-1.html
|
|
| Author: | missmyljdaze [ Thu May 23, 2013 11:46 am ] |
| Post subject: | Re: new design off road trailer |
Might be a good idea to chat to Ball, He has the privelige of repairing caravan and trailer suspension and stuff after they cark it due to NT tracks and roads. Ball should have a few pointers on what works and survives in the real world. stephen |
|
| Author: | SierraDan [ Mon May 27, 2013 6:43 pm ] |
| Post subject: | Re: new design off road trailer |
|
|
| Author: | Gwagensteve [ Mon May 27, 2013 7:18 pm ] |
| Post subject: | Re: new design off road trailer |
I hate all those RHS swing arm designs- they just look so agricultural. Google "track mc2 suspension" The engineer at track trailer is a land rover guy and based the mc2 suspension on range rover parts- spring, shock and radius arm, and bushes. It could be very easily replicated with cheap wrecker parts from an old range rover and will outperform a swing arm design by a whole lot and be no harder to build. Steve. |
|
| Author: | SierraDan [ Mon May 27, 2013 7:22 pm ] |
| Post subject: | Re: new design off road trailer |
The Tvan is my favourite trailer. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|