| auszookers.com https://auszookers.com/forum/ |
|
| WT T-case breathers https://auszookers.com/forum/viewtopic.php?f=37&t=33981 |
Page 1 of 1 |
| Author: | Scales [ Sun Jul 08, 2012 8:22 pm ] |
| Post subject: | WT T-case breathers |
Hey guys, having a noob day Ive done the rebuild on my wt case, right up to putting the last housing on. I dont want to fit it until i have fitted a right-angle threaded barb to the case for a breather hose. My question is, does the "nipple" that is on these cases pop out at all? Looking from the inside it looks like it should, but i dont want to hack at it unless i know for sure. Or do people just drill the hole out a bit and tap it from there? Cheers all By the way, im not talking about the breather cap |
|
| Author: | Mike57 [ Sun Jul 08, 2012 10:04 pm ] |
| Post subject: | Re: WT T-case breathers |
Once you pull off the cap and the spring underneath it there is a small aluminium piece with the lip on it pulls out completely. It is a sort of force fit in the casing. After that is removed you can tap directly into the case. |
|
| Author: | Scales [ Sun Jul 08, 2012 10:09 pm ] |
| Post subject: | Re: WT T-case breathers |
sweeet, cheers mate. Ill attack it with a pair of vice grips in the morning. |
|
| Author: | Blakey [ Thu Jul 12, 2012 3:08 pm ] |
| Post subject: | Re: WT T-case breathers |
Scales wrote: sweeet, cheers mate. Ill attack it with a pair of vice grips in the morning. why not knock it out from the inside with simmilar sized piece of metal? |
|
| Author: | mrw82 [ Thu Jul 12, 2012 8:04 pm ] |
| Post subject: | Re: WT T-case breathers |
because there is a deflector/casting in the way on the inside of the case. you don't have clear access to it. |
|
| Author: | Scales [ Fri Jul 13, 2012 4:44 pm ] |
| Post subject: | Re: WT T-case breathers |
what he said. it stops the oil flicking up into the breather. was easy to remove with vicegrips, it gripped the soft metal well. i just wanted confirmation it actually came out, cos it practically destroyed it. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|