| auszookers.com https://auszookers.com/forum/ |
|
| What the hell goes here please? G16b EFI https://auszookers.com/forum/viewtopic.php?f=37&t=32777 |
Page 1 of 1 |
| Author: | tonyevans [ Mon May 21, 2012 3:57 pm ] |
| Post subject: | What the hell goes here please? G16b EFI |
I am fixing up a G16B EFI Motor that cam with no head - I have got a new head and sorted out most of the pieces but I can not find anything that will fit over this hole in the rear end of the head - I guess it went AWOL with the old head. If you can tell me what I am missing it would be of help and better still would be a picture. This is the hole picture so to speak   If you have one of whatever it is to sell would be even better. |
|
| Author: | Scrawny [ Mon May 21, 2012 3:58 pm ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
Water way for front wheel drive motors. It just has a blanking plate for us with rwd's |
|
| Author: | Fatzook [ Mon May 21, 2012 4:05 pm ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
That is where the thermostat housing is located on a baleno motor ( same head ). As Scrawn said...... blank it off. |
|
| Author: | tonyevans [ Mon May 21, 2012 4:12 pm ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
Thanks Guys - Anyone have a plate? |
|
| Author: | want33s [ Mon May 21, 2012 6:41 pm ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
My G16B has a plate with a spout for one of the heater hoses. I think I have one here. I'll dig around on the morrow. |
|
| Author: | royce [ Tue May 22, 2012 6:43 am ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
yes a water outlet goes there for the heater in my vitara now a vitara doesnt have a heater tap to turn the coolant flow off so I wonder if Suzuki didnt want coolant to be flowing out that end of the head all the time Also, you cant put the head bolts in with the cam fitted, youll have to take all that off 
|
|
| Author: | tonyevans [ Tue May 22, 2012 7:48 am ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
Want33's - Just checked and yes there is a heater hose laying there so if you have one - Pretty Please ;<} Royce - Yes the cam is just temp - Trying to make sure I have everything - Thanks |
|
| Author: | want33s [ Tue May 22, 2012 11:06 am ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
Tony here is the offender...  I tried to call you earlier to see if you need any of the other bits that bolt to the head like the little steel plates that support the top of the timing cover. |
|
| Author: | tonyevans [ Tue May 22, 2012 1:06 pm ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
want33s wrote: Tony here is the offender... I tried to call you earlier to see if you need any of the other bits that bolt to the head like the little steel plates that support the top of the timing cover. That is the little sucker I imagined - I tried to ring you back a couple of times but you must be out of range or busy with something Yes I would like the plates to if you have them - I was going to make some but your way is easier 
|
|
| Author: | want33s [ Tue May 22, 2012 1:09 pm ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
No worries I'll send them off this arvo. |
|
| Author: | DarkHorse [ Tue May 22, 2012 8:36 pm ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
Anything other little bits you need Tony let me know, I'm collecting my car and old head tomorrow. |
|
| Author: | tonyevans [ Wed May 23, 2012 7:51 am ] |
| Post subject: | Re: What the hell goes here please? G16b EFI |
DarkHorse wrote: Anything other little bits you need Tony let me know, I'm collecting my car and old head tomorrow. I need a good pair of front seats (1992 Vitara) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|