I was just doing a bit of a google search and found this
I was only wanting to take the front off (yellow arrow) not the whole thing. Is it easier to take off the whole front?
| auszookers.com https://auszookers.com/forum/ |
|
| Disassembling the front of a coily https://auszookers.com/forum/viewtopic.php?f=37&t=33065 |
Page 1 of 1 |
| Author: | shlonga86 [ Fri Jun 01, 2012 5:20 pm ] |
| Post subject: | Disassembling the front of a coily |
Hi guys, zook n00b here, Looking for some advice on taking the front of my 96 Sierra. I wanna take the whole front off and replace it because it has been crashed but I havent toyed around with a zook before and after undoing all the bolts i could find (which wasnt many) the front was still holding on tight. any done this before and will to guide me? Cheers, Scott |
|
| Author: | shlonga86 [ Fri Jun 01, 2012 5:45 pm ] |
| Post subject: | Re: Disassembling the front of a coily |
I was just doing a bit of a google search and found this I was only wanting to take the front off (yellow arrow) not the whole thing. Is it easier to take off the whole front? |
|
| Author: | Rusho [ Fri Jun 01, 2012 6:44 pm ] |
| Post subject: | Re: Disassembling the front of a coily |
You have to take the whole thing off mate. It's a complete unit as you see it sitting there. The yellow bit is spot welded to the side guards 
|
|
| Author: | shlonga86 [ Fri Jun 01, 2012 7:29 pm ] |
| Post subject: | Re: Disassembling the front of a coily |
Ahhh, probably why it wouldn't come off haha. Cheers rusho! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|