ok people, its stupid question time again
i am replacing the jets in my 1.3l sierra, standard asian carby, and i have no idea where they are or how to get to them, lol..
any info is appreciated, pics are good too
| auszookers.com https://auszookers.com/forum/ |
|
| carby jets??? https://auszookers.com/forum/viewtopic.php?f=37&t=33726 |
Page 1 of 1 |
| Author: | azloki [ Wed Jun 27, 2012 8:52 pm ] |
| Post subject: | carby jets??? |
ok people, its stupid question time again i am replacing the jets in my 1.3l sierra, standard asian carby, and i have no idea where they are or how to get to them, lol.. any info is appreciated, pics are good too
|
|
| Author: | atari4x4 [ Wed Jun 27, 2012 8:59 pm ] |
| Post subject: | Re: carby jets??? |
why are you replacing them, are you fitting larger ones? |
|
| Author: | azloki [ Wed Jun 27, 2012 9:25 pm ] |
| Post subject: | Re: carby jets??? |
yup
|
|
| Author: | atari4x4 [ Wed Jun 27, 2012 9:33 pm ] |
| Post subject: | Re: carby jets??? |
viewtopic.php?f=5&t=29725&p=540556&hilit=sierra+carby+rebuild#p540556 http://www.youtube.com/watch?feature=pl ... mJHc3YjwPQ they're in there somewhere |
|
| Author: | azloki [ Wed Jun 27, 2012 9:53 pm ] |
| Post subject: | Re: carby jets??? |
rofl, that is my thread, lucky im getting a memory test done soon, lol... |
|
| Author: | azloki [ Sat Jun 30, 2012 12:53 am ] |
| Post subject: | Re: carby jets??? |
memory test? fail, patience test is a bigger" fail, using the search feature on this site? massive fail.. so now ive got the jets in and once warm it runs sweet and can definitely feel the difference, now its a matter of curiosity and needing to get the thing starting a bit better when cold, so obviously i need to make some adjustments, im just not sure what the 2 screws on the carby adjust and which one i should adjust for the cold start ? |
|
| Author: | zukmeista [ Sat Jun 30, 2012 12:28 pm ] |
| Post subject: | Re: carby jets??? |
Those two screws won't help you. The one at the base of the carby adjusts the idle mixture, the other one adjusts hot idle speed. |
|
| Author: | azloki [ Sat Jun 30, 2012 2:28 pm ] |
| Post subject: | Re: carby jets??? |
what about the one under the throttle cable? |
|
| Author: | zukmeista [ Sat Jun 30, 2012 2:42 pm ] |
| Post subject: | Re: carby jets??? |
azloki wrote: what about the one under the throttle cable? That is "the other one" |
|
| Author: | Scrawny [ Sat Jun 30, 2012 2:57 pm ] |
| Post subject: | Re: carby jets??? |
What jets did you put in it? You may want to drop back down to a close-to-standard size jet for primary and a bigger for secondary. Otherwise play with the choke and make sure that's adjusted right and working properly. |
|
| Author: | azloki [ Sat Jun 30, 2012 3:05 pm ] |
| Post subject: | Re: carby jets??? |
on one of the carbys i have it has 3 screws, and the one under the throttle cable i thought was the choke adjustment one? but in saying that how exactly do u adjust the choke? the one that i have on the car now only has 2 screws.. |
|
| Author: | zukmeista [ Sat Jun 30, 2012 3:21 pm ] |
| Post subject: | Re: carby jets??? |
Sorry I wouldn't know as mine has a manual choke. |
|
| Author: | azloki [ Sun Jul 01, 2012 6:50 pm ] |
| Post subject: | Re: carby jets??? |
ok, got it all together and so on now i have a ferral flat spot when i try to take off, im thinking it maybe not getting enough fuel which i can fix by putting an electric fuel pump on which i was going to do anyway??? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|