[salih]

hey all im buying a 1.3 sierra transfercase and rear tailshaft (from transfer to rear diff)

dos any body know roughtly how much thise 2 wouled weigh ?
the blokes post code is 2533 mine is 3338 any one know of any cheap couriers ? maybe in his area ?

thanks all

[atari4x4]

SierraDan wrote:

Complete Sierra transfer case with flanges and no oil is 19kg

get onto e-go.com http://www.e-go.com.au/home.do;jsession ... FCA6F13A21

put a bit insurance cover on it, to ensure it gets delivered.

no idea on the shaft weight, all i know mine is long & heavy... well that's what the ladies say.

[salih]

lol !
nice one thanks bro !
il have a look.

any one know what the shaft might wey for a swb ?

[Jackson]

I sent a transfer and swb shaft I think I said it was about 25 kg

e-go is good, sent a few things with them, received a few things with them. Sometimes it can take a little while but it is cheap compared to everyone else.

If the person takes the mounts off, turns the case on a bit of an angle it should fit in a milk crate and the shaft should have a bit of room to get in there as well.

[atari4x4]

can't see a rear tailshaft fitting in a milk crate without shepping it first.

[salih]

hmm im not shure hes that help full

iv gone on the site and its asking for messure ments lol
i put like 32cmx20x30 or some thing like that nerly $50
but then again im not shure iv clicked the right things lmao
im shit with couriers stuff...

what to do his thinking of going down to the post office but that wouled cost heaps yeah ?
also can he just glad wrap it or dos it have to be some fancy wraping shit ?

[DarkHorse]

I doubt oz post would take it, and if they did it would cost a bomb.

[Jackson]

atari4x4 wrote:

can't see a rear tailshaft fitting in a milk crate without shepping it first.

A SWB sierra rear is only 40cm long. Wouldn't stick out much.

[salih]

ok he got back to me
its 24.9 kgs so very close but he tock some things i dident need of..
and its 340mm 429mm 250mm

now to find a courier... lol

[stockman]

Has he packed it in a metal crate or something.
With 6.5's there 19.5kg wrapped in cardboard and placed in a box.
Auspost will take it.

[salih]

nah i told him just glad wrap the shit out of it lol
its just a stock 1.3 case
so if he puts it into a cardboard box auspost might take it ??

[DarkHorse]

20kg limit, and 140cm girth limit, so don't like your chances.
http://auspost.com.au/personal/parcel-dimensions.html

[salih]

fuk.....

[stockman]

I've sent two with aus post. 19.5kg is under 20kg

The last one was 19.5 and that included the rags it was wrapped in and gear stick and packed in a box.

Here is a brand new transfer, with 6.5's and no oil or stick:



17.62kg

[salih]

Yeah but mine is coming with the drive shaft the sticks one of the thing that holds the case so it ads up.. Il have to try find a cheap courier company now..

[atari4x4]

doesn't get any cheaper than e-go.com http://www.e-go.com.au/home.do;jsession ... FCA6F13A21

[stockman]

I'd rather pay twice and do two packages and still use auspost. eghey can't even get there own game right.
or
http://transdirect.com.au/

[salih]

Well thanks for the advice guys when I get home il have a look around.

[DarkHorse]

stockman wrote:

I've sent two with aus post. 19.5kg is under 20kg

Yeah, but if you're that close a bi-wall box would just about tip you over the limit. Sometimes they'll let you get away with a bit over on size or weight, but not often both.

I just know how much I hate standing in line for half an hour only to be sent away because I was a few cm over the max dimension.

I reckon e-go would be cheaper anyway.

[salih]

ok... i know this is alot to ask for but i am fuking shit with this courier computer shit...
couled some one plz make the quet for me so i can just pay it ??
plzzz

his in minnamurra 2533
the package is 24.9kg 340/429/250mm

i can pick it up in the melbourne cbd

iv had a look on there site and there is no depo in his area so it wouled have to be from his house
but they got a depo i can pick up in in melbourne cbd

i hope this is enought info can any one help me out plz ?

[Daves4wd]

Get it dropped off at camberfeild

[salih]

yeah thats what im doing iv figured out how to use the site just need the guys address and shit now..