Sent from my iPhone using Tapatalk Pro
| auszookers.com https://www.auszookers.com/forum/ |
|
| Kyphonii fabrication JIMNY https://www.auszookers.com/forum/viewtopic.php?f=14&t=56028 |
Page 1 of 1 |
| Author: | KYPHONII [ Sun Sep 08, 2019 8:42 pm ] |
| Post subject: | Kyphonii fabrication JIMNY |
Started on a aluminium front bumper. Not a lot to bolt too. |
|
| Author: | KYPHONII [ Sun Sep 08, 2019 8:43 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Sun Sep 08, 2019 8:43 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Sun Sep 08, 2019 8:45 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Mon Sep 09, 2019 6:43 am ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Mon Sep 09, 2019 6:43 am ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Mon Sep 09, 2019 6:43 am ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Mon Sep 09, 2019 6:44 am ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | pete_79 [ Mon Sep 09, 2019 11:59 am ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
Very neat work. Looks great. |
|
| Author: | sideways [ Mon Sep 09, 2019 12:47 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
X2 impressive! |
|
| Author: | KYPHONII [ Mon Sep 09, 2019 3:47 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Interesting how little difference there is between the JEEP and the suzuki Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Mon Sep 09, 2019 3:47 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | KYPHONII [ Mon Sep 09, 2019 3:50 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
 Sent from my iPhone using Tapatalk Pro |
|
| Author: | zook ute [ Wed Sep 11, 2019 7:23 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
Very nice work, any other plans for it? |
|
| Author: | KYPHONII [ Sat Sep 14, 2019 6:24 pm ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
Fitting a large transmission cooler at the moment. 255mmx285mm x19 Thinking of a extra fuel tank, 60 litres? Protection from front to back. Tweaking the auxiliary 120 amp hour battery install , Sent from my iPhone using Tapatalk Pro |
|
| Author: | Spokerider [ Mon Sep 30, 2019 12:31 am ] |
| Post subject: | Re: Kyphonii fabrication JIMNY |
Nice work! What does it weigh? I'm guessing 1/2 or less than the same bumper made from steel. I have plans to replace my steel bumpers with aluminum. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|