| auszookers.com https://auszookers.com/forum/ |
|
| how to remove broken bolts part 1 https://auszookers.com/forum/viewtopic.php?f=17&t=4856 |
Page 1 of 2 |
| Author: | shep [ Fri May 15, 2009 9:37 pm ] |
| Post subject: | how to remove broken bolts part 1 |
how to remove broken bolts part 1 or secret fitter trick #1 broken bolt on flywheel 
place big washer on top of broken bolt 
weld broken bolt to washer 
use a pair of vice grips and unscrew broken bolt. weld a nut to the washer and use a spanner if it is really stuck. 
you beauty 
|
|
| Author: | atari4x4 [ Fri May 15, 2009 9:52 pm ] |
| Post subject: | Re: how to remove broken bolts part 1 |
nice work, it's good to see no chainsaw was involved in the removal! |
|
| Author: | Scrawny [ Fri May 15, 2009 10:23 pm ] |
| Post subject: | Re: how to remove broken bolts part 1 |
And hammers!!!! Where's the hammers??!! I guess welding was inovlved 
|
|
| Author: | shep [ Fri May 15, 2009 10:47 pm ] |
| Post subject: | Re: how to remove broken bolts part 1 |
atari4x4 wrote: nice work, it's good to see no chainsaw was involved in the removal! ScrawnC wrote: And hammers!!!! Where's the hammers??!! I guess welding was inovlved
that's because i didn't do it, ball wont fix my stuff ups if i have a go first 
|
|
| Author: | ball [ Sat May 16, 2009 1:03 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Oi, Stop giving away my secret fitter tricks ya bastard 
|
|
| Author: | royce [ Sat May 16, 2009 1:08 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
hehe I thought it was a bit hard to believe somebody that could snap a pressure plate bolt could weld so neat 
|
|
| Author: | ball [ Sat May 16, 2009 1:30 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
I couldn't let him loose with the mig or he would end up welding the bolt and washer to the flywheel. At least he is learning not to butcher his bodgys before throwing them at me 
|
|
| Author: | shep [ Sat May 16, 2009 1:35 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
i walk into ball's work and all he says to me is what have you broken now. 
|
|
| Author: | shep [ Sat May 16, 2009 1:36 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
royce wrote: hehe I thought it was a bit hard to believe somebody that could snap a pressure plate bolt could weld so neat
i bought a new air ratchet and it has a bit more go then my old one.
|
|
| Author: | Scrawny [ Sat May 16, 2009 1:42 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Every one needs a friend like Ball!! |
|
| Author: | shep [ Sat May 16, 2009 1:46 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
ScrawnC wrote: Every one needs a friend like Ball!!
ball would rather stuff around with shit then actually do any work. only human i suppose. 
|
|
| Author: | Scrawny [ Sat May 16, 2009 1:47 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Sounds like me
I was cleaning up my sliders at work today... |
|
| Author: | ball [ Sat May 16, 2009 1:49 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Quick check this out before they delete it http://en.wikipedia.org/wiki/Shepped |
|
| Author: | Scrawny [ Sat May 16, 2009 1:53 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
|
Hahahahhhhaaahhha Damn 'a' button keeps sticking, too much coke 
|
|
| Author: | ball [ Sat May 16, 2009 1:54 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Everyone feel free to add as required
|
|
| Author: | shep [ Sat May 16, 2009 1:58 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
i cant deny it, i am good at breaking stuff. my first car was a hilux and i broke it in half.
|
|
| Author: | ball [ Sat May 16, 2009 2:14 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Let's see if the page stays up for the night
Wikipedia keeps sending me nasty messages asking me to stop cluttering up wiki with useless information. I tried to tell them it was informative but I don't think they are going to believe me 
|
|
| Author: | Scrawny [ Sat May 16, 2009 2:16 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Nice one Ball!!! I thought Toyota Hilux's were unbreakable??!! Obviously not Shep proof
|
|
| Author: | ball [ Sat May 16, 2009 2:17 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
|
|
|
| Author: | ball [ Sat May 16, 2009 2:24 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Please stop removing speedy deletion notices from pages that you have created yourself, as you did with Shepped. If you continue, you will be blocked from editing Wikipedia. Ridernyc (talk) 11:35, 15 May 2009 (UTC) This is the only warning you will receive for your disruptive edits. If you vandalize Wikipedia again, you will be blocked from editing. Ridernyc (talk) 11:37, 15 May 2009 (UTC) I don't think it is going to last long, can someone else log in and add something
|
|
| Author: | Scrawny [ Sat May 16, 2009 2:30 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
hahahahahahahahahahahahaha!!!!!!!! |
|
| Author: | ball [ Sat May 16, 2009 2:38 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
Gone 
They don't mess around over there. Lucky I have it copied for re-posting at a later date
|
|
| Author: | Mike [ Sat May 16, 2009 2:38 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
its gone now |
|
| Author: | shep [ Sat May 16, 2009 3:44 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
ScrawnC wrote: Nice one Ball!!!
I thought Toyota Hilux's were unbreakable??!! Obviously not Shep proof it was quite easy. if you have ever had the misfortune to drive a 2.2 diesel hilux you will know how a pushbike has more power. so to get a burnout out of it what i used to do was roll forwards down a steep hill hopefully get up to about 50 odd KPH and then drop the clutch it reverse. it was fairly interesting.
|
|
| Author: | TZAR [ Wed May 20, 2009 11:16 pm ] |
| Post subject: | Re: how to remove broken bolts part 1 |
http://www.urbandictionary.com/define.php?term=Shepped Better than wiki 
|
|
| Author: | TZAR [ Wed May 20, 2009 11:19 pm ] |
| Post subject: | Re: how to remove broken bolts part 1 |
other defnitions Shep shot http://www.urbandictionary.com/define.p ... hep%20Shot Shep http://www.urbandictionary.com/define.php?term=Shep%20 shep The loud uncouth sound made when a drunken Welshman is startled by a sheep. 'hoe-elly furck a shep!' |
|
| Author: | Bruce [ Wed May 20, 2009 11:58 pm ] |
| Post subject: | Re: how to remove broken bolts part 1 |
http://www.urbandictionary.com/define.php?term=Shepped Mike was felching Noddy and he coughed and fell over and "shepped" the table. Bwhahahahahahaahah
|
|
| Author: | ball [ Thu May 21, 2009 12:00 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
HAHAHA The legend lives on
|
|
| Author: | shep [ Thu May 21, 2009 12:09 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
you lot can just go and get fucked 
|
|
| Author: | ball [ Thu May 21, 2009 12:12 am ] |
| Post subject: | Re: how to remove broken bolts part 1 |
4 Shep Singular of sheep. Very dangerous when corned and good at running infront of cars in Devon. What's that shep doing in the middle of the road? Wonder if I can hit it.... 12 shep A mildly retarded sheep which exhibits self-destructive tendencies, and is good for kicking. "Aww, man, that shep took it right in the face. Let's try again." Brilliant
|
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|