auszookers.com https://auszookers.com/forum/
Mounting thermo fans https://auszookers.com/forum/viewtopic.php?f=37&t=31788	Page 1 of 1

---

Author:	Mouse [ Thu Apr 12, 2012 11:08 am ]
Post subject:	Mounting thermo fans
Has anyone got any pics or ideas on the best way to mount a thermo fan? Thanks james

---

Author:	SierraDan [ Thu Apr 12, 2012 11:53 am ]
Post subject:	Re: Mounting thermo fans
I mounted mine with the provided bolts/washers etc in the thermo kit, in line with the engine fan so it sucks through harder, cooling very well.

---

Author:	Mouse [ Thu Apr 12, 2012 3:03 pm ]
Post subject:	Re: Mounting thermo fans
My fan has no mount brackets bolts etc

---

Author:	matty_wall [ Thu Apr 12, 2012 3:30 pm ]
Post subject:	Re: Mounting thermo fans
washers and zipties.

---

Author:	Fatzook [ Thu Apr 12, 2012 4:19 pm ]
Post subject:	Re: Mounting thermo fans
I made a stainless mounting plate/ shroud and bolted to that. sorry about the shitty pics.

---

Author:	Red89 [ Thu Apr 12, 2012 7:20 pm ]
Post subject:	Re: Mounting thermo fans
You can buy the proper zip ties for them from repco etc but they arent cheap considering they are just 4 zip ties and foam pads. This is my thermo.

---

Author:	Mouse [ Thu Apr 12, 2012 7:46 pm ]
Post subject:	Re: Mounting thermo fans
Thanks pics were very helpful now have a job for the weekend

---

Author:	GRPABT1 [ Thu Apr 12, 2012 8:07 pm ]
Post subject:	Re: Mounting thermo fans
When my old fan died (it had the thin bolts through the radiator) I went and bought a supercheapy calibre branded one (12"?) and it fit perfectly with the stuff provided in the kit to bolt onto the radiator side frame instead of through the fins. Bonus was it seems to flow alot more than my old one and is still going strong a couple years later.

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/