| auszookers.com https://auszookers.com/forum/ |
|
| Jimny- Custom rear bar https://auszookers.com/forum/viewtopic.php?f=14&t=43255 |
Page 1 of 1 |
| Author: | kyzermattingley [ Wed Oct 02, 2013 11:42 pm ] |
| Post subject: | Jimny- Custom rear bar |
Got booked for no rear bar, no mud flaps and no mod plate for lift, was good motivation to get some jobs done. A few days a plying around came up with this,    Still need to trim where the mud flap attach and weld it to my tow bar in a few strong spots, then powder coat. All in all pretty stoked on how it came out. I'll put up some more photos when it's back from the powder coaters. Kyzer |
|
| Author: | hooki [ Thu Oct 03, 2013 3:25 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Like all your other work on the jimny, very nice mate 
|
|
| Author: | Skippy [ Thu Oct 03, 2013 6:13 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Similar design to the jap ones I found on the net except they are fibreglass. Looks great, doesn't stick out like dogs balls around the sides. What are you doing for the lights? |
|
| Author: | shep [ Thu Oct 03, 2013 6:19 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Looks great, well done |
|
| Author: | JayKay [ Thu Oct 03, 2013 9:08 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Great work, I love it. |
|
| Author: | kyzermattingley [ Thu Oct 03, 2013 10:06 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Skippy wrote: Similar design to the jap ones I found on the net except they are fibreglass. Looks great, doesn't stick out like dogs balls around the sides. What are you doing for the lights? All my lights are wired up to the upper tail lights. I did this a while ago, I only needed to add an Orange bulb in beside the reverse bulb and wired it up to the indicators and file out the blanked off hole for the brake light bulb. From memory there is power/wiring for the brake light already in each rear quarter panel, I think the only wire I had to run was for the drivers side indicator which I ran from the passengers side through the hollow Chanel at the rear of the boot to the other side. The rest of the wiring loom down below became my trailer plug harness, works a treat, I've done a few of my mates the same way since. If anyone's interested in the tail light mod I'll take photos and explain it better. Kyzer |
|
| Author: | Skippy [ Fri Oct 04, 2013 5:04 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
 definitely put it up
|
|
| Author: | alien [ Sun Oct 06, 2013 12:33 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
probably one of the best looking jimny rear bars i've seen! |
|
| Author: | 055ETH [ Sun Oct 06, 2013 12:51 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
auszoku represent. 
|
|
| Author: | macguyverjimny [ Sun Oct 06, 2013 10:39 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
kyzermattingley wrote: Skippy wrote: Similar design to the jap ones I found on the net except they are fibreglass. Looks great, doesn't stick out like dogs balls around the sides. What are you doing for the lights? All my lights are wired up to the upper tail lights. I did this a while ago, I only needed to add an Orange bulb in beside the reverse bulb and wired it up to the indicators and file out the blanked off hole for the brake light bulb. From memory there is power/wiring for the brake light already in each rear quarter panel, I think the only wire I had to run was for the drivers side indicator which I ran from the passengers side through the hollow Chanel at the rear of the boot to the other side. The rest of the wiring loom down below became my trailer plug harness, works a treat, I've done a few of my mates the same way since. If anyone's interested in the tail light mod I'll take photos and explain it better. Kyzer Can you explain with some photos the tail light mod if possible, I would like to do this mod too, Thank you, Lovely design btw love it
|
|
| Author: | kyzermattingley [ Tue Oct 08, 2013 9:20 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Im trying to talk a mate into doing the mod and making front and rear bumpers, if he gives me the go ahead ill photograph everything and put it up, otherwise ill pull my lights and take photos Kyzer |
|
| Author: | macguyverjimny [ Wed Oct 09, 2013 1:00 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Thank you Please keep me informed would be much appreciated
|
|
| Author: | kyzermattingley [ Wed Oct 09, 2013 8:39 am ] |
| Post subject: | Re: Jimny- Custom rear bar |
Is there someone who would like their car done, must live in Brisbane QLD, ill do it and take photos, will cost $30 for the number plate mount Kyzer |
|
| Author: | rockcrawlerdude [ Wed Oct 09, 2013 4:36 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
kyzermattingley wrote: Is there someone who would like their car done, must live in Brisbane QLD, ill do it and take photos, will cost $30 for the number plate mount Kyzer Do one for a LWB Sierra? |
|
| Author: | kyzermattingley [ Wed Oct 09, 2013 5:09 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
rockcrawlerdude wrote: kyzermattingley wrote: Is there someone who would like their car done, must live in Brisbane QLD, ill do it and take photos, will cost $30 for the number plate mount Kyzer Do one for a LWB Sierra? I've never played with a LWB sierra, just looking to do another Jimny if someone wants theirs done Kyzer |
|
| Author: | rockcrawlerdude [ Wed Oct 09, 2013 5:34 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
Haha it was worth a try. That bar is mint by the way. |
|
| Author: | zukenutter [ Fri Oct 18, 2013 7:15 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
alien wrote: probably one of the best looking jimny rear bars i've seen! Best for sure, the sides fit so well and the round corners suit the Jimny so much better that sharp corners. Nice job with the bar, and great use of the redundant light harness. |
|
| Author: | Joel Towart [ Mon Dec 09, 2013 3:16 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
where'd the pics go? I WANNA SEEEEEEEEE *throws tantrum* |
|
| Author: | zammit [ Fri Jan 17, 2014 1:35 pm ] |
| Post subject: | Re: Jimny- Custom rear bar |
can you re post the pics THEY HAVE BEEN DELETED AND THIS MAKES ME SAD 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|