Problem: Stock wide track flare is to short for vert lift opening
Solution: added 70mm of another flare into the center of it
| auszookers.com https://auszookers.com/forum/ |
|
| wt vert lift flares https://auszookers.com/forum/viewtopic.php?f=14&t=48273 |
Page 1 of 1 |
| Author: | pezz [ Wed Oct 29, 2014 1:22 pm ] |
| Post subject: | wt vert lift flares |
Problem: Stock wide track flare is to short for vert lift opening Solution: added 70mm of another flare into the center of it
|
|
| Author: | monley [ Wed Oct 29, 2014 8:15 pm ] |
| Post subject: | Re: wt vert lift flares |
Good job Pezz! Would of been a nice fiddley job |
|
| Author: | greenzook89 [ Thu Oct 30, 2014 5:18 pm ] |
| Post subject: | Re: wt vert lift flares |
Nice. Any pics of the process? |
|
| Author: | DMAC [ Fri Oct 31, 2014 7:20 am ] |
| Post subject: | Re: wt vert lift flares |
I've been waiting for the Pezz fab.  Nice solution to keeping things looking stock. |
|
| Author: | pezz [ Fri Oct 31, 2014 6:02 pm ] |
| Post subject: | Re: wt vert lift flares |
Thanks guys, ive only done the one for far, will post up some process pic's as I do the other three, will be sculpting the flares to suit the blinkers and fuel filler also. |
|
| Author: | jono165 [ Fri Oct 31, 2014 9:48 pm ] |
| Post subject: | Re: wt vert lift flares |
I like it! Definitely one of the better solutions I've seen. It's so hard to get flares that look ok on sierras. |
|
| Author: | pezz [ Wed Nov 05, 2014 4:51 pm ] |
| Post subject: | Re: wt vert lift flares |
Front flare done, 60mm extention and cut out to suit blinker 
|
|
| Author: | prickle [ Wed Nov 05, 2014 5:08 pm ] |
| Post subject: | Re: wt vert lift flares |
pezz wrote: Front flare done, 60mm extention and cut out to suit blinker Hi Pezz Any chance of a front on shot ... tyre / flare Stuart ............. Samsung S4 |
|
| Author: | pezz [ Wed Nov 05, 2014 5:57 pm ] |
| Post subject: | Re: wt vert lift flares |
Will take one tomorrow, its just a stock width wt flare tho.. |
|
| Author: | buzbox [ Wed Nov 05, 2014 6:35 pm ] |
| Post subject: | Re: wt vert lift flares |
Nice work, I was going to do this but call me lazy, It's too much work for little gain. I just tilted it towards the front a bit more. 
|
|
| Author: | pezz [ Wed Nov 05, 2014 7:52 pm ] |
| Post subject: | Re: wt vert lift flares |
I recon yours looks neater, with the front endge all the way down and not sitting as high |
|
| Author: | buzbox [ Wed Nov 05, 2014 8:41 pm ] |
| Post subject: | Re: wt vert lift flares |
Yours is very seamless and you've done a good job of it, i just took the easier option. |
|
| Author: | pezz [ Thu Nov 06, 2014 8:41 am ] |
| Post subject: | Re: wt vert lift flares |
   flares are yet to be bolted on, they are just stilling on the mounts, still need to make up some inner trims to fill the void between the flare and the body Tyre position will change as I've yet to bolt up my wt diffs, currently 15x8 rim with neg offset, but will be going to a narrower rim with possitive offset to keep it skinny |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|