auszookers.com • View topic - Timing marks f10a

Board index » Talking About Stuff » N00b Talk

Timing marks f10a

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

ljeade

newbie

Joined: Fri Oct 02, 2015 9:16 am
Posts: 4
Vehicle: 83 Suzuki Sierra

Posted: Wed Feb 17, 2016 5:16 pm

Hi all, I'm a bit stuck and need help. F10a motor. Have put another head on but not sure how to do the timing from scratch. I've got a Haynes manual, however it's seems to only detail the straight forward disassemble / reassemble process and not what to do when you have new components and no markings ect..
What I need to know is how to set the cam timing so it matches the crank ready to install the timing belt and how to position the dizzy. Also there are 2 keyway positions on the cam sprocket with 1 dot and 2 dots and am not sure which one should line up with the keyway?

ljeade

newbie

Joined: Fri Oct 02, 2015 9:16 am
Posts: 4
Vehicle: 83 Suzuki Sierra

Posted: Sat Feb 20, 2016 8:34 pm

Seriously? No one?

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Sun Feb 21, 2016 8:31 am

Crank is mark/key straight up, there will be a mark on the block
Cam goes in the notch 180' from the E Mark and when timed the e mark is straight up. Will line up with knotch on back timing cover plate

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

ljeade

newbie

Joined: Fri Oct 02, 2015 9:16 am
Posts: 4
Vehicle: 83 Suzuki Sierra

Posted: Sun Mar 06, 2016 12:26 pm

Solved, thanks for all the help..

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » N00b Talk

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum